Development of a Dataset from Shaking Table Tests of a Bridge System with Precast Reinforced Concrete Columns Equipped with Springs
Publication: Journal of Structural Engineering
Volume 148, Issue 11
Abstract
This article describes the publicly available dataset of multiple shaking table tests on a restrained rocking and sliding bridge system exhibiting negative lateral stiffness. Given the scarcity of experimental campaigns on such systems, this dataset is valuable for the development and validation of analytical and numerical models, with 184 tests. This large body of data allows the models to be validated in a statistical sense. This work describes in detail the specimen and its construction, as well as all instrumentation used during the tests. It presents the organization of the shared data, and concludes with some examples of how the available data can be postprocessed for assessing the behavior of the system.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code generated or used during the study are available in a repository or online in accordance with funder data retention policies. The data can be accessed at ETH Repository (https://doi.org/10.3929/ethz-b-000522686) or directly linked from Reggiani Manzo et al. (2022).
Acknowledgments
This work was supported by ETH Zurich under grant ETH-10 18-1. The authors also acknowledge the support of the EU-funded project, Building an Ecosystem for the Upscaling of Lightweight Multifunctional Concrete and Ceramic Materials and Structures (LightCoce, DT-NMBP-01-2018. www.lightcoce-oitb.eu), which provided access in concrete unit pilot line for the concrete production.
References
Almen, J. O., and A. Laszlo. 1936. “The uniform-section disk spring.” Trans. Am. Soc. Mech. Eng. 56 (4): 305–314.
Aslam, M., D. T. Salise, and W. G. Godden. 1980. “Earthquake rocking response of rigid bodies.” J. Struct. Div. 106 (2): 377–392. https://doi.org/10.1061/JSDEAG.0005363.
Bachmann, J. A., M. Strand, M. F. Vassiliou, M. Broccardo, and B. Stojadinović. 2018. “Is rocking motion predictable?” Earthquake Eng. Struct. Dyn. 47 (2): 535–552. https://doi.org/10.1002/eqe.2978.
CEN (European Committee for Standardization). 2004. Eurocode 2: Design of concrete structures—Part 1-1: General rules and rules for buildings. EN 1992-1-1. Brussels, Belgium: CEN.
Chopra, A. K., and F. McKenna. 2016. “Modeling viscous damping in nonlinear response history analysis of buildings for earthquake excitation.” Earthquake Eng. Struct. Dyn. 45 (2): 193–211. https://doi.org/10.1002/eqe.2622.
Cruz, C., and E. Miranda. 2017. “Evaluation of the Rayleigh damping model for buildings.” Eng. Struct. 138 (May): 324–336. https://doi.org/10.1016/j.engstruct.2017.02.001.
Davis, P. M., T. M. Janes, M. O. Eberhard, and J. F. Stanton. 2012. Unbonded pre-tensioned columns for bridges in seismic regions. Berkeley, CA: Pacific Earthquake Engineering Research Center.
DIN (Deutsche Institut füur Normung). 2017. Disc springs: Calculation. DIN EN 16984: 2017-09. Berlin: DIN.
FEMA. 2009. Quantification of building seismic performance factors. FEMA P695. Washington, DC: FEMA.
Hall, J. F. 2018. Performance of viscous damping in inelastic seismic analysis of moment-frame buildings (EERL Report, 2018-01). Pasadena, CA: California Institute of Technology.
Haraldsson, O. S., T. M. Janes, M. O. Eberhard, and J. F. Stanton. 2013. “Seismic resistance of socket connection between footing and precast column.” J. Bridge Eng. 18 (9): 910–919. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000413.
Jia, Z., J. Wen, Q. Han, X. Du, and J. Zhang. 2021. “Seismic response of a reduced-scale continuous girder bridge with rocking columns: Experiment and analysis.” Eng. Struct. 248 (Dec): 113265. https://doi.org/10.1016/j.engstruct.2021.113265.
Kurama, Y. C., S. Sritharan, R. B. Fleischman, J. I. Restrepo, R. S. Henry, N. M. Cleland, S. K. Ghosh, and P. Bonelli. 2018. “Seismic-resistant precast concrete structures: State of the art.” J. Struct. Eng. 144 (4): 03118001. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001972.
Lipscombe, P. R., and S. Pellegrino. 1993. “Free rocking of prismatic blocks.” J. Eng. Mech. 119 (7): 1387–1410. https://doi.org/10.1061/(ASCE)0733-9399(1993)119:7(1387).
Makris, N., and M. F. Vassiliou. 2015. “Dynamics of the rocking frame with vertical restrainers.” J. Struct. Eng. 141 (10): 04014245. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001231.
Mashal, M., and A. Palermo. 2019. “Low-damage seismic design for accelerated bridge construction.” J. Bridge Eng. 24 (7): 04019066. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001406.
Mouzakis, H. P., I. N. Psycharis, D. Y. Papastamatiou, P. G. Carydis, C. Papantonopoulos, and C. Zambas. 2002. “Experimental investigation of the earthquake response of a model of a marble classical column.” Earthquake Eng. Struct. Dyn. 31 (9): 1681–1698. https://doi.org/10.1002/eqe.184.
