Analysis and Development of a Passive Mechanical Vibration Abatement Device for Traffic Monitoring Cameras
Publication: Journal of Transportation Engineering
Volume 135, Issue 5
Abstract
Departments of Transportation throughout the United States and elsewhere employ close-circuit television (CCTV) cameras for roadway monitoring as part of increasingly sophisticated traffic management systems. Cameras used for this purpose are attached to various highway structures and poles as high as , all susceptible to wind- and ground-induced vibrations which adversely affect image quality. This paper describes the engineering analysis, development, and testing of a low-cost, biaxial mechanical vibration isolator specifically aimed at horizontal high-frequency motion abatement in pole-mounted camera applications and similarly conditioned supports. The device works on the principle of force and displacement transmissibility reduction via the use of a lightly damped sprung interface with a tuned natural frequency. The isolator is inserted between the top of the structure (pole) and the seat of the camera, and operates by rejecting undesirable high-frequency modal vibrations experienced by the main support; this has the effect of diminishing high-acceleration ground inputs which are principally responsible for image distortion. While favorable to high-frequency performance, the physics of this configuration prescribe the presence of a low-frequency displacement or pan of the sprung mass (albeit found to be free of blur in experiment). This characteristic is complementary to that of electronic image stabilization technology, whose performance suffers when significant motion is present in the incoming video feed. For this reason, the proposed mechanical solution is presented as an ancillary technique to image processing in installations where high frequency or displacement conditions prevail at the camera support.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work has been made possible through a grant from the Texas Department of Transportation under Research Project No. UNSPECIFIED0-5251, Vibration Reduction and Control for Traffic Cameras. The writers gratefully acknowledge the invaluable help and support provided by TxDOT officials in the Austin, Dallas-Fort Worth, and Amarillo offices.
References
Cohu, Inc. (2002). 3950 Series iView camera/positioner system installation and operation manual, Electronics Division, San Diego.
James, M., Smith, G., Wolford, J., and Whaley, P. (1989). Vibration of mechanical and structural systems, Harper & Row, New York.
Johnson, E., Ramallo, J., Spencer, B., and Sain, M. (1998). “Intelligent base isolation systems.” Proc., 2nd World Conf. on Structural Control, Kyoto, Japan.
Kinugasa, T., Yamamoto, N., Komatsu, H., Takase, S., and Imaide, T. (1990). “Electronic image stabilizer for video camera use.” IEEE Trans. Consum. Electron., 36(3), 520–525.
Lee-Glauser, G., Ahmadi, G., and Horta, L. (1997). “Integrated passive/active vibration absorber for multi-story buildings.” J. Struct. Eng., 123(4), 499–504.
Munson, B., Young, D., and Okiishi, T. (1994). Fundamentals of fluid mechanics, Wiley, New York.
National Institute for Standards and Technology. (2007). “Information Technology Laboratory website.” United States Department of Commerce, ⟨www.itl. nist.gov/div898/winds/data/NISTTTU/wind_speed_data.txt⟩.
Schweber, R. (2000). “Image stabilization shows diversity of engineering approaches.” EDN, October.
Shiba, K., Mase, S., Yabe, Y., and Tamura, K. (1998). “Active/passive vibration control systems for tall buildings.” Smart Mater. Struct., 7, 588–598.
Thayer, D., Campbell, M., Vagners, J., and von Flotow, A. (2002). “Six-axis vibration isolation system using soft actuators and multiple sensors.” J. Spacecr. Rockets, 39(2), 206–121.
Tzes, A., and Langer, F. D. (1989). “A method for solution of the Euler-Bernoulli beam equation in flexible-link robotic systems.” Proc., IEEE Int. Conf. on Systems Engineering, 557–560.
United States Department of Commerce. (2007). “National climatic data Center website.” ⟨www.ncdc.noaa.gov/oa/climate/online/ccd/avgwind.html⟩.
United States Department of Transportation. (1991). Intermodal Surface Transportation Efficiency Act of 1991, National Transportation Library, Washington, D.C.
Winterflood, J., Barber, T., and Blair, D. (2002). “Using Euler springs for vibration isolation.” Class. Quantum Grav., 19, 1639–1645.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Mar 3, 2008
Accepted: Sep 24, 2008
Published online: May 1, 2009
Published in print: May 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.