Investigation into the Structural Performance of Pervious Concrete
Publication: Journal of Transportation Engineering
Volume 138, Issue 1
Abstract
To expand the applications of pervious concrete, additional research and testing must be conducted as to its structural performance. Distress surveys were performed on two field installations of pervious concrete subjected to equivalent traffic stresses as some collector streets in use for 20 years. The results of the distress survey were then used to calculate the pavement condition index (PCI) using the procedure from ASTM D6433. The PCI rating was considered to be a quantification of structural performance. The high PCI ratings of the thicker pervious concrete sections indicated that pervious concrete, when properly designed, is capable of being used for most residential streets and many collector streets for typical design life durations (20–30 years) while exhibiting satisfactory structural performance.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers of this paper would like to thank both Evolution Paving and Miles Sand & Gravel for allowing their pervious concrete installations to be used for this study and for their correspondence regarding any questions that arose. The writers would also like to thank Dr. David McLean and Dr. Haifang Wen for contributing their expertise to this project and Jon Thomle for his assistance with the many hours of experimental testing required.
References
AASHTO. (1993). AASHTO guide for design of pavement structures, Washington, DC.
ACI Committee 325. (2002). “Guide for design of jointed concrete pavements for streets and local roads.” ACI 325.12R-02, American Concrete Institute, Detroit, MI.
ACI Committee 330. (2008). “Guide for design and construction of concrete parking lots.” ACI 330R-08, American Concrete Institute, Detroit, MI.
ACI Committee 522. (2006). “Pervious concrete.” ACI 522R-06, American Concrete Institute, Detroit, MI.
ASTM. (2006). “Standard test method for resistance to degradation of small-size coarse aggregate by abrasion and impact in the Los Angeles machine.” C131, West Conshohocken, PA.
ASTM. (2007). “Standard practice for roads and parking lots pavement condition index surveys.” D6433, West Conshohocken, PA.
City of Minneapolis. (2009). “Pavement condition.” 〈http://www.ci.minneapolis.mn.us/results/pavement.asp〉 (Aug. 30, 2009).
Crouch, L. K., Cates, M. A., Dotson, V. J., Honeycutt, K. R., and Badoe, D. (2003). “Measuring the effective air void content of portland cement pervious pavements.” Cem., Concr., Aggregates, 25(1), 16–20.
Crouch, L. K., Pitt, J., and Hewitt, R. (2007). “Aggregate effects on pervious portland cement concrete static modulus of elasticity.” J. Mater. Civ. Eng., 19(7), 561–567.
Delatte, N. J., Miller, D., and Mrkajic, A. (2007). “Portland cement pervious concrete pavement: Field performance investigation on parking lot and roadway pavements.” RMC Research & Education Foundation.
Haselbach, L. H., and Freeman, R. M. (2007). “Effectively estimating in situ porosity of pervious concrete from cores.” J. ASTM Int., 4(7).
Huang, Y. H. (2004). Pavement analysis and design, 2nd Ed., Pearson Prentice Hall, Upper Saddle River, NJ.
Local Streets & Roads Group of San Francisco Bay Area Partnership. (2007). Saving our street: A strategic plan for maintaining the Bay Area’s local streets and roads, San Francisco, 〈http://dpw.lacounty.gov/gmed/slsr2/MTC%20Strategic%20Plan.pdf〉 (Jul. 16, 2009).
Montes, F., Valavala, S., and Haselbach, L. M. (2005). “A new test method for porosity measurements of portland cement pervious concrete.” J. ASTM Int., 2(1), 1–13.
Offenberg, M. (2009). “Proving pervious concrete’s durability: A proposed test method helps producers assess the surface durability of pervious pavement.” Concrete Producer Magazine, 〈http://www.theconcreteproducer.com/industry-news.asp?sectionID=1419&articleID=840824&artnum=1〉 (Jul. 16, 2009).
Raymond, R. (2004). Pavement performance considerations for heavy traffic loads, Division of Public Works and Utilities, City of Spokane, WA.
Stroup-Gardiner, M. (2008). “State, municipal, county delegates get facts at California conference.” Pavement Preservation Journal, 2(1), 22–25.
Tennis, P., Leming, M., and Akers, D. (2004). Pervious concrete pavements, Portland Cement Association, Skokie, IL.
Wang, C., Salmon, C., and Pincheira, J. (2007). Reinforced concrete design, Wiley, Hoboken, NJ.
Yang, J., and Jiang, G. (2003). “Experimental study on properties of pervious concrete pavement materials.” Cem. Concr. Res., 33(3), 381–386.
Yang, Z., Ma, W., Shen, W., and Zhou, M. (2008). “The aggregate gradation for the porous concrete pervious road base material.” J. Wuhan Univ. Technol., Mater. Sci. Ed., 23(3), 391–394.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Dec 3, 2009
Accepted: Jun 6, 2011
Published online: Jun 8, 2011
Published in print: Jan 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.