Development and Evaluation of Temporary Traffic Control Devices for Unmanned Aerial System Operations
Publication: Journal of Surveying Engineering
Volume 146, Issue 2
Abstract
Unmanned aerial systems (UASs) are an emerging technology being used in many fields, including surveying engineering. When UASs are used for these activities, they may operate in close proximity to active traffic. UASs could be distracting to drivers and increase safety concerns in these situations. Currently, there are no temporary traffic control (TTC) signs approved by the Manual on Uniform Traffic Control Devices (MUTCD) to specifically inform drivers of roadside UASs. For this study, new UAS TTC signs were designed and a questionnaire was developed to explore perspectives on UAS specific TTC. Participants drove in a high-fidelity driving simulator, which measured speed reduction, as participants drove past various configurations of TTC elements in advance of a roadside UAS operation. The results showed that drivers do support the use of UAS specific TTC signs. Speed data from the driving simulator showed that a TTC configuration of two advanced signs caused drivers to decrease their speed by an average of more than than when no TTC was present, while also inducing this deceleration at the most gradual rate.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, and code generated or used during the study are proprietary or confidential in nature and may only be provided with restrictions (e.g., anonymized data). Specifically, drivers’ visual attention data (the number of fixations and durations) for each scenario aggregated by area of interest is available.
References
Alexander, G. J., and H. Lunenfeld. 1986. Driver expectancy in highway design and traffic operations. Washington, DC: Federal Highway Administration.
Allen, R. W., T. Rosenthal, and M. Cook. 2011. “A short history of driving simulation.” In Handbook of driving simulation for engineering, medicine, and psychology, edited by D. Fisher, M. Rizzo, J. Caird, and J. Lee, 2.1–2.11. Boca Raton, FL: CRC Press.
Austin, R. 2010. Unmanned aircraft systems: UAVs design, development and deployment. Chichester, UK: Wiley.
Barlow, Z., A. Sova, D. S. Hurwitz, and M. J. Olsen. 2019. “Unsafe driver glances at roadside unmanned aerial system operations.” ITE J. 89 (6): 38–42.
Bédard, M., G. H. Guyatt, M. J. Stones, and J. P. Hirdes. 2002. “The independent contribution of driver, crash, and vehicle characteristics to driver fatalities.” Accid. Anal. Prev. 34 (6): 717–727. https://doi.org/10.1016/S0001-4575(01)00072-0.
CFR (Code of Federal Regulations) 2016. Small unmanned aircraft systems: Title 14, Part 107. Washington, DC: CFR.
Colomina, I., and P. Molina. 2014. “Unmanned aerial systems for photogrammetry and remote sensing: A review.” ISPRS J. Photogramm. Remote Sens. 92 (Jan): 79–97. https://doi.org/10.1016/j.isprsjprs.2014.02.013.
Creswell, J. W. 2014. Research design: Qualitative, quantitative, and mixed methods approaches. Los Angeles: SAGE Publications.
Daniel, J., K. Dixon, and D. Jared. 2000. “Analysis of fatal crashes in Georgia work zones.” Transp. Res. Rec. 1715 (1): 18–23. https://doi.org/10.3141/1715-03.
FHWA (Federal Highway Administration). 2009. Manual on uniform traffic control devices (MUTCD). Washington, DC: FHWA.
Ha, T.-J., Z. A. Nemeth, and T. J. Ha. 1995. “Detailed study of accident experience in construction and maintenance zones.” Transp. Res. Rec. 1509 (Jul): 38–45.
Hall, J., and M. Lorenz. 1989. “Characteristics of construction-zone accidents.” Transp. Res. Rec. 1230: 20–27.
Heaslip, K., J. Collura, and M. Knodler. 2011. “Evaluation of work zone design features to aid older drivers.” ITE J. 81 (3): 36–40.
Lay, M. G. 2004. “Design of traffic signs.” In The human factors of transport signs, edited by C. Castro and T. Horberry, 25–48. Boca Raton, FL: CRC Press.
Li, Y., and Y. Bai. 2009. “Effectiveness of temporary traffic control measures in highway work zones.” Saf. Sci. 47 (3): 453–458. https://doi.org/10.1016/j.ssci.2008.06.006.
