Modeling Pavement Fragility
Publication: Journal of Transportation Engineering
Volume 136, Issue 6
Abstract
Pavement performance models are the key to efficient designs and effective management practices. Over the years, a number of researchers have developed reliability models to account for the uncertainty in pavement responses and utilization patterns. However, these efforts were mostly directed toward coupled capacity-demand limit state functions that do not take into account the discontinuities after the application of rehabilitation actions (e.g., overlays). The aim of this paper is to develop a pavement fragility modeling framework that accounts for the effects of the rehabilitation actions. The fragility, defined as the conditional probability of failure given a unit level of utilization, uncouples the reliability function into the capacity and demand functions, which are two separate areas of study in pavement engineering. Closed-form approximations of the fragility curves are developed to illustrate the process and allow for seamless integration in design and management optimization models.
Get full access to this article
View all available purchase options and get full access to this article.
References
Alsherri, A., and George, K. P. (1988). “Reliability model for pavement performance.” J. Transp. Eng., 114(3), 294–306.
Ang, A. H.-S., and Tang, W. H. (2007). Probability concepts in engineering: Emphasis on applications to civil and environmental engineering, 2nd Ed., Wiley, New York.
Bjerager, P. (1990). “On computation methods for structural reliability analysis.” Struct. Safety, 9(2), 79–96.
Chua, K. H., Der Kiureghian, A., and Monismith, C. L. (1992). “Stochastic model for pavement design.” J. Transp. Eng., 118(6), 769–786.
Darter, M. L., Khazanovich, T. Y., and Mallela, J. (2005). “Reliability analysis of cracking and faulting prediction in the new mechanistic-empirical design procedure.” Transportation Research Record. 1936, Transportation Research Board of the National Academies, Washington, D.C.
Deshpande, V. (2008). “Accounting for the effects of rehabilitation actions on the reliability of flexible pavements: Performance modeling and optimization.” MS thesis, Texas A&M Univ., College Station, Tex.
Ditlevsen, O., and Madsen, H. O. (1996). Structural reliability methods, Wiley, Chichester.
Ellingwood, B. R., Celik, O. C., and Kinali, K. (2007). “Fragility assessment of building structural systems in mid-America.” Earthquake Eng. Struct. Dynam., 36(13), 1935–1952.
Gardoni, P., Der Kiureghian, A., and Mosalam, K. M. (2002). “Probabilistic capacity models and fragility estimates for RC columns based on experimental observations.” J. Eng. Mech., 128(10), 1024–1038.
Gardoni, P., Mosalam, K. M., and Der Kiureghian, A. (2003). “Probabilistic seismic demand models and fragility estimates for RC bridges.” J. Earthquake Eng., 7(1), 79–106.
Hong, H. P., and Wang, S. S. (2003). “Stochastic modeling of pavement performance.” Int. J. Pavement Eng., 4(4), 235–243.
Huang, Y. H. (2004). Pavement analysis and design, Pearson Education, Upper Saddle River, N.J.
Lawless, J. F. (2003). “Statistical models and methods for lifetime data.” Wiley series in probability and statistics, 2nd Ed., Wiley, Hoboken, N.J.
Li, N., Haas, R., and Xie, W. (1996). “Reliability-based processing of Markov chains for modeling pavement network deterioration.” Transp. Res. Rec., 1524, 203–213.
Melchers, R. E. (1987). Structural reliability analysis and prediction, Ellis Horwood, Chichester.
Nowak, A. S., and Zhou, J. (1990). “System reliability models for bridges.” Struct. Safety, 7(2–4), 247–254.
Rada, G. R., Perl, J., and Witczak, M. W. (1986). “Integrated model for project-level management of flexible pavements.” J. Transp. Eng., 112(4), 381–399.
Ramamoorthy, K. S., Gardoni, P., and Bracci, M. J. (2006). “Probabilistic demand models and fragility curves for reinforced concrete frames.” J. Struct. Eng., 132(10), 1563–1572.
Ramamoorthy, K. S., Gardoni, P., and Bracci, M. J. (2008). “Seismic fragility and confidence bounds for gravity load designed reinforced concrete frames of varying height.” J. Struct. Eng., 134(4), 639–650.
Reigle, J. A., and Zaniewski, J. P. (2002). “Risk-based life-cycle cost analysis for project-level pavement management.” Transp. Res. Rec., 1816, 34–42.
Shinozuka, M., Feng, M. Q., Lee, J., and Naganuma, T. (2000). “Statistical analysis of fragility curves.” J. Eng. Mech., 126(12), 1224–1231.
Tsai, B., Harvey, J. T., and Monismith, C. L. (2003). “The application of Weibull theory in prediction of asphalt concrete fatigue performance prediction.” Transp. Res. Rec., 1832, 121–130.
Wang, K. C. P., Zaniewski, J., and Way, G. (1994). “Probabilistic behavior of pavements.” J. Transp. Eng., 120(3), 358–375.
Zhang, Z., and Damnjanovic, I. (2006). “Applying method of moments to model reliability of pavement infrastructure.” J. Transp. Eng., 132(5), 416–424.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Aug 4, 2008
Accepted: Sep 18, 2009
Published online: Sep 30, 2009
Published in print: Jun 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.