Design of Rail-Track Geometric Systems by Satellite Measurement
Publication: Journal of Transportation Engineering
Volume 138, Issue 1
Abstract
In this article a new method of designing railway track geometry is introduced. This method is adapted to the technique of global positioning system (GPS) surveying. In the presented method, the basic data necessary to project railway line modernization (the arterial directions of routes and their intersection angles as well as the coordinates of the existing rail-track axis) are obtained through continuous rail-track satellite measurements using antennas installed on mobile rail vehicle. Because the shaping of straight-line track with satellite measurements does not cause any difficulty, attention was given to designing bending sections. It has been assumed that the geometric track layout will be designed on the basis of an appropriate working system of coordinates. Then, some transformation of the acquired solution will be conveyed to the global system. The whole analysis together with the included theoretical equations is aimed at developing a concept of the rail-track system that will be as friendly in practice as possible. Therefore, it has been illustrated with a calculation example, taking advantage of data obtained from a railway line in use.
Get full access to this article
View all available purchase options and get full access to this article.
References
Andrade, A. R., and Teixeira, P. F. (2011). “Uncertainty in rail-track geometry degradation: Lisbon-Oporto line case study.” J. Transp. Eng., 137(3), 193–200.
Baluch, H. (1983). Optimization of track geometrical systems, WK&L, Warsaw, Poland (in Polish).
Bosy, J., Graszka, W., and Leonczyk, M. (2007). “ASG-EUPOS—A multifunctional precise satellite positioning system in Poland.” Eur. J. Navigation, 5(4), 2–6.
Hofmann-Wellenhof, B., Lichtenegger, H., and Collins, J. (1997). GPS theory and practice, 4th Ed., Springer, Vienna, Austria.
Koc, W. (2010). “Designing of the rail track’s geometrical systems with the adjustment for the GPS system.” Scientific and Technical Papers of Association of Engineers and Technicians RP in Cracow, Series: Conf. Proc., Cracow, Poland, 154(95), 291–305 (in Polish).
Koc, W. et al. (2009). “Determining of the railway track route by satellite measurements.” Second Sci.-Tech. Conf. Design, Building and Maintenance of Infrastructure in Rail Transportation INFRASZYN 2009, Scientific Publishing ITE-PIB, Radom, Poland, 170–187 (in Polish).
Koc, W., and Specht, C. (2009). “Satellite railway track measurement results.” Technika Transportu Szynowego, 15(7–8), 58–64 (in Polish).
Koc, W., and Specht, C. (2010). “Application of the Polish active GNSS geodetic network for surveying and design of the railroad.” First Int. Conf. on Road and Rail Infrastructure—CETRA 2010, Univ. of Zagreb, Zagreb, Croatia, 757–762.
Koc, W., Specht, C., Lewinski, L., and Chrostowski, P. (2010a). “Geometrical adjustment of the railway track in the condition of the satellite surveying (Research program).” Scientific and Technical Papers of Association of Engineers and Technicians RP in Cracow, Series: Conf. Proc., Cracow, Poland, 154(95), 307–326 (in Polish).
Koc, W., Wilk, A., Chrostowski, P., and Grulkowski, S. (2010b). “Determination of the transverse resistance characteristics in railway track.” J. Transp. Eng., 136(12), 1057–1067.
Korn, G. A., and Korn, T. M. (1968). Mathematical handbook for scientists and engineers, McGraw-Hill, New York.
Mieloszyk, E., and Koc, W. (1991). “General dynamic method for determining transition curve equations.” Rail Int./Schienen der Welt, 22(10), 32–40.
Oruba, A., Leonczyk, M., Ryczywolski, M., Leonczyk, M., and Wajda, S. (2009). “ASG-EUPOS after one year.” Geodeta—Magazyn Geoinformacyjny, 15(4/167), 10–14 (in Polish).
Parkinson, B. W., and Spilker, J. J. (1996). Global positioning system: Theory and applications, American Institute of Aeronautics and Astronautics, Reston, VA.
Seeber, G. (1993). Satellite geodesy: foundations, methods and applications, Walter de Gruyter Verlag, Berlin.
Somla, J., Wajda, S., Oruba, A., Ryczywolski, M., Leonczyk, M., and Bosy, J. (2008). “ASG-EUPOS testing in progress.” Geodeta—Magazyn Geoinformacyjny, 14(2/153), 4–8 (in Polish).
Specht, C. (2007). The GPS system, Bernardinum Publishing, Pelplin, Poland (in Polish).
Teunissen, P., and Kleusberg, A. (1998). GPS for geodesy, Springer, New York.
U.S. Department of Transportation. (1999). Federal radionavigation plan, Washington, DC.
Information & Authors
Information
Published In
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Feb 2, 2011
Accepted: May 27, 2011
Published online: May 30, 2011
Published in print: Jan 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.