Increasing the Efficacy of the Conventional Deformation Analysis Methods: Alternative Strategy
Publication: Journal of Surveying Engineering
Volume 136, Issue 2
Abstract
In deformation analysis, it is important to know whether the points detected by conventional deformation analysis (CDA) are really displaced or not, and also if there are any more displaced points in the network. It is impossible to answer these questions unless the actual positions of the displaced points before the analysis are known. Moreover, the efficacy of the analysis method used must be known. The efficacy of CDA methods can be measured using the mean success rate (MSR). When a displacement occurs at a point, both the observations that belong to the displaced point and to those undisplaced points closest to it are affected. The least-squares estimation (LSE) spreads these effects to various degrees over all the coordinates. As a result, the actual displacements are not exactly reflected in the coordinates of that point. Consequently, CDA methods may wrongly identify a point as being displaced. Also the F-test is known not to be successful in some cases. Hence, the MSRs of the CDA methods are smaller than what can be expected. To eliminate the smearing effect of the LSE and the indifference of the F-test, in order to obtain more specific results a new strategy that works on absolute deformation monitoring network has been developed based on division into subnetworks.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writer B. Erdogan thanks The Scientific and Technological Research Council of Turkey for its valuable grant.
References
Baarda, W. (1973). “S transformation and criterion matrices.” Publications on Geodesy, Vol. 2, Nr. 5, Netherlands Geodetic Commission, Delft, The Netherlands.
Betti, B., Biagi, L., Crespi, M., and Riguzzi, F. (1999). “GPS sensitivity analysis applied to permanent deformation control networks.” J. Geodesy, Berlin, 73(3), 158–167.
Cai, J., Wang, J., Wu, Jicang., Hu, C., Grafarend, E., and Chen, J. (2008). “Horizontal deformation rate analysis based on multiepoch GPS measurements in Shanghai.” J. Surv. Eng., 134(4), 132–137.
Caspary, W. (1988). “A robust approach to estimating deformation parameters.” Proc. of the 5th Canadian Symp. on Mining Surveying and Rock Deformation Measurements, A. Chrzanowski and W. Wells, eds., Dept. of Surveying Engineering Univ. of New Brunswick, Fredericton, N.B., 124–135.
Caspary, W. F., Haen, W., and Borutta, H. (1990). “Deformation analysis by statistical methods.” Technometrics, 32(1), 49–57.
Chen, Y. Q. (1983). “Analysis of deformation surveys—A generalized method.” Technical Rep No. 94, Dept. of Surveying Engineering. Univ. of New Brunswick, Fredericton, N.B.
Chen, Y. Q., Kavouras, M., and Chrzanowski, A. (1987). “A strategy for detection of outlying observations in measurements of high precision.” Can, Surveyor, 41(4), 529–540.
Cooper, M. A. R. (1987). Control surveys in civil engineering, Collins, London.
Hampel, F., Ronchetti, E., Rousseeuw, P., and Stahel, W. (1986). “Robust statistics: The approach based on influence functions.” Wiley series in probability and statistics, Wiley, New York.
Heck, B. (1984). “Zur geometrischen analyse von deformationen in lagenetzen.” Allgemeine Vermessungs-Nachrichten, 91(10), 357–364.
Heck, B., Kuntz, E., and Meier-Hirmer, B. (1977). “Deformationsanalyse mittels relativer Fehlerellipsen.” Allgemeine Vermessungs-Nachrichten, 84(3), 78–87.
Hekimoglu, S., and Erdogan, B. (2006). “Reliability of conventional deformation analysis method for horizontal control networks.” Proc., 5th Turkish-German Joint Geodetic Days, L. Gründig and O. Altan, eds., Berlin Technical University, Berlin.
Hekimoglu, S., and Erenoglu, R. C. (2007). “Effect of heteroscedasticity and heterogeneousness on outlier detection for geodetic networks.” J. Geodesy, Berlin, 81(2), 137–148.
Hekimoglu, S., and Koch, K. R. (1999). “How can reliability of robust methods be measured?” Proc., 3rd Turkish-German Joint Geodetic Days, O. Altan and L. Gründig, eds., Vol. 1, Istanbul Technical University, Istanbul, Turkey, 179–196.
Koch, K. R. (1985). “Ein statistisches auswerteverfahren für deformationsmessungen.” Allgemeine Vermessungs-Nachrichten, 92(3), 97–108.
Kuang, S. (1996). Geodetic network analysis and optimal design: Concepts and applications, Ann Arbor Press, Inc., Chelsea, Mich.
Niemeier, W. (1985). “Deformations analyse.” Geodaetische Netze in Landes—und Ingenieurvermessung II, H. Pelzer, ed., Konrad Wittwer, Stuttgart, Germany, 559–623.
Pelzer, H. (1971). “Zur analyse geodätischer deformationsmessungen.” Rep. No. C-164, Deutsche Geodätische Kommission, Munich, Germany.
Pelzer, H. (1985). Geodatische netze in landes-und ingenieurvermessung II, Wittwer Verlag, Stuttgart, Germany.
Prószyñski, W. (2000). “On outlier-hiding effects in specific Gauss-Markov models:geodetic examples.” J. Geodesy, Berlin, 74(7–8), 581–589.
Rousseeuw, P., and Leroy, A. M. (1987). Robust regression and outlier detection, Wiley, New York.
Sagiya, T., Miyazaki, S., and Tada, T. (2000). “Continuous GPS array and present-day crustal deformation of Japan.” Pure Appl. Geophys., 157(11–12), 2303–2322.
Schaffrin, B. (1986). “New estimation/prediction techniques for the determination of crustal deformations in the presence of prior geophysical information.” Tectonophysics, 130(1–4), 361–367.
Schaffrin, B., and Bock, Y. (1994). “Geodetic deformation analysis based on robust inverse theory.” Manuscr. Geod., 19(1), 31–44.
Schwarz, R. C., and Kok, J. (1993). “Blunder detection and data snooping in LS and robust adjustments.” J. Surv. Eng., 119(4), 127–136.
Snow, K., and Schaffrin, B. (2007). “GPS-network analysis with BLIMPBE: An alternative to least-squares adjustment for better bias control.” J. Surv. Eng., 133(3), 114–122.
Welsch, W., Heunecke, O., and Kuhlmann, H. (2000). Auswertung geodaetischer überwachungsmessungen, Herbert Wichman Verlag, Karlsruhe, Germany.
Welsch, W. M., and Heunecke, O. (2001). Models and terminology for the analysis of geodetic monitoring observations, A. Chrzanowski, ed., FIG, Frederiksberg, Denmark, 390–412.
Information & Authors
Information
Published In
Copyright
© 2010 ASCE.
History
Received: Nov 27, 2008
Accepted: Sep 2, 2009
Published online: Sep 11, 2009
Published in print: May 2010
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.