Interchange Complexity Model and Related Safety Implications
Publication: Journal of Transportation Engineering
Volume 139, Issue 5
Abstract
Freeway interchanges accommodate large traffic volumes within a constrained area. When their design is complex and includes unexpected features, it may increase drivers’ workloads and lead to driving errors, thus increasing the likelihood of a crash. The study’s goal is to provide a tool for assessing the safety impacts of interchange complexity, promoting a simpler and safer design. This paper presents an interchange complexity model (ICM) that is based on estimations of aggregated drivers’ workload in interchanges. A database of 25 interchanges from the New Jersey interstate road system was used to examine the ICM and construct a resulting crash prediction model by comparing their interchange complexity index (ICI) with three years of crash data. Further on, nine additional interchanges were analyzed similarly in order to validate both the use of the ICM and the resulting crash prediction models. Actual observations of the validation data were relatively close to average model predictions. It is proposed that highway planners could use the ICM for estimating the complexity of interchange design alternatives and the implications for road safety to minimize driver errors and thus reduce crash occurrences.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Association of State Highway and Transportation Officials (AASHTO). (2004). “A policy on geometric design of highways and streets.” AASHTO, Washington, DC.
Alicandri, E., and Woergeide, K. (1999). “Human factors and highway safety.” 69th Annual Meeting of the Institute of Transportation Engineers: Transportation Frontiers for the Next Millenium, Institute of Transportation Engineers, Las Vegas, NV.
ArcGIS 10 [Computer software]. (2010). Esri, Redlands, CA.
Bauer, K. M., and Harwood, D. W. (1998). “Statistical models of accidents on interchange ramps and speed-change lanes.”, Federal Highway Administration (FHwA), Washington, DC, 〈http://ntl.bts.gov/DOCS/97-106/index.htm〉 (Aug. 2, 2010).
Blanco, M., Biever, W. J., Gallagher, J. P., and Dingus, T. A. (2006). “The impact of secondary task cognitive processing demand on driving performance.” Accid. Anal. Prev., 38(5), 895–906.
Bonneson, J., Zimmerman, K., and Fitzpatrick, K. (2005). “Interim roadway safety design workbook.”, Texas Transportation Institute, College Station, TX, 〈http://tti.tamu.edu/documents/0-4703-P4.pdf〉 (Jan. 14, 2011).
Brown, J. L. (2003). “Ramping up.” Civ. Eng., 73(10), 56–63.
Bureau of Transportation Statistics. (2010). “Highway performance monitoring system, region 2.” National Transportation Atlas Database, Research and Innovative Technology Administration, Washington, DC, 〈http://www.bts.gov/publications/national_transportation_atlas_database/2010/〉 (May 2, 2011).
Cantin, V., Lavalliere, M., Simoneau, M., and Teasdale, N. (2009). “Mental workload when driving in a simulator: Effects of age and driving complexity.” Accid. Anal. Prev., 41(4), 763–771.
Chen, H., Liu, P., Lu, J. J., and Behzadi, B. (2009). “Evaluating the safety impacts of the number and arrangement of lanes on freeway exit ramps.” Accid. Anal. Prev., 41(3), 543–551.
Cirillo, J. A. (1968). “Interstate system accident research study II, interim report, part II.” Public Roads, 35(3), 71–75.
Eenink, R., Reurings, M., Elvik, R., Cardoso, J., Wichert, S., and Stefan, C. (2008). “Accident prediction models and road safety impact assessment: Recommendations for using these tools.” 〈http://ec.europa.eu/transport/roadsafety_library/publications/ripcord_d02_road_safety_impact_assessment.pdf〉 (Jan. 18, 2012).
ESRI. (2010a). “North America highways [data layer package].” ArcGIS Resource Center: Tele Atlas North America, 〈http://www.ArcGIS.com/home/item.html?id=e8a316cc5ab44da8962108ff8c59dc6c〉 (Mar. 5, 2011).
ESRI. (2010b). “USA Minor Highways [Data Layer Package].” Source: Tele Atlas North America, 〈http://www.ArcGIS.com/home/item.html?id=259cbffa70e140bebfc9073d73cd63e1〉 (Mar. 5, 2011).
Federal Highway Adminstration (FHwA). (2009). “Manual on Uniform Traffic Control Devices.” 〈http://mutcd.fhwa.dot.gov/pdfs/2009/pdf_index.htm〉 (Oct. 21, 2010).
