Enhancing Civil Engineering Surveying Learning through Workshops
Publication: Journal of Surveying Engineering
Volume 143, Issue 3
Abstract
Surveying in an undergraduate civil engineering curriculum needs a substantial amount of hands-on training to obtain adequate learning outcomes. A lecture-only mode of delivery does not provide the adequate surveying skills needed by an engineering student. In 2009, workshops were introduced for the CVEN2000 Civil Engineering Drawing and Surveying unit at Curtin University, Australia, with the aim of offering students hands-on training in surveying to enhance their learning. This study analyzes data collected from 160 students in 2012 and 2013 using confidence limits, correlations, frequency percentage distribution, and principal component analysis to evaluate if the introduced workshops contributed to the enhancement of (1) the students acquiring industry-based skills and (2) the students’ overall learning of engineering surveying, which is a practical-oriented course. Additionally, qualitative analysis from Curtin’s official eVALUate and examination results were used to verify the findings of the previously mentioned contributions. The results indicate that workshops contributed to the development of the students’ overall learning skills, with the top agreement of the students being critical thinking skills (93.6%), handling problems (96.6%), and correlating theory (97.9%). Qualitative analysis of the 2013 data indicates that 70% of the students agreed that their overall learning skills were enhanced and that the workshop sessions prior to the assessed fieldwork of setting out the horizontal curves enhanced their communication and teamwork skills. Overall, 97.9% of the students were satisfied with the workshops, and 98.9% of the students said that they would recommend them as an effective learning tool to their friends. The main lesson learned from the data presented in this paper is that students were satisfied with the workshops and recognized/perceived them to contribute to the development of the learning attributes they need to acquire.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the financial support provided by the Faculty of Science and Engineering at Curtin University under the Scholarship of Teaching and Learning (Project No. SMEC-101-11). The authors also thank the anonymous reviewers for their valuable comments on the paper.
References
Adair, J. K., Reyes, M. A., Anderson-Rowland, M. R., and Kouris, D. A. (2001). “Workshops vs. tutoring: How ASU’s minority engineering program is changing the way engineering students learn.” Frontiers in Education Conf., 31st Annual, Vol 2, IEEE, Piscataway, NJ.
Anwar, A. H. M. F., Awange, J., Arora, B., Nikraz, H., and Walker, J. (2012). “Mapping workshop learning to graduate attributes for civil engineering surveying.” Proc., AAEE Conf., Australasian Association for Engineering Education, Barton, Australia.
Anwar, A. H. M. F., Awange, J. L., Hamid, N., and Forootan, E. (2013). “Learning surveying and developing fieldwork skills through workshop.” Proc., 24th Annual Conf. of the Australasian Association for Engineering Education AAEE2013, Australasian Association for Engineering Education, Barton, Australia.
Baroffio, A., Nendaz, M. R., Perrier, A., Layat, C., Vermeulen, B., and Vu, N. V. (2006). “Effect of teaching context and tutor workshop on tutorial skills.” Med. Teach., 28(4), e112–e119.
Bartle, E. K., Dook, J., and Mocerino, M. (2011). “Attitudes of tertiary students towards a group project in a science unit.” Chem. Educ. Res. Pract., 12(3), 303–311.
Bourner, T., and Flowers, S. (1997). “Teaching and learning methods in higher education: A glimpse of the future.” Reflect. Higher Educ., 9, 77–102.
Campbell, D., Dawes, L., Beck, H., Wallace, S., Boman, M., and Reidsema, C. (2009). “Graduate attribute mapping with the extended CDIO framework.” Proc., AAEE Annual Conf., Australasian Association for Engineering Education, Barton, Australia, 599–604.
Curtin University. (2016). “eVALUate.” ⟨http://evaluate.curtin.edu.au⟩ (Aug. 12, 2016).
Davis, D., O’Brien, M. A. T., Freemantle, N., Mazmanian, P., and Taylor-Vaisey A. (1999). “Impact of formal continuing medical education: Do conferences, workshops, rounds, and other traditional continuing educational activities change physical behaviour or health care outcomes?” JAMA, 282(9), 867–874.
DHSS (Department of Health and Human Services). (2002). “Administering or validating surveys: Two protocols for use in conducting Medicaid external quality review activities.” Final protocol version 1.0, No. 0938-0786, Centers for Medicare and Medicaid Services, Washington, DC.
Dori, Y. J., and Belcher, J. (2005). “How does technology-enabled active learning affect undergraduate students’ understanding of electromagnetism concepts?” J. Learn. Sci., 14(2), 243–279.
Ellis, R. A., Goodyear, P., Calvo, R. A., and Prosser, M. (2008). “Engineering students’ conceptions of and approaches to learning through discussions in face-to-face and online contexts.” Learn. Instruct., 18(3), 267–282.
Felder, R., and Brent, R. (2003). “Designing and teaching courses to satisfy the ABET Engineering criteria.” J. Eng. Educ., 92(1), 7–25.
Fernandez-Samaca, L., and Ramírez, J. M. (2010). “An approach to applying project-based learning in engineering courses.” Proc., ANDESCON IEEE, IEEE, Piscataway, NJ, 1–6.
