Effects of Using Accurate Climatic Conditions for Mechanistic-Empirical Pavement Design
Publication: Journal of Transportation Engineering
Volume 137, Issue 1
Abstract
The implementation of the new mechanistic-empirical design guide has led to the need for more accurate inputs. One of the most important inputs that affect the performance of the pavement materials is the climatic data. The importance of accurate climatic data is investigated in this case study. Climatic files available with the design guide and ones developed based on historical information for counties in the state of Iowa through the Iowa Environmental Mesonet were used. The climatic files that were interpolated from the data available within the design guide predicted higher rutting (both total and asphalt cement layer) for the northern part of the state, lower thermal cracking, and lower international roughness index compared to the files developed in this study. Statistical analysis showed that the results calculated using both groups are different.
Get full access to this article
View all available purchase options and get full access to this article.
References
Dempsey, B. J., Herlache, W. A., and Patel, A. J. (1986). “The climatic-materials-structural pavement analysis program user's manual,” Report Fhwa/RD-82/126, Federal Highway Administration, Washington, DC.
Huang, Y. H. (2004). Pavement analysis and design, 2nd Ed., Pearson Prentice Hall, Upper Saddle River, N.J.
Mohseni, A., Carpenter, S., and D’Angelo, J. (2005). “Development of SUPERPAVE high-temperature performance grade based on rutting damage.” Proc., Association of Asphalt Paving Technologists, Vol. 74, AAPT, Minn.
National Cooperative Highway Research Program (NCHRP). (2004). “Guide for mechanistic-empirical design of new and rehabilitated pavement structures.” NCHRP 1-37A, Washington, DC.
Ovik, J. M., Birgisson, B., and Newcomb, D. E. (2000). “Characterizing seasonal variations in pavement material properties for use in a mechanistic-empirical design procedure.” MNRoad Final Rep. No. MN/RC-2000-35, Minnesota Department of Transportation, St. Paul, Minn.
Pufahl, D. E., Lytton, R. L., and Liang, H. S. (1990). “Integrated computer model to estimate moisture and temperature effects beneath pavements.” Transp. Res. Rec., 1286, 259–269.
Solaimanian, M., and Bolzan, P. (1993). “Analysis of the integrated model of climatic effects on pavements.” Strategic Highway Research Program Rep. No. SHRP-A-637, Staratigic Highway Research Program (SHRP), Washington D.C.
Thompson, M. R., Dempsey, B. J., Hill, H., and Vogel, J. (1987). “Characterizing temperature effects for pavement analysis and design.” Transp. Res. Rec., 1121, 14–22.
Zapata, C. E., and Houston, W. N., (2008). “Calibration and validation of the enhanced integrated climatic model for pavement design.” National Cooperative Highway Research Program, NCHRP Rep. No. 602, American Associtation of State Highway and Transportation Officials in cooperation with the Federal Highway Administration, Washington, DC.
Information & Authors
Information
Published In
Copyright
© 2011 ASCE.
History
Received: Oct 15, 2008
Accepted: Jun 25, 2010
Published online: Jul 17, 2010
Published in print: Jan 2011
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.