Japanese Efforts to Promote Steel Reuse in Building Construction
Publication: Journal of Structural Engineering
Volume 149, Issue 1
Abstract
This paper describes the state of the art of structural steel reuse in Japan. A significant part of the material is taken from a document titled the Architectural Institute of Japan (AIJ) Recommendations for Sustainable Steel Building Construction (Draft) available only in the Japanese language. The motivations for and potential benefits of steel reuse are examined. The affinity between seismic design requirements and steel reuse is highlighted through a concept known as “damage-control” design. Some technologies for disassembly are introduced. The historical development and changes in Japanese structural steel are summarized, followed by a discussion on reusability of historical steel reclaimed from existing buildings. Reuse projects whose details are known to the authors are listed. The heart of the paper is a design procedure that specifies the structural engineer’s role and involvement in planning, material procurement, and executing a steel reuse project. The discussion is concluded by six directions that should be pursued to make steel reuse a widely accepted reality in Japan. Among those directions are research needs to establish a procedure to quantify the remaining structural performance of reclaimed steel considering possible exposure to earthquakes, establish connections that allow for easy disassembly, and introduce modularized structural systems. High seismicity and the general practice to adopt full moment frames pose unique challenges for steel reuse in Japan.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This paper is a product of the Subcommittee on Environmental Issues of Steel Structures under the Managing Committee on Steel Structures, Research Committee on Structures, Architectural Institute of Japan.
References
Aburakawa, M. 2009. “Vibration control framing system with separate vibrating system.” Steel Constr. Today Tomorrow 28 (4): 3–6.
Addis, B. 2006. Building with reclaimed components and materials: A design handbook for reuse and recycling. London: Taylor & Francis Group.
AIJ (Architectural Institute of Japan). 2009. “2050: Building-related measures to counteract global warming (proposal).” Accessed January 9, 2021. https://www.aij.or.jp/scripts/request/document/20091222-1e.pdf.
AIJ (Architectural Institute of Japan). 2013a. Recommendations for design of buildings with predetermined service-life and conditions of use (design of KIGEN-TSUKI buildings). Tokyo: AIJ.
AIJ (Architectural Institute of Japan). 2013b. Recommendations for life-cycle cost assessment of buildings: Evaluation tools for global warming, resource consumption and waste production. Tokyo: AIJ.
AIJ (Architectural Institute of Japan). 2015. Recommendations for sustainable steel building construction (draft)—Member reuse. Tokyo: AIJ.
AIJ (Architectural Institute of Japan). 2021. Introduction to a new design concept for buildings with predetermined service-life and conditions of use. Tokyo: AIJ.
Aoki, H., and K. Murata. 1984. “Statistical study on yield point, tensile strength and yield ratio of structural steel.” J. Struct. Constr. Eng. 335 (4): 157–168. https://doi.org/10.3130/aijsaxx.335.0_157.
Brown, D. G., R. J. Pimentel, and R. M. Sansom. 2019. “Structural steel reuse: Assessment, testing and design principles.” Accessed August 3, 2021. https://steel-sci.com/assets/downloads/steel-reuse-event-8th-october-2019/SCI_P427.pdf.
Downey, E. W. 2010. “Reclaimed structural steel and LEED credit MR 3—Materials reuse.” Mod. Steel Constr. 50 (5): 64–66.
Dunant, C. F., M. P. Drewniok, M. Sansom, S. Corbey, J. M. Allwood, and J. M. Cullen. 2017. “Real and perceived barriers to steel reuse across the UK construction value chain.” Resour. Conserv. Recycl. 126 (3): 118–131. https://doi.org/10.1016/j.resconrec.2017.07.036.
Fujisawa, K., Y. Ichinohe, M. Sugimoto, and M. Sonoda. 2013. “Statistical study on mechanical properties and chemical compositions of SN steels.” In Proc., Summaries of Technical Papers of Annual Meeting, 51–52. Tokyo: Architectural Institute of Japan.
Fujita, M., and M. Iwata. 2008. “Reuse dismantling and performance evaluation of reusable members.” Struct. Eng. 18 (3): 230–237. https://doi.org/10.2749/101686608785096531.
Fujita, M., and S. Okazaki. 2018. “Member reuse of the building steel structure using brace on longitudinal direction—Verification of design and supervision flow.” J. Technol. Des. 58 (4): 1047–1051. https://doi.org/10.3130/aijt.24.1047.
Gorgolewski, M., V. Straka, J. Edmonds, and C. Sergio-Dzoutzidis. 2008. “Designing buildings using reclaimed steel components.” J. Green Build. 3 (3): 97–107. https://doi.org/10.3992/jgb.3.3.97.
Gritsenko, A., M. P. Nijgh, and M. Veljkovic. 2019. “Towards a demountable composite slab floor system.” ce/papers. 3 (3–4): 243–249. https://doi.org/10.1002/cepa.1052.
Hopkinson, P., H. M. Chen, K. Zhou, Y. Wang, and D. Lam. 2018. “Recovery and reuse of structural products from end-of-life buildings.” Eng. Sustainability 172 (3): 119–128. https://doi.org/10.1680/jensu.18.00007.
