Evolution of NAD 83 in the United States: Journey from 2D toward 4D
Publication: Journal of Surveying Engineering
Volume 138, Issue 4
Abstract
In 1986, Canada, Greenland, and the United States adopted the North American Datum of 1983 (NAD 83) to replace the North American Datum of 1927 as their official spatial reference system for geometric positioning. The rigor of the original NAD 83 realization benefited from the extensive use of electronic distance measuring instrumentation and from the use of both TRANSIT Doppler observations and very long baseline interferometry observations. However, the original NAD 83 realization predated the widespread use of the global positioning system and the use of continuously operating reference stations. Consequently, NAD 83 has evolved significantly in the United States since 1986 to embrace these technological advances, as well as to accommodate improvements in the understanding of crustal motion. This paper traces this evolution from what started as essentially a two-dimensional (2D) reference frame and has been progressing toward a four-dimensional (4D) frame. In anticipation of future geodetic advances, the U.S. National Geodetic Survey is planning to replace NAD 83 about a decade from now with a newer, more geocentric spatial reference system for geometric positioning.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This paper has benefited from contributions by Bernard Chovitz, Michael Cline, Michael Dennis, David Doyle, Jake Griffiths, Julie Prusky, Jim Ray, Jarir Saleh, Giovanni Sella, Dru Smith, and Tomás Soler. The paper also benefited from suggestions from three anonymous reviewers. Several figures were prepared with the General Mapping Tool software available at http://gmt.soest.hawaii.edu/ under the GNU General Public License.
References
Beutler, G., et al. (1994). “Extended orbit modeling technique at the CODE processing center of the international GPS service for geodynamics (IGS): Theory and initial results.” Manuscr. Geod., 19(6), 367–386.
Boehm, J., Heinkelmann, R., and Schuh, H. (2007). “Short note: A global model for pressure and temperature for geodetic applications.” J. Geodesy, 81(10), 679–683.
Boehm, J., Neill, A., Tregoning, P., and Schuh, H. (2006). “Global mapping function (GMF): A new empirical mapping function based on numerical weather model data.” Geophys. Res. Lett., 33, L07304.
Boucher, C., Altamimi, Z., and Sillard, P. (1998). “Results and analysis of the ITRF96.” IERS Technical Note 24, International Earth Rotation and Reference Systems Service Central Bureau, Paris.
Craymer, M. R. (2006). “The evolution of NAD83 in Canada.” Geomatica, 60(2), 151–164.
Craymer, M. R., Ferland, R., and Snay, R. (2000). “Realization and unification of NAD 83 in Canada and the U.S. via the ITRF.” Towards an Integrated Global Geodetic Observing System (IGGOS), IAG Section II Symp., R. Rummel, H. Drewes, W. Bosch, and H. H. Hornik, eds., Vol. 120, Springer, Berlin, 118–121.
DeMets, C., Gordon, R. G., Argus, D. F., and Stein, S. (1994). “Effect of recent revisions to the geomagnetic reversal time scale on estimates of current plate motions.” Geophys. Res. Lett., 21(20), 2191–2194.
Dewhurst, W. T. (1990). “NADCON: The application of minimum curvature-derived surfaces in the transformation of positional data from the North American Datum of 1927 to the North American Datum of 1983.” NOAA Technical Memorandum NOS NGS- 50, 〈www.geodesy.noaa.gov/PUBS_LIB/NOSNGS-50.pdf 〉 (Oct. 25, 2011).
Dracup, J. F. (1989). “History of horizontal geodetic control in the United States.” North American datum of 1983, C. R. Schwarz, C. R., eds., National Geodetic Survey, Silver Spring, MD, 〈www.geodesy.noaa.gov/PUBS_LIB/NADof1983.pdf〉 (Oct. 25, 2011).
Letellier, T. (2004). “Etude des ondes de maree sur les plateau continentaux.” Ph.D. thesis, Univ. of Toulouse III, Toulouse, France.
Milbert, D. G., and Smith, D. A. (1996). “Converting GPS height into NAVD 88 elevation with the GEOID96 geoid height model.” Proc., GIS/LIS '96 Annual Conf. and Exposition, American Congress on Surveying and Mapping, Washington, DC, 681–692, 〈www.geodesy.noaa.gov/PUBS_LIB/gislis96.html〉 (Oct. 25, 2011).
National Geodetic Survey (NGS). (2010). Proc., 2010 Federal Geospatial Summit on Improving the National Spatial Reference System, 〈www.geodesy.noaa.gov/2010Summit/2010FederalGeospatialSummitProceedings.pdf〉 (Oct. 25, 2011).
National Geospatial-Intelligence Agency (NGIA). (2004). “Addendum to NIMA TR 8350.2: Implementation of the World Geodetic System 1984 (WGS 84) Reference Frame G1150.” Addendum Rep., National Geospatial-Intelligence Agency, Springfield, VA.
