Modeling Skid Resistance of Commercial Trucks on Highways
Publication: Journal of Transportation Engineering
Volume 136, Issue 6
Abstract
One aspect of commercial truck safety on highways is the risk of skidding. Skidding accidents involving commercial trucks risk injury or death not only to their own occupants but also to other motorists and road users. Past research on truck skidding has been largely limited to empirical accident data analyses or experiments. Few analytical or numerical studies on the mechanisms of truck skidding on highways have been performed. This paper describes the development of a numerical simulation model that can evaluate the skid resistance available to commercial trucks on wet pavements. The model is developed using fundamental structural mechanics and fluid dynamics theories with the consideration of tire-pavement contact and tire-fluid interaction. A validation of the model was performed against experimental data found in the literature. A parametric analysis is presented in this paper to evaluate the effects of the following factors on truck skid resistance: truck speed, magnitude of wheel load, thickness of a water film on a pavement surface, and tire inflation pressure. The practical significance of the simulation model is illustrated with an analysis on the different skid resistance characteristics of trucks when unloaded and fully loaded, respectively.
Get full access to this article
View all available purchase options and get full access to this article.
References
ADINA R&D Inc. (2005). ADINA theory and modeling guide volume I: ADINA solids and structures, ADINA R&D, Watertown, Mass.
Blower, D. (1999). “The relative contribution of truck drivers and passenger-vehicle drivers to truck/passenger-vehicle traffic crashes.” UMTRI Res. Rev., 30(2), 1–15.
Browne, A. L. (1971). “Dynamic hydroplaning of pneumatic tires.” Ph.D. thesis, Northwestern Univ., Evanston, Ill.
Chira-Chivala, T. (1986). “Problems of combination trucks on wet pavements: An accidental analysis.” Transp. Res. Rec., 1068, 70–75.
Dijks, A. (1976). “Influence of tread depth on wet skid resistance of tires.” Transp. Res. Rec., 621, 136–147.
Ervin, R. D. (1977). “Measurement of shear forces developed between tire and pavement.” Transp. Res. Rec., 621, 43–54.
Ervin, R. D., Winkler, C. B., Bernard, J. E., and Gupta, R. K. (1976). “Effects of tire properties on truck and bus handling.” Rep. No. UM-HSRI-76-11, National Traffic Highway Safety Administration, Washington, D.C.
Fancher, P. S. (1981). “Measurement of longitudinal and lateral traction properties of truck tires.” Rep. No. UM-HSRI-81-19, Highway Safety Research Institute, Univ. of Michigan, Ann Arbor, Mich.
Ford Motor Company. (2008). 2008 body application guide, Commercial Truck and Marketing Division, Ford, Dearborn, Mich.
Fwa, T. F., and Ong, G. P. (2008). “Wet-pavement hydroplaning risk and skid resistance: Analysis.” J. Transp. Eng., 134(5), 182–190.
General Motors. (2008). 2009 car and truck guide, General Motors, Detroit.
Groger, H., and Weis, M. (1996). “Calculation of the three-dimensional free surface flow around an automobile tire.” Tire Sci. Technol., 24, 39–49.
Ivey, D. L., Horne, W. B., and Tonda, R. D. (1986). “Strategies for reducing truck accidents on wet pavements.” Transp. Res. Rec., 1084, 1–8.
Lee, Y. P. K., Fwa, T. F., Liu, Y. R., and Choo, Y. S. (2005). “Prediction of skid resistance using finite element modeling.” E-Proc., 4th Asia Pacific Conf. on Transportation and Environment (CD-ROM), Xi’an, People’s Republic of China.
Mercedes Benz. (2008). “Atego series specification sheets.” ⟨http://www2.mercedes-benz.co.uk/⟩ (Dec. 14, 2008).
Okano, T., and Koishi, M. (2001). “A new computational procedure to predict transient hydroplaning of a tire.” Tire Sci. Technol., 29(1), 2–22.
Ong, G. P., and Fwa, T. F. (2007). “Wet-pavement hydroplaning risk and skid resistance: Modeling.” J. Transp. Eng., 133(10), 590–598.
Ong, G. P., and Fwa, T. F. (2008). “Modeling and analysis of truck hydroplaning on highways.” Transp. Res. Rec., 2068, 99–108.
Thurman, G. R., and Leasure, W. A. (1977). “Noise and traction characteristics of bias ply and radial ply tires for heavy duty trucks.” Rep. No. DOT-TST-78-2, DOT/MVMA, Washington, D.C.
Tire and Rim Association Inc. (1995). The 1995 yearbook, Copley, Ohio.
Williams, T. (1977). “Wet friction—Tire and road.” Braking of road vehicles, Institute of Mechanical Engineers, London, 81–92.
Zmindak, M., and Grajciar, I. (1977). “Simulation of the aquaplane problem.” Comput. Struct., 64(5–6), 1155–1164.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Dec 24, 2008
Accepted: Oct 8, 2009
Published online: Oct 9, 2009
Published in print: Jun 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.