Mallela, J., A. Mitchell, J. Gustafson, M. Olsen, C. Parrish, D. Gillins, M. Kumpula, and G. Roe. 2017. Effective use of geospatial tools in highway construction. Washington, DC: Federal Highway Administration.
Maze, T., A. Kamyab, and S. Schrock. 2000. Evaluation of work zone speed reduction measures. Ames, IA: Center for Transportation Research and Education.
McCrum-Gardner, E. 2008. “Which is the correct statistical test to use?” Br. J. Oral Maxillofacial Surg. 46 (1): 38–41. https://doi.org/10.1016/j.bjoms.2007.09.002.
Meng, Q., J. Weng, and X. Qu. 2010. “A probabilistic quantitative risk assessment model for the long-term work zone crashes.” Accid. Anal. Prev. 42 (6): 1866–1877. https://doi.org/10.1016/j.aap.2010.05.007.
Moore, D., and D. S. Hurwitz. 2013. “Fuzzy logic for improved dilemma zone identification.” Transp. Res. Rec. 2384 (1): 25–34. https://doi.org/10.3141/2384-04.
Morgan, J. F., A. R. Duley, and P. A. Hancock. 2010. “Driver responses to differing urban work zone configurations.” Accid. Anal. Prev. 42 (3): 978–985. https://doi.org/10.1016/j.aap.2009.12.021.
Mullen, N., J. Charlton, A. Devlin, and M. Bedard. 2011. “Simulator validity: Behaviors observed on the simulator and on the road.” In Handbook of driving simulation for engineering, medicine, and psychology, edited by D. Fisher, M. Rizzo, J. Caird, and J. Lee, 13.1–13.17. Boca Raton, FL: CRC Press.
Neill, J. M., D. S. Hurwitz, and M. J. Olsen. 2016. “Alternative information signs: Evaluation of driver comprehension and visual attention.” J. Transp. Eng. 142 (1): 04015036. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000807.
Pietrucha, M. T. 1995. “Human factor issues related to work zone safety.” In Transportation builder. Washington, DC: American Road and Transportation Builders Association.
Pigman, J. G., and K. R. Agent. 1990. “Highway accidents in construction and maintenance work zones.” Transp. Res. Rec. 1270: 12–21.
Ramsey, F., and D. Schafer. 2002. The statistical sleuth. Pacific Grove, CA: Duxbury.
Ravani, B., and C. Wang. 2018. “Speeding in highway work zone: An evaluation of methods of speed control.” Accid. Anal. Prev. 113 (Apr): 202–212. https://doi.org/10.1016/j.aap.2018.01.030.
Tak, S., S. Kim, and H. Yeo. 2015. “Development of a deceleration-based surrogate safety measure for rear-end collision risk.” IEEE Trans. Intell. Transp. Syst. 16 (5): 2435–2445. https://doi.org/10.1109/TITS.2015.2409374.
Turner, J. D. 1999. “What’s a work zone.” Public Roads. 62 (6): 27–30.
Ullman, G. L., and S. D. Schrock. 2003. Improving traffic control effectiveness in complex work zones. College Station, TX: Texas Transportation Institute.
Ullman, G. L., B. R. Ullman, and M. D. Finley. 2006. “Analysis of crashes at active night work zones in Texas.” In Proc., 85th Annual Meeting on Transportation Research Board. Washington, DC: Transportation Research Board.
Wang, C., K. K. Dixon, and D. Jared. 2003. “Evaluating speed-reduction strategies for highway work zones.” Transp. Res. Rec. 1824 (1): 44–53. https://doi.org/10.3141/1824-06.
Weng, J., and Q. Meng. 2011. “Analysis of driver casualty risk for different work zone types.” Accid. Anal. Prev. 43 (5): 1811–1817. https://doi.org/10.1016/j.aap.2011.04.016.
Weng, J., J.-Z. Zhu, X. Yan, and Z. Liu. 2016. “Investigation of work zone crash casualty patterns using association rules.” Accid. Anal. Prev. 92 (Jul): 43–52. https://doi.org/10.1016/j.aap.2016.03.017.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Jun 26, 2019
Accepted: Oct 14, 2019
Published online: Feb 4, 2020
Published in print: May 1, 2020
Discussion open until: Jul 4, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.