CalBack: Enhancing Caltrans Mechanistic-Empirical Pavement Design Process with New Back-Calculation Software
Publication: Journal of Transportation Engineering
Volume 135, Issue 7
Abstract
In 1996, California Department of Transportation (Caltrans) initiated an extensive project to develop mechanistic-empirical (ME) pavement design and analysis tools, which will help state design engineers incorporate the impact of new products and technologies, increased traffic volumes and axle loading, and variable climatic conditions. As part of the development of new ME design procedures, Caltrans is developing a suite of dedicated software. CalME is a ME design program for flexible pavements that parallels the NCHRP 1-37A (MEPDG) and is calibrated for California conditions. CalBack is a sophisticated back-calculation program that contains specific features pertinent to California and is designed to work standalone, or in concert with CalME. CalBack is a unique and important addition to the existing knowledge base in that it possesses multiple data input/output methods, several new analytical modeling methods, and numerous user performance options. This paper describes the successful development and implementation of CalBack in three ways: (1) why and how Caltrans developed CalBack; (2) how CalBack functions; and (3) representative studies that show how well the software performs. Application of CalBack in several California projects, including the case studies presented in this paper, has shown that back-calculated moduli for different layers in the flexible and rigid pavement systems agreed reasonably well with laboratory measured values. Furthermore, the importance of avoiding temperature gradients when evaluating portland cement concrete pavements with the falling weight deflectometer is also well captured by CalBack.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was undertaken with funding from the California Partnered Pavement Research Program for the California Department of Transportation (Caltrans). This funding is greatly appreciated. The opinions and conclusions expressed in this paper are those of the writers and do not necessarily represent those of Caltrans. The writers acknowledge the contribution of all members of the Caltrans TWG in the enhancement of CalBack.
References
AASHTO. (1993). Guide for design of pavement structures, Washington, D.C.
Baltzer, S., and Jansen, J. M. (1994). “Temperature correction of asphalt-moduli for FWD measurements.” Proc., 4th Int. Conf. on the Bearing Capacity of Roads and Airfields, Vol. 1, Univ. of Minnesota, Minneapolis, 753–768.
California Department of Transportation (Caltrans). (2006). Highway design manual, ⟨http://www.dot. ca. gov/hq/oppd/hdm/hdmtoc.htm#hdm⟩ (Jul. 30, 2007).
Choi, J. W., Wu, R., and Pestana, J. M. (2007). Application of constrained extended Kalman filter in layer moduli backcalculation (CD-ROM), TRB, National Research Council, Washington, D.C.
Dynatest. (2005). Evaluation of layer moduli and overlay design programme—ELMOD5, ⟨http://www.dynatest.com/software/elmod_5.htm⟩ (Aug. 1, 2007).
Fu, P. C., Harvey, J., Coetzee, N. F., and Ullidtz, P. (2005). “FWD back-calculation on Interstate Highway 80 rehabilitation sections.” Technical Memorandum TM-UCB-PRC-2005–11, Pavement Research Center, Univ. of California, Berkeley/Davis, Calif, ⟨http://www.dot.ca.gov/hq/oppd/pavement/Interim_CIP_Recycle_Report.pdf⟩ (Aug. 1, 2007).
Goldberg, D. E. (1989). Genetic algorithms in search, optimization and machine learning, Kluwer Academic, Boston.
Harichandran, R. S., Mahmood, T., Raab, A. R., and Baladi, G. Y. (1993). “Modified Newton algorithm for backcalculation of pavement layer properties.” Transportation Research Record. 1384, Transportation Research Board, Washington, D.C., 15–22.
Ioannides, A. M., Barneberg, E. J., and Lary, J. A. (1989). “Interpretation of falling weight deflectometer results using principles of dimensional analysis.” Proc., 4th Int. Conf. on Concrete Pavement Design and Rehabilitation, Purdue Univ., West Lafayette, Ind., 231–247.
Irwin, L., and Szebenyi, T. (1991). User’s guide to MODCOMP3, Version 3.2, CLRP Rep. No. 91–4. Cornell Univ., Local Roads Program, Ithaca, N.Y.
Jones, D., Wu, R. Z., and Harvey, J. T. (2006). “Reflective cracking study.” First-level Rep. on HVS Testing on Section 588RF— DGAC Overlay, Univ. of California Pavement Research Center, Institute of Transportation Studies, Univ. of California, Davis and Berkeley, Calif.
