Quality Control in Using GNSS CORS Network for Monitoring Plate Tectonics: A Western Australia Case Study
Publication: Journal of Surveying Engineering
Volume 142, Issue 2
Abstract
A comprehensive quality-control approach is presented when monitoring motion of tectonic plates using Global Navigation Satellite System (GNSS) measurements of Continuously Operating Reference Station (CORS) networks. The approach was used in a case study in which changes of coordinates with time in a dynamic datum of the newly established CORS network in Western Australia were used to determine the rate of horizontal motion of this part of the Australian Plate. Biweekly data spanning 3 years were used. Quality control started in the preprocessing stage by multipath analysis of all sites and screening of data for outliers, cycle slips, and clock jumps. Possible error sources in the observations were addressed in the processing software. The stability of CORS networks was evaluated by checking changes of their coordinates in a static datum. The computed positions were checked for their consistency, precision, and repeatability. The few problematic data were replaced by better neighboring data sets. The final positions that passed the quality-control process were used for assessment of the Australian Plate movement. Results showed that this plate had a rate of motion in a grid Universal Transverse Mercator (UTM) projection of International Terrestrial Reference Frame ITRF2008 that was 6.84 cm/year with a precision of 2 mm/year and an azimuth of 29.6° on average.
Get full access to this article
View all available purchase options and get full access to this article.
References
Altamimi, Z. (2009). “The International Terrestrial Reference Frame (ITRF).” Proc., 4th Meeting of the Int. Committee on GNSS. ⟨http://www.oosa.unvienna.org/pdf/icg/2009/icg-4/36d.pdf⟩ (Sep. 1, 2015).
Altamimi, Z., Collilieux, X., and Métivier, L. (2011). “ITRF2008: An improved solution of the International Terrestrial Reference Frame.” J. Geod., 85(8), 457–473.
AuScope. (2013). “Geospatial framework and earth dynamics.” ⟨http://auscope.org.au/site/framework.php⟩ (Sep. 1, 2015).
Bernese 5.1 [Computer software]. Astronomical Institute of the University of Bern, Bern, Switzerland ⟨http://www.bernese.unibe.ch/features/⟩.
Dawson, J., and Steed, J. (2004). “International Terrestrial Reference Frame (ITRF) to GDA94 coordinate transformations.” Geoscience Australia Rep. 3795, Version 01.03.2004. ⟨http://www.ga.gov.au/image_cache/GA3795.pdf⟩ (Sep. 1, 2015).
Dawson, J., and Woods, A. (2010). “ITRF to GDA94 coordinate transformations.” J. Appl. Geod., 4(4), 189–199.
Deo, M., and El-Mowafy, A. (2015). “Cycle slip and clock jump repair for multi-frequency multi-constellation GNSS data for precise point positioning.” Proc., IGNSS 2015, International Global Navigation Satellite Systems Society, Tweed Heads, NSW, Australia.
Dow, J., Neilan, R., and Rizos, C. (2008). “The International GNSS Service in a changing landscape of Global Navigation Satellite Systems.” J. Geod., 83(3), 191–198.
Echeverria, A., Khazaradze, G., Asensio, E., Gárate, J., Dávila, J. M., and Suriñach, E. (2013). “Crustal deformation in eastern Betics from CuaTeNeo GPS network.” Tectonophysics, 608(11), 600–612.
El-Mowafy, A. (2014). “GNSS multi-frequency receiver single-satellite measurement validation method.” GPS Solutions, 18(4), 553–561.
El-Mowafy, A. (2015a). Diagnostic tools using a multi-constellation single-receiver single-satellite data validation method. J. Navig., 68(1) 196–214.
El-Mowafy, A. (2015b). “Estimation of multi-constellation GNSS observation stochastic properties using a single-receiver single-satellite data validation method.” Surv. Rev., 47(341), 99–108.
El-Mowafy, A., and Arora, B. (2013). “The current ARAIM availability according to LPV-200 using GPS and BeiDou in Western Australia.” Proc., IGNSS Symp. 2013, International Global Navigation Satellite Systems Society, Tweed Heads, NSW, Australia.
Estey, L., and Meertens C. (1999). “TEQC: The multi-purpose toolkit for GPS/GLONASS data.” GPS Solutions, 3(1), 42–49.