Hradil, P., V. Dehan, P. Kamrath, M. Kuhnhenne, J. Kesti, D. Dubina, and M. Sansom. 2020. “Provisions for greater reuse of steel structures.” Accessed August 2, 2021. https://www.steelconstruct.com/wp-content/uploads/PROGRESS-final-report-for-web.pdf.
Hradil, P., A. Talja, M. Wahlström, S. Huuhka, J. Lahdensivu, and J. Pikkuvirta. 2014. Re-use of structural elements: Environmentally efficient recovery of building components. Espoo, Finland: VTT Technical Research Centre of Finland.
IBEC (Institute for Building Environment and Energy Conservation). 2016. Comprehensive assessment system for built environment efficiency (CASBEE) evaluation manual for new building construction. Tokyo: IBEC.
IIBH (Institute of International Harmonization for Building and Housing). 2021. “Building control in Japan.” Accessed January 9, 2021. https://www.iibh.org/kijun/japan.htm.
Ishii, D., and T. Tanaka. 2008. “Evaluation of bearing strength on concrete filling in steel columns. Part 1. Study on structural behavior of connection by filling the joint with concrete for steel members.” J. Struct. Constr. Eng. 630 (5): 1385–1391. https://doi.org/10.3130/aijs.73.1385.
ISO (International Organization for Standardization). 2020. Sustainability in buildings and civil engineering works—Design for disassembly and adaptability—Principles, requirements and guidance. Geneva: ISO.
Iwamoto, H., and T. Yonezawa. 2012. “Seismic damage and restoration of Tonegawa–Higashi Viaduct of Tsukuba express rail.” Found. Eng. 40 (4): 74–77.
Iwata, M., and M. Fujita. 2011. “A damage-controlled structure using buckling-restrained knee braces.” Struct. Eng. 21 (4): 462–470. https://doi.org/10.2749/101686611X13131377725929.
Jakovljević, I., M. Spremić, and Z. Marković. 2021. “Demountable composite steel-concrete floors: A state-of-the-art review.” Građevinar 73 (3): 249–263. https://doi.org/10.14256/JCE.2932.2020.
JISF (Japan Iron and Steel Federation). 2014. 2013 Order statistics of ordinal steel by region and purposes. Tokyo: JISF.
Kishiki, S., S. Yamada, T. Takeuchi, K. Suzuki, K. Okada, and A. Wada. 2004. “New ductile steel frames limiting damage to connection elements at bottom flange of beam ends. Part 1. Static tests of beam-to-column connections with weak web split-tee.” J. Struct. Constr. Eng. 575 (4): 113–120. https://doi.org/10.3130/aijs.69.113_1.
Mansour, N., C. Christopoulos, and R. Tremblay. 2011. “Experimental validation of replaceable shear links for eccentrically braced steel frames.” J. Struct. Eng. 137 (10): 1141–1152. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000350.
METI (Ministry of Economy, Trade and Industry). 2022. “2021 energy white paper.” Accessed February 25, 2022. https://www.enecho.meti.go.jp/about/whitepaper/2021/html/index.html.
MLIT (Ministry of Land, Infrastructure, Transport and Tourism). 2021. “2019 annual report on building construction categorized by material, usage and prefecture.” Accessed August 31, 2021. https://www.mlit.go.jp/sogoseisaku/jouhouka/sosei_jouhouka_tk4_000002.html.
Pongiglione, M., and C. Calderini. 2016. “Sustainable structural design: Comprehensive literature review.” J. Struct. Eng. 142 (12): 04016139. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001621.
Pulaski, M., C. Hewitt, M. Horman, and B. Guy. 2004. “Design for deconstruction: The complete sustainable-design cycle includes provisions for the re-use of building components at the end of a structure’s design life.” In Modern steel construction. Chicago: American Institute of Steel Construction.
Shimura, Y., K. Takada, Y. Sakumoto, T. Shiaki, and K. Fujisawa. 2003. “Statistical study on mechanical properties of SN steels.” In Proc., Summaries of Technical Papers of Annual Meeting, 535–536. Tokyo: Architectural Institute of Japan.
Tingley, D. D., S. Cooper, and J. Cullen. 2017. “Understanding and overcoming the barriers to structural steel reuse, a UK perspective.” J. Cleaner Prod. 148 (1): 642–652. https://doi.org/10.1016/j.jclepro.2017.02.006.
USGBC (United States Green Building Council). 2014. “LEED reference guide for green building design and construction with global alternative compliance paths.” Accessed August 3, 2021. https://www.usgbc.org/.
Wada, A., M. Iwata, K. Shimizu, S. Abe, and H. Kawai. 1998. Damage-control design of building structures. Tokyo: Maruzen.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 149 • Issue 1 • January 2023
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Oct 31, 2021
Accepted: May 31, 2022
Published online: Nov 11, 2022
Published in print: Jan 1, 2023
Discussion open until: Apr 11, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Sayano Sanda, Yuan Liu, Zhehua Tian, Minehiro Nishiyama, Development of Novel Buckling-Restrained Steel Braces Enabled by Partial Induction Hardening, Journal of Structural Engineering, 10.1061/JSENDH.STENG-13624, 150, 10, (2024).