Gibreel, G. M., Easa, S. M., Hassan, Y., and El-Dimeery, I. A. (1999). “State of the art of highway geometric design consistency.” J. Transp. Eng., 125(4), 305–313.
GoogleEarth 6.0 [Computer software]. Google, Mountain View, CA.
Hancock, P. A., Wulf, G., Thom, D., and Fassnacht, P. (1990). “Driver workload during differing driving maneuvers.” Accid. Anal. Prev., 22(3), 281–290.
Highway Capacity Software 2000 (Version 4.1b) [Computer software]. McTrans Center, University of Florida, Gainsville, FL.
Horberry, T., Anderson, J., Regan, M. A., Triggs, T. J., and Brown, J. (2006). “Driver distraction: the effects of concurrent in-vehicle tasks, road environment complexity and age on driving performance.” Accid. Anal. Prev., 38(1), 185–191.
Konstantopoulos, P., Chapman, P., and Crundall, D. (2010). “Driver’s visual attention as a function of driving experience and visibility: Using a driving simulator to explore drivers’ eye movements in day, night, and rain driving.” Accid. Anal. Prev., 42(3), 827–834.
Lamm, R., Cafiso, S., La Cava, G., and Beck, A. (2005). “To what extent the human being is so far regarded in modern highway geometric design—an international review and a personal outlook.” 3rd Int. Symp. on Highway Geometric Design, Transportation Research Board (TRB), Chicago, IL.
Liu, B.-S. (2007). “Association of intersection approach speed with driver characteristics, vehicle type and traffic conditions comparing urban and suburban areas.” Accid. Anal. Prev., 39(2), 216–223.
Liu, B.-S., and Lee, Y.-H. (2006). “In-vehicle workload assessment: Effects of traffic situations and cellular telephone use.” J. Saf. Res., 37(1), 99–105.
Mattar-Habib, C., Polus, A., and Farah, H. (2008). “Further evaluation of the relationship between enhanced consistency model and crash-rates of two-lane rural roads in Israel and Germany.” Eur. J. Transp. Infrastruct. Res., 8(4), 320–332.
McCartt, A. T., Northrup, V. S., and Retting, R. A. (2004). “Types and characteristics of ramp-related motor vehicle crashes on urban interstate roadways in Northern Virginia.” J. Saf. Res., 35(1), 107–114.
Messer, C. J., Mounce, J. M., and Brackett, R. Q. (1981). “Highway geometric design consistency related to driver expectancy, vol. I-III.”, FHwA, Washington, DC.
New Jersey Dept. of Transportation (NJDOT). (2006). “I295/I76/Route 42 direct connection project, Camden County, New Jersey: Project purpose and need.” State of New Jersey Department of Transportation, Trenton, NJ.
New Jersey Dept. of Transportation (NJDOT). (2010). “Crash records [data sets 2007-2009].” 〈http://www.state.nj.us/transportation/refdata/accident/rawdata01-03.shtm〉 (Mar. 2011).
Patten, C. J., Kircher, A., Ostlund, J., Nilsson, L., and Svenson, O. (2006). “Driver experience and cognitive workload in different traffic environments.” Accid. Anal. Prev., 38(5), 887–894.
Polus, A., Pollatschek, M. A., and Farah, H. (2005). “Impact of infrastructure characteristics on road crashes on two-lane highways.” Traffic Inj. Prev., 6(3), 240–247.
Sharp, W. (2003). “Can overhead signing guide the design of system interchanges?” Institute of Transportation Engineers 2003 Annual Meeting and Exhibit, Institute of Transportation Engineers, Seattle, WA.
Transportation Research Board (TRB). (2010). Highway capacity manual, Washington, DC.
Twomey, J. M., Heckman, M. L., Hayward, J. C., and Zuk, R. J. (1993). “Accidents and safety associated with interchanges.” Transp. Res. Rec., (1385), 100–105.
Wooldridge, M. D. (1994). “Design consistency and driver error.” Transp. Res. Rec., (1445), 148–155.
Information & Authors
Information
Published In
Journal of Transportation Engineering
Volume 139 • Issue 5 • May 2013
Pages: 458 - 466
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jun 10, 2012
Accepted: Oct 31, 2012
Published online: Nov 3, 2012
Published in print: May 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.