Using Naturalistic Field Operational Test Data to Identify Horizontal Curves
Publication: Journal of Transportation Engineering
Volume 138, Issue 9
Abstract
Investigations to identify relationships between crashes and road features usually deal with effects of only one or two of the main components of traffic safety, i.e., human, vehicle, and infrastructure performance. There are several contributing factors of the components that together lead to a crash. This study devises an approach to include information from all three components in a system using field operational test (FOT) data. FOT data are recorded from real-life driving that is different from traffic simulations and specific on-site data collection. The study focuses on identifying horizontal curves using FOT and provides access to vehicle and human response data at the exact time when the vehicle drove in a specific location. A method has been developed to derive path radius and to identify start–end points of horizontal curves using FOT data. With this information, vehicle response signals and human behavior data can then be arranged on a common axis referenced to the curve. The approach also identifies lane changing maneuvers on curves that can be used to evaluate potential crash triggers. The application of this method allows for reviewing changes in the regulatory speed limit, curve geometry, or crash history and thus evaluates the design of curves and choosing appropriate countermeasures.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are grateful to SAFER—Vehicle and Traffic Safety Centre at Chalmers, Sweden, where this work was carried out and VCC (Volvo Cars Cooperation).
References
Alonso, M., Plaza, J., and Vega, H. (2007). “Human factors in road infrastructure design: Analysis of road layout influence on driver behavior.” Proc., Road Safety and Simulation, RSS, Rome, Italy.
Ardeshiri, T., and Kharrazi, S. (2006). “Sensor fusion for vehicle positioning in intersection active safety applications.” M.Sc. thesis, Chalmers Univ. of Technology, 8th Int. Symp. on Advanced Vehicle Control, Taipei, Taiwan.
Bärgman, J., and Svanberg, E. (2010). “Sweden-Michigan naturalistic field operational test (SeMiFOT) phase 1: WP 3 data management, final report.”, Chalmers Univ. of Technology, Gothenburg, Sweden.
Bonneson, J. (2000). “Superelevation distribution methods and transition designs.”, Transportation Research Board, National Research Council, Washington, DC.
Bonneson, J., Pratt, M., Miles, J., and Carlson, P. (2007). Horizontal curve signing handbook, Texas Transportation Institute, The Texas A&M Univ. System, College Station, TX, 18–19.
Box, G. E. P., Hunter, W. G., and Hunter, J. S. (2005). “Basics (probability, parameters, and statistics).” Chapter 2, Statistics for experimenters, Wiley, New York, 25–41.
Carlson, P., Burris, M., Black, K., and Rose, E. (2005). “Comparison of radius-estimating techniques for horizontal curves.”, 76–83.
Dingus, T. A. et al. (2006). “The 100-car naturalistic driving study phase II—Results of the 100-car field experiment.” U.S. Dept. of Transportation-Highway Safety, Virginia Tech Transportation Institute, Blacksburg, VA.
Donnell, E., Hines, S., Mahoney, K., Porter, R., and McGee, H. (2009). “Speed concepts: Informational guide.” U.S. Dept. of Transportation, Federal Highway Administration, Washington, DC.
Dupré, G., and Bisson, O. (2007). “Safety in curves on urban express roads.” Internal Rep. for Deliverable 2.1, European Commission 6th Framework Project Ranking for European Road Safety (RANKERS), Contract No., Brussels, Belgium.
EuroRAP. (2005). “EuroRAP-First Pan-European progress report.” EuroRAP AISBL, Brussels, Belgium.
FESTA (2008). “FESTA handbook: Field opErational teSt supporT Action.” Handbook, Deliverable 6.4, European Commission 7th Framework Project FESTA, Contract No. 21 4853 (FESTA Consortium), Brussels, Belgium.
Fink, K. L., and Krammes, R. A. (1995). “Tangent length and sight distance effects on accident rates at horizontal curves on rural two-lane highways.” Transp. Res. Rec., 1500, 162–168.
Gibreel, G. M., Easa, S. M., and El-Dimeery, I. A. (2001). “Prediction of operating speed on three-dimensional highway alignments.” J. Transp. Eng., 127(1), 21–30.