Fullilove, R. E., and Treisman, P. U. (1990). “Education mathematics achievement among African American undergraduates at the University of California, Berkeley: An evaluation of the Mathematics Workshop Program.” J. Negro Educ., 59(3), 463–478.
Graduate Attributes Policy. (2006). “Curtin graduate attributes.” ⟨http://clt.curtin.edu.au/teaching_learning_practice/graduate_capabilities.cfm⟩ (Aug. 12, 2016).
Heeringa, S. G., West, B. T., and Berglund, P. A. (2010). Applied survey data analysis, Chapman & Hall/CRC, Boca Raton, FL.
Heiman, G. W. (2011). Basic statistics for the behavioural sciences, 6th Ed., Wadsworth Gengage Learning, Boston.
Huang, N. E., et al. (2003). “A confidence limit for the empirical mode decomposition and Hilbert spectral analysis.” Proc. R. Soc. London, Ser. A, 459(2037), 2317–2345.
Jawarneh, M., Iyadat, W., Al-Shudaifat, S., and Khasawneh, L. (2008). “Developing critical thinking skills of secondary students in Jordan utilizing Monro and Slater strategy, and McFarland strategy.” Int. J. Appl. Educ. Stud., 3(1), 82–91.
Jolliffe, I. T. (1986). Principal component analysis, Springer, New York, 487.
Laws, P. W. (1991). “Calculus-based physics without lectures.” Phys. Today, 44(12), 24–31.
Male, S. A., Bush, M. B., and Chapman, E. S. (2009). “Identification of competencies required by engineers graduating in Australia.” 20th Annual Conf. for the Australasian Association for Engineering Education, Australasian Association for Engineering Education, Barton, Australia.
Mills, J., and Barber, D. (2004). “Geomatics techniques for structural surveying.” J. Surv. Eng., 56–64.
North, G. R., Bell, T. L., Cahalan, R. F., and Moeng, F. J. (1982). “Sampling errors in the estimation of empirical orthogonal functions.” Mon. Weather Rev., 110(7), 699–706.
Pandachuck, K., Harley, D., and Cook, D. (2004). “Effectiveness of a brief workshop designed to improve teaching performance at the University of Alberta.” Acad. Med., 79(8), 798–804.
Parsell, G., Spalding, R., and Bligh, J. (1998). “Shared goals, shared learning: Evaluation of a multiprofessional course for undergraduate students.” Med. Educ., 32(3), 304–311.
Peteris A., Ansis A., and Leonids, R (2012). “Remote workshop for practical knowledge improvement in electrical engineering education: Computer control of electrical technology.” Proc., 15th Int. Conf. on Interactive Collaborative Learning (ICL), IEEE, Piscataway, NJ.
Schofield, W., and Breach, M. (2007). Engineering surveying, 6th Ed., Taylor & Francis, Boca Raton, FL, 622.
Shelton, M. T., and Hudspeth, M. C. (1989). “Cooperative learning in engineering through academic excellence workshops at California State Polytechnic Univ., Pomona.” Frontiers in Education Conf., IEEE, Piscataway, NJ, 35–39.
Skillen, J., Merten, M., Trivett, N., and Percy, A. (1998). “The IDEALL approach to learning development: A model for fostering improved literacy and learning outcomes for students.”⟨http://ro.uow.edu.au/asdpapers/145⟩ (Aug. 12, 2016).
Smith, K. A., Sheppard, R. D., Johnson, D. W., and Johnson, R. T. (2005). “Pedagogies of engagement: Classroom-based practices.” J. Eng. Educ., 94(1), 87–101.
Snyder, L., and Snyder, M. (2008). “Teaching critical thinking and problem solving skills.” Delta Pi Epsilon J., 50(2), 90–99.
Tek-Yew, L. (2012). “Exploring the relationship between the lecturer’s approaches to teaching and students’ approaches to learning.” Enhancing Learning: Teaching and Learning Conference, Curtin Univ., Sarawak, Malaysia.
Uren, J., and Price, W. F. (2010). Surveying for engineers, 5th Ed., Palgrave Macmillan Limited, Basingstoke, U.K., 806.
Vora, D., and Markoczy, L. (2012). “Group learning and performance: The role of communication and faultlines.” Int. J. Hum. Resour. Mange., 23, 2374–2392.
Walker, J., and Awange, J. (2017). Surveying for civil and mine engineers, Theory, Workshops, and Practicals, Springer, Berlin, in press.
Watson, W., Kumar, K., and Michaelsen, L. (1993). “Cultural diversity’s impact on interaction process and performance: Comparing homogeneous and diverse task groups.” Acad. Manage. J., 36(3), 590–602.
Webb, N. M. (1989). “Peer interaction and learning in small groups.” Int. J. Educ. Res., 13(1), 21–39.
Webster, J. (2000). “Engineering education in Australia.” Int. J. Eng. Educ., 16(2), 146–15.
Information & Authors
Information
Published In
Journal of Surveying Engineering
Volume 143 • Issue 3 • August 2017
Copyright
© 2017 American Society of Civil Engineers.
History
Received: Nov 23, 2015
Accepted: Aug 8, 2016
Published online: Jan 16, 2017
Discussion open until: Jun 16, 2017
Published in print: Aug 1, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.