GAMIT [computer software]. Dept. of Earth Atmospheric and Planetary Sciences, Massachusetts Institute of Technology, Cambridge, MA.
Guo, F., and Zhang, X. (2014). “Real-time clock jump compensation for precise point positioning.” GPS Solutions, 18(1), 41–50.
Haasdyk, J., Donnelly, N., Harrison, C., Rizos, C., Roberts, C., and Stanaway R. (2014). “Options for modernising the geocentric datum of australia.” Proc., Research@Locate’14, S. Winter and C. Rizos, eds., Australasian Spatial Information Education and Research Association, Melbourne, VIC, Australia 72–85.
Hofmann-Wellenhof, B., Lichtenegger, H., and Wasle, E. (2008). GNSS—Global Navigation Satellite Systems. Springer, New York.
ICSM (Intergovernmental Committee on Surveying and Mapping). (2014). Geocentric Datum of Australia (GDA94) technical manual, Version 2.4. ⟨http://www.icsm.gov.au/gda/gda-v_2.4.pdf⟩ (Sep. 1, 2015).
Iglewicz, B., and Hoaglin, D. C. (1993). How to detect and handle outliers. ASQC Quality Press, Milwaukee, WI.
Kogan, M. G., and Steblov, G. M. (2008). “Current global plate kinematics from GPS (1995–2007) with the plate-consistent reference frame.” J. Geophys. Res. Solid Earth, 113(B4), B04416.
Leonard, M. (2004). “GPS geodetic monitoring in regions of high intra-plate seismic activity in Australia.” Proc., 2004 NZSEE Conf., Geoscience Australia, Symonston, ACT, Australia.
Lim, M., Setan, H., and Othman, R. (2010). “GPS deformation monitoring and analysis for local CORS network: Iskandarnet.” Geoinf. Sci. J., 10(2) 1–14.
McCarthy, D. D., and Petit, G., eds. (2004) “IERS Conventions (2003).” IERS Technical Note 32, Verlag des Bundesamts für Kartographie und Geodäsie, Frankfurt am Main, Germany.
Rubinov, E., Wonnacott, R., Fuller, S., and Collier, P. (2012). “Integrity monitoring of CORS Networks-TrigNet case study.” S. Afr. J. Geomatics, 1(1) 1–13.
Soler, T. (2001). “Densifying 3D GPS networks by accurate transformation of GPS-determined vector components.” GPS Solutions, 4(3), 27–33.
Stanaway, R., and Roberts, C. (2013). “A high-precision deformation model to support geodetic datum modernisation in Australia.” Proc., IAG Scientific Assembly 2013, International Association of Geodesy, Munich, Germany, 1–7.
Tregoning, P. (2003). “Is the Australian Plate deforming? A space geodetic perspective.” Spec. Papers 372, Geological Society of America, Boulder, CO, 41–48.
Twilley, R. J., and Digney, P. W. (2001). “The Australian regional GPS network.” Phys. Chem. Earth Part A, 26(6–8), 629–635.
Uzel, T., Eren, K., Gulal, E., Tiryakioglu, I., Dindar, A. A., and Yilmaz H. (2013). “Monitoring the tectonic plate movements in Turkey based on the national continuous GNSS network.” Arabian J. Geosci., 6(9), 3573–3580.
Vaclavovic, P., and Dousa, J. (2013). “G-Nut/Anubis—Open-source tool for multi-GNSS data checking and editing.” Proc., IAG Scientific Assembly, 2013, International Association of Geodesy, Munich, Germany, 1–7.
Walter, T., and Enge, P. (1995). “Weighted RAIM for precision approach.” Proc., 8th Int. Technical Meeting of the Satellite Div. of the Institute of Navigation (ION GPS 1995), Institute of Navigation, Manassas, VA, 1995–2005.
Zhang, K., Y. Hu, G. Liu, R. Deakin, and F. Wu. (2005). “Deformation monitoring and analysis using Victorian regional CORS data.” J Global Positioning Syst., 4(1–2), 129–138.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Sep 8, 2014
Accepted: Sep 22, 2015
Published online: Jan 5, 2016
Published in print: May 1, 2016
Discussion open until: Jun 5, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.