Peña, F., F. Prieto, P. B. Lourenço, A. Campos Costa, and J. V. Lemos. 2007. “On the dynamics of rocking motion of single rigid-block structures.” Earthquake Eng. Struct. Dyn. 36 (15): 2383–2399. https://doi.org/10.1002/eqe.739.
Priestley, M. J. N., S. S. Sritharan, J. R. Conley, and S. Pampanin. 1999. “Preliminary results and conclusions from the PRESSS five-story precast concrete test building.” PCI J. 44 (6): 42–67. https://doi.org/10.15554/pcij.11011999.42.67.
Priestley, M. J. N., and J. R. Tao. 1993. “Seismic response of precast prestressed concrete frames with partially debonded tendons.” PCI J. 38 (1): 58–69. https://doi.org/10.15554/pcij.01011993.58.69.
Qian, X., A. K. Chopra, and F. McKenna. 2021. “Modeling viscous damping in nonlinear response history analysis of steel moment-frame buildings: Design-plus ground motions.” Earthquake Eng. Struct. Dyn. 50 (3): 903–915. https://doi.org/10.1002/eqe.3358.
Reggiani Manzo, N., and M. F. Vassiliou. 2021a. “Cyclic tests of a precast restrained rocking system for sustainable and resilient seismic design of bridges.” Eng. Struct. 252 (Feb): 113620. https://doi.org/10.1016/j.engstruct.2021.113620.
Reggiani Manzo, N., and M. F. Vassiliou. 2021b. “Simplified analysis of bilinear elastic systems exhibiting negative stiffness behavior.” Earthquake Eng. Struct. Dyn. 50 (2): 580–600. https://doi.org/10.1002/eqe.3347.
Reggiani Manzo, N., M. F. Vassiliou, H. Mouzakis, and E. Badogiannis. 2021. “Shaking table tests of a resilient bridge system with precast reinforced concrete columns equipped with springs.” Earthquake Eng. Struct. Dyn. 51 (1): 213–239. https://doi.org/10.1002/eqe.3563.
Reggiani Manzo, N., M. F. Vassiliou, H. Mouzakis, E. Badogiannis, and L. Karapitta. 2022. “Dataset from shaking table tests of a bridge system with precast reinforced concrete columns equipped with springs.” ETH Res. Collection Platform. https://doi.org/10.3929/ethz-b-000522686.
Stanton, J., W. C. Stone, and G. S. Cheok. 1997. “A hybrid reinforced precast frame for seismic regions.” PCI J. 42 (2): 20–23. https://doi.org/10.15554/pcij.03011997.20.23.
Tazarv, M., and M. Saiid Saiidi. 2016. “Low-damage precast columns for accelerated bridge construction in high seismic zones.” J. Bridge Eng. 21 (3): 04015056. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000806.
Thonstad, T., I. M. Mantawy, J. F. Stanton, M. O. Eberhard, and D. H. Sanders. 2016. “Shaking table performance of a new bridge system with pretensioned rocking columns.” J. Bridge Eng. 21 (4): 04015079. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000867.
Truniger, R., M. F. Vassiliou, and B. Stojadinović. 2015. “An analytical model of a deformable cantilever structure rocking on a rigid surface: Experimental validation.” Earthquake Eng. Struct. Dyn. 44 (15): 2795–2815. https://doi.org/10.1002/eqe.2609.
Vassiliou, M. F. 2018. “Seismic response of a wobbling 3D frame.” Earthquake Eng. Struct. Dyn. 47 (5): 1212–1228. https://doi.org/10.1002/eqe.3013.
Vassiliou, M. F., M. Broccardo, C. Cengiz, M. Dietz, L. Dihoru, S. Gunay, K. M. Mosalam, G. Mylonakis, A. Sextos, and B. Stojadinovic. 2021a. “Shake table testing of a rocking podium: Results of a blind prediction contest.” Earthquake Eng. Struct. Dyn. 50 (4): 1043–1062. https://doi.org/10.1002/eqe.3386.
Vassiliou, M. F., C. Cengiz, M. Dietz, L. Dihoru, M. Broccardo, G. Mylonakis, A. Sextos, and B. Stojadinovic. 2021b. “Dataset from the shake table tests of a rocking podium structure.” Earthquake Spectra 37 (3): 2107–2125. https://doi.org/10.1177/8755293020988017.
Vassiliou, M. F., and N. Makris. 2015. “Dynamics of the vertically restrained rocking column.” J. Eng. Mech. 141 (12): 04015049. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000953.
Zhang, Q., and M. S. Alam. 2020. “State-of-the-art review of seismic-resistant precast bridge columns.” J. Bridge Eng. 25 (10): 03120001. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001620.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Jan 6, 2022
Accepted: Jun 17, 2022
Published online: Aug 30, 2022
Published in print: Nov 1, 2022
Discussion open until: Jan 30, 2023
ASCE Technical Topics:
- Bridge columns
- Bridge components
- Bridge engineering
- Bridge tests
- Bridges
- Bridges (by material)
- Concrete
- Concrete bridges
- Earthquake engineering
- Engineering fundamentals
- Engineering materials (by type)
- Field tests
- Geotechnical engineering
- Laboratory tests
- Materials engineering
- Precast concrete
- Reinforced concrete
- Shake table tests
- Stiffening
- Structural behavior
- Structural engineering
- Tests (by type)
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.