Predicting Lane Utilization and Merge Behavior at Signalized Intersections with Auxiliary Lanes in Buffalo, New York
Publication: Journal of Transportation Engineering
Volume 138, Issue 9
Abstract
Although auxiliary through lanes (ATLs) are often used to increase the capacity at signalized intersections, their utilization by motorists tends to be significantly lower than continuous through lanes (CTLs). This study was designed to (1) determine whether recently proposed models for predicting lane-drop utilization are applicable to Buffalo, New York; (2) develop new models for predicting ATL utilization and for predicting drivers’ merge behavior at ATLs; and (3) assess the ability of microscopic traffic simulation models to reproduce observed merging behavior. To achieve this, geometric, traffic count, and merge data were collected from select sites in Buffalo. The study shows that lane utilization in Buffalo is a function of total through-traffic volume, right-turning volume, and upstream and downstream land-use types. The average merge distance, in contrast, tends to be a function of the ATL total length, the first lane-drop warning sign, the speed limit, and the total through-traffic volume. The study also identified the challenges of calibrating merge behavior in microscopic traffic simulation models against field observations.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Research for this project was partially funded by the University at Buffalo (UB), the State University of New York. The authors would like to thank UB for making this work possible.
References
Altson, M., Rouphail, N. M., Schroeder, B., and Hummer, J. E. (2010). “Simulation-based support for evaluating auxiliary through lanes at signalized intersections.” Proc., 89th Annual Transportation Research Board Meeting, Transportation Research Board, National Research Council, Washington, D.C.
Hummer, J. E. (2000). “Operational effects of new ‘double wide’ intersection design on suburban arterials.” 79th Annual Transportation Research Board Meeting, Transportation Research Board, Washington, D.C.
Hurley, J. W. (1995). “Utilization of auxiliary through lanes at signalized intersections.”, Transportation Research Board, National Research Council, Washington, D.C., 50–57.
Institute of Transportation Engineers (ITE). (1997). Trip generation manual, 6th Ed., ITE, Washington, D.C.
Ledbetter, J. D., and Hummer, J. E. (1991). “A preliminary study of the congestion relief potential of auxiliary through lanes at signalized intersections.” ITE Meeting Compendium of Technical Papers, Institute of Transportation Engineers (ITE), Washington, D.C., 38–42.
Lee, J.-J., Hummer, J. E., and Rouphail, N. M. (2005). “False capacity for lane drops.”, North Carolina Dept. of Transportation and North Carolina State Univ., Raleigh, NC.
McCoy, P. T., and Tobin, J. R. (1982). “Use of additional through lanes at signalized intersections.”, Transportation Research Board, National Research Council, Washington, D.C., 1–5.
Nevers, B. et al. (2011). “Guidelines on the use of auxiliary through lanes at signalized intersections.” NCHRP Final Report No. 707, Transportation Research Board, National Research Council, Washington, D.C.
Tarawneh, M. S. (2000). “Utilization of auxiliary through lanes at intersections of four-lane two-way roadways.”, Transportation Research Board, National Research Council, Washington, D.C., 26–33.
Transportation Research Board (TRB). (2010). Highway capacity manual (HCM) 2010, TRB, National Research Council, Washington, D.C.
VISSIM 5.30 [Computer software]. PTV America, Portland, OR.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: May 24, 2011
Accepted: Mar 6, 2012
Published online: Mar 8, 2012
Published in print: Sep 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.