Khazanovich, L., and Wang, Q. (2007). “MnLayer: High performance layered elastic analysis program.” Transportation Research Record. 2037, Transportation Research Board, Washington, D.C., 63–75.
Kopperman, S., Tiller, G., and Tseng, M. (1986). ELSYM5, Interactive Micorcomputer Version, User’s Manual, Rep. No. FHWA-TS-87–206, FHWA, U.S. Dept. of Transportation, Washington, D.C.
Kothandram, S., and Ioannides, A. M. (2001). “DIPLODEF: A unified backcalculation system for asphalt and concrete pavements.” Transportation Research Record. 2897, Transportation Research Board, Washington, D.C., 20–29.
Mahoney, J., and Coetzee, N. (2004). Guidelines for pavement deflection testing and analyses, Version 3, A Product of the Partnered Pavement Research Center for the California Dept. of Transportation, Univ. of California Pavement Research Center, Berkeley, Calif.
National Cooperative Highway Research Program (NCHRP). (2004). “Guide for mechanistic-empirical design of new and rehabilitated pavement structures.” Rep. No. 1–37 A. Transportation Research Board, Washington, D.C.
Scullion, T., Uzan, J., and Paredes, M. (1990). “MODULUS: A microcomputer-based backcalculation system.” Transportation Research Record. 1260, Transportation Research Board, Washington, D.C., 180–191.
Sivaneswaran, N., Kramer, S. L., and Mahoney, J. P. (1991). “Advanced backcalculation using a nonlinear least squares optimization technique.” Transportation Research Record. 1293, Transportation Research Board, Washington, D.C., 93–102.
Symplectic Engineering Corporation. (2004). Leap2.0 a layer elastic analysis program, Release 2.0, Berkeley, Calif.
Uddin, W. (2001). “Development and implementation of new modulus backcalculation programs using the PEDD methodology.” Proc., 2nd Int. Symp. on Maintenance and Rehabilitation of Pavements and Technological Control (CD-ROM), Segundo Simposio Sobre Manutencao e Rehabilitacao de Pavimentos e Controle Technologico, National Center for Asphalt Technology, Auburn, Ala.
Ullidtz, P. (1998). Modelling flexible pavement response and performance, Narayana Press, Odder, Denmark.
Ullidtz, P., and Coetzee, N. F. (1995). “Analytical procedures in nondestructive testing pavement evaluation.” Transportation Research Record, 1482, Transportation Research Board, Washington, D.C., 61–66.
Ullidtz, P., Harvey, J. T., Riemer, M., and Prozzi, J. A. (1999). “Layer moduli during HVS testing: Comparing laboratory results with backcalculations from FWD and MDD deflections.” Proc., 1st Int. Conf. on Accelerated Pavement Testing, Reno, Nev., ⟨http://www.its.berkeley.edu/pavementresearch/PDF/Layer%20Moduli%20During%20HVS.pdf⟩ (Jul. 28, 2007).
Uzan, J. (1994). “Advanced backcalculation techniques.” Nondestructive testing of pavements and backcalculation of moduli, ASTM STP 1198, Vol. 2, H. L. Von Quintas, A. J. Bush, III, and G. Y. Baladi, eds., ASTM, Philadelphia, 3–37.
Van Cauwelaert, F. J., Alexander, D. R., White, T. D., and Barker, W. R. (1989). “Multilayer elastic program for backcalculating layer moduli in pavement evaluation.” Nondestructive testing of pavements and backcalculation of moduli, ASTM STP 1026, A. J. Bush, III and G. Y. Baladi, eds., ASTM, Philadelphia, 171–188.
Welch, G., and Bishop, G. (2006). An introduction to the Kalman Filter, TR 95–041, Dept. of Computer Science, Univ. of North Carolina at Chapel Hill, Chapel Hill, N.C., ⟨http://www.cs.unc.edu/∼welch/media/pdf/kalman_intro. pdf⟩ (Jul. 28, 2007).
Information & Authors
Information
Published In
Journal of Transportation Engineering
Volume 135 • Issue 7 • July 2009
Pages: 479 - 488
Copyright
© 2009 ASCE.
History
Received: Apr 3, 2008
Accepted: Nov 7, 2008
Published online: Mar 3, 2009
Published in print: Jul 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.