National Imagery and Mapping Agency (NIMA). (2004). “Department of Defense World Geodetic System 1984: Its definition and relationship with local geodetic systems.” Technical Rep. 8350.2, NIMA, Bethesda, MD.
Pearson, C., McCaffrey, R., Elliot, J. L., and Snay, R. (2010). “HTDP 3.0: Software for coping with the coordinate changes associated with crustal motion.” J. Surv. Eng., 136(2), 80–90.
Pearson, C., and Snay, R. (2007). “Updating HTDP for two recent earthquakes in California.” Surv. Land Inf. Sci., 67(3), 149–158.
Pearson, C., and Snay, R. (2012). “Introducing HTDP 3.1 to transform coordinates across time and spatial reference frames.” GPS Solutions, 10.1007/s10291-012-0255-y (in press).
Petit, G., and Luzum, B., eds. (2011). “IERS conventions (2010).” IERS Technical Note 36, Bundesamts für Kartographie und Geodäsie, Frankfurt, Germany.
Pursell, D. G., and Potterfield, M. (2008). “NAD 83 (NSRS2007) national readjustment final report.” NOAA Technical Rep. NOS NGS 60, 〈www.geodesy.noaa.gov/PUBS_LIB/NSRS2007/NOAATRNOSNGS60.pdf〉 (Oct. 25, 2011).
Rebischung, P., Griffiths, J., Ray, J., Schmid, R., Collilieux, X., and Garayt, B. (2011). “IGS08: The IGS realization of ITRF2008.” GPS Solutions, 10.1007/s10291-011-0248-2 (in press).
Scherneck, H.-G. (1991). “A parametrized solid earth tide model and ocean tide loading effects for global geodetic baseline measurements.” Geophys. J. Int., 106(3), 677–694.
Schmid, R., Steigenberger, P., Gendt, G., Ge, M., and Rothacher, M. (2007). “Generation of a consistent absolute phase-center correction model for GPS receiver and satellite antennas.” J. Geodesy, 81(12), 781–798.
Schwarz, C. R. (1989). “North American Datum of 1983.” NOAA Professional Paper NOS 2, National Geodetic Survey, Silver Spring, MD, 〈www.geodesy.noaa.gov/PUBS_LIB/NADof1983.pdf〉 (Oct. 25, 2011).
Snay, R. A. (1999). “Using the HTDP software to transform spatial coordinates across time and between reference frames.” Surv. Land Inf. Sys., 59(1), 15–25.
Snay, R. A. (2003). “Introducing two spatial reference frames for regions of the Pacific Ocean.” Surv. Land Inf. Sci., 63(1), 5–12.
Snay, R. A., Cline, M. W., and Timmerman, E. L. (1987). “Project REDEAM: Models for historical horizontal deformation in tectonically active regions of the United States.” NOAA Technical Rep., NOS 125, NGS 42, 〈www.geodesy.noaa.gov/PUBS_LIB/Project_REDEAM_ModelsForHistoricalHorizontalDeformation_TR_NOS125_NGS42.pdf〉 (Oct. 25, 2011).
Snay, R. A., and Soler, T. (2008). “Continuously operating reference station (CORS): History, applications, and future enhancements.” J. Surv. Eng., 134(4), 95–104.
Soler, T., and Snay, R. A. (2004). “Transforming positions and velocities between the International Terrestrial Reference Frame of 2000 and the North American Datum of 1983.” J. Surv. Eng., 130(2), 49–55.
Strange, W. E., and Love, J. D. (1991). “High accuracy reference networks: A national perspective.” Proc., Am. Soc. Civil Eng. Specialty Conf. on Transportation Applications of GPS Positioning Strategy, ASCE, Sacramento, CA.
True, S. A. (2004). “Planning the future of the World Geodetic System 1984.” Proc., IEEE Position Location and Navigation Symp., IEEE, Monterey, CA.
Wang, Y. M., Saleh, J., Li, X. P., and Roman, D. (2012). “The US Gravimetric Geoid of 2009 (USGG2009): Model development and evaluation.” J. Geodesy, 86(3), 165–180.
Zilkoski, D. B., Richards, J. H., and Young, G. M. (1992). “Results of the general adjustment of the North American Vertical Datum of 1988.” Surv. Land Inf. Sys., 52(3), 133–149.
Information & Authors
Information
Published In
Journal of Surveying Engineering
Volume 138 • Issue 4 • November 2012
Pages: 161 - 171
Copyright
© 2012 American Society of Civil Engineers.
History
Received: Nov 22, 2011
Accepted: Jan 30, 2012
Published online: Feb 1, 2012
Published in print: Nov 1, 2012
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.