Glennon, J. C., Neuman, T. R., and Leisch, J. E. (1985). “Safety and operational considerations for design of rural highway curves.”, Federal Highway Administration, U.S. Dept. of Transportation, Washington, DC.
Glennon, J. C., and Weaver, G. D. (1972). “Highway curve design for safe vehicle operations.” Highway Res. Rec., 390, 15–26.
Hollnagel, E. (2004). Barriers and accident prevention, Univ. of Linköping, Sweden.
Imran, M., Hassan, Y., and Patterson, D. (2006). “GPS—GIS-based procedure for tracking vehicle path on horizontal alignments.” Comput.-Aided Civ. Infrastruct. Eng., 21(5), 383–394.
Krammes, R. A. et al. (1995). “Horizontal alignment design consistency for rural two-lane highways.”, Federal Highway Administration, U.S. Dept. of Transportation, Washington, DC.
Leonard, J., Bilse, D., and Recker, W. (1994). “Super-elevation rates at rural highway intersections.” Rep. No., Univ. of Carolina Institute of Transportation Studies, Irvine, CA.
Miller, E. J., and Steuart, G. N. (1982). “Vehicle lateral placements on urban roads.” Transp. Eng. J., 108(5), 495–508.
Murgel, G., and Hamilton, R. (1999). “Engineering surveying laboratory manual.” Lab manual No., Boise State Univ., Boise, ID, 65–68.
Neale, N., Dingus, T., Klauer, S., Sudweeks, J., and Goodman, M. (2005). “An overview of the 100-car naturalistic study and findings”. Proc., 19th Int. Technical Conf. on the Enhanced Safety of Vehicles, Paper No. 05-0400, National Highway Traffic Safety Administration (NHTSA), Washington, DC.
Othman, S., Thomson, R., and Lannér, G. (2009). “Identifying critical road geometry parameters affecting crash rate and crash type.” Proc., Annals of Advances in Automotive Medicine, AAAM, Barrington, IL, 53, 155–165.
Othman, S., Thomson, R., and Lannér, G. (2010). “Are driving and over-taking on right curves more dangerous than on left curves?.” Annals of Advances in Automotive Medicine, 54th Annual Scientific Conf., AAAM, Barrington, IL, 253–264.
Reymond, G., Kemeny, A., Droulez, J., and Berthoz, A. (2001). “Role of lateral acceleration in curve driving: Driver model and experiments on a real vehicle and a driving simulator.” Hum. Factors, 43(3), 483–495.
Sakshaug, K. (2000). “Overhøydens innvirkning på ulykkesfrekvens i kurver.” SINTEF rapport, Trondheim, Norway.
Sandin, J. (2008). “Aggregating case studies of vehicle crashes by means of causation charts.” Ph.D. thesis, Dept. of Applied Mechanics, Chalmers Univ. of Technology, Gothenburg, Sweden.
Staplin, L. et al. (1997). “Synthesis of human factors and highway safety research.” Vol. 2, Publication No. FHWA-RD-97-095, Federal Highway Administration, Washington, DC.
Steyer, R., Sossoumihen, A., and Weise, G. (2000). “Traffic safety on two-lane rural roads: New concepts and findings.” Proc., 2nd Int. Symp. on Highway Geometric Design Cologne, Road and Transportation Research Association, Cologne, Germany, 299–312.
Victor, T. et al. (2010a). “Sweden-Michigan naturalistic field operational test (SeMiFOT) phase 1: WP 5 evaluation of methodology.” Final Report, Chalmers Univ. of Technology, Gothenburg, Sweden.
Victor, T., Moeschlin, F., Hjälmdahl, M., and Ahlström, C. (2010b). “Sweden-Michigan naturalistic field operational test (SeMiFOT) phase 1. WP 5 evaluation of methodology.” Final Report, Chalmers Univ. of Technology, Gothenburg, Sweden.
Wong, J. Y. (2001). “Handling characteristics of road vehicles.” Chapter 5, Theory of ground vehicles, Dept. of Mechanical Aerospace Engineering, Carleton Univ., Ottawa, Canada, 281–282.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Jun 10, 2011
Accepted: Jan 6, 2012
Published online: Aug 15, 2012
Published in print: Sep 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.