Experimental Investigation on Fire Behavior and Quantitative Restraint Forces of Steel–Concrete Composite Floor Systems
Publication: Journal of Structural Engineering
Volume 148, Issue 10
Abstract
A special testing apparatus was designed and employed to explore the fire behavior of a steel–concrete composite floor system with boundary restraints and to measure the variation in the restraint forces induced by fire. Two full-scale fire tests of slab specimens with different secondary support conditions were conducted. Detailed experimental results were obtained, including the furnace temperature, temperature distribution, vertical and horizontal deflection, crack patterns, and restraint forces. The furnace was shut off after 270 and 300 min when the insulation criterion for failure was met. Although the two composite floor systems were exposed to lengthy fire durations, they exhibited better fire resistance than the isolated composite slabs evaluated in previous tests in terms of aspects such as relatively limited deflection, higher deflection recovery, and excellent concrete slab integrity. The restraint moment at the slab corners was determined by the measured internal forces of steel beams in the steel frame using mechanical analysis of the relevant spatial structures. Significant warping forces were observed at the slab corners during the tests. This implied that the warping force posed a potential hazard to the adjacent columns above the composite floor system subjected to fire.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code generated or used during the study are available from the corresponding author by request.
Acknowledgments
The authors acknowledge the support of the National Natural Science Foundation of China (Grant Nos. 51778250 and 51308233) and the Natural Science Foundation of Fujian Province (Grant No. 2019J01051).
References
ACI (American Concrete Institute). 2008. Code requirements for determining the fire resistance of concrete and masonry construction assemblies. ACI 216.1M-07/TMS-216-07. Farmington Hills, MI: ACI.
ASTM. 2016. Standard test methods for fire tests of building construction and materials. ASTM E119-16. West Conshohocken, PA: ASTM.
Bailey, C. G. 2004. “Membrane action of slab/beam composite floor systems in fire.” Eng. Struct. 26 (12): 1691–1703. https://doi.org/10.1016/j.engstruct.2004.06.006.
Bailey, C. G., T. Lennon, and D. B. Moore. 1999. “The behaviour of full-scale steel-framed buildings subjected to compartment fires.” Struct. Eng. 77 (8): 15–21.
Bailey, C. G., and W. S. Toh. 2007. “Behaviour of concrete floor slabs at ambient and elevated temperatures.” Fire Saf. J. 42 (6–7): 425–436. https://doi.org/10.1016/j.firesaf.2006.11.009.
Bednář, J., F. Wald, J. Vodička, and A. Kohoutková. 2013. “Experiments on membrane action of composite floors with steel fibre reinforced concrete slab exposed to fire.” Fire Saf. J. 59 (Jul): 111–121. https://doi.org/10.1016/j.firesaf.2013.04.008.
Bolina, F. L., B. Tutikian, and J. P. C. Rodrigues. 2021a. “Experimental analysis on the structural continuity effect in steel decking concrete slabs subjected to fire.” Eng. Struct. 240 (Aug): 112299. https://doi.org/10.1016/j.engstruct.2021.112299.
Bolina, F. L., B. Tutikian, and J. P. C. Rodrigues. 2021b. “Thermal analysis of steel decking concrete slabs in case of fire.” Fire Saf. J. 121 (May): 103295. https://doi.org/10.1016/j.firesaf.2021.103295.
Burgess, I., and M. Sahin. 2018. “Tensile membrane action of lightly-reinforced rectangular composite slabs in fire.” Structure 16 (Nov): 176–197. https://doi.org/10.1016/j.istruc.2018.09.011.
Foster, S., M. Chladná, C. Hsieh, I. Burgess, and R. Plank. 2007. “Thermal and structural behaviour of a full-scale composite building subject to a severe compartment fire.” Fire Saf. J. 42 (3): 183–199. https://doi.org/10.1016/j.firesaf.2006.07.002.
Foster, S. J., C. G. Bailey, I. W. Burgess, and R. J. Plank. 2004. “Experimental behaviour of concrete floor slabs at large displacements.” Eng. Struct. 26 (9): 1231–1247. https://doi.org/10.1016/j.engstruct.2004.04.002.
General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China. 2009. Fire-resistance tests—Elements of building construction—Part 1: General requirements. GB/T 9978.1-2008. Beijing: General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China.
Guo, S. 2012. “Experimental and numerical study on restrained composite slab during heating and cooling.” J. Constr. Steel Res. 69 (1): 95–105. https://doi.org/10.1016/j.jcsr.2011.08.009.
Huang, Z., I. W. Burgess, and R. J. Plank. 2000. “Effective stiffness modelling of composite concrete slabs in fire.” Eng. Struct. 22 (9): 1133–1144. https://doi.org/10.1016/S0141-0296(99)00062-0.
Huang, Z., I. W. Burgess, and R. J. Plank. 2003a. “Modeling membrane action of concrete slabs in composite buildings in fire. I: Theoretical development.” J. Struct. Eng. 129 (8): 1093–1102. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:8(1093).
Huang, Z., I. W. Burgess, and R. J. Plank. 2003b. “Modeling membrane action of concrete slabs in composite buildings in fire. II: Validations.” J. Struct. Eng. 129 (8): 1103–1112. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:8(1103).
ISO. 2009. General administration of quality supervision, inspection and quarantine of the People’s Republic of China. ISO 834. Geneva: ISO.
Jiang, J., W. Cai, W. Chen, J. Ye, and G.-Q. Li. 2020. “An insight into Eurocode 4 design rules for thermal behaviour of composite slabs.” Fire Saf. J. 120 (Mar): 120103084. https://doi.org/10.1016/j.firesaf.2020.103084.
Jiang, J., J. A. Main, J. M. Weigand, and F. H. Sadek. 2018. “Thermal performance of composite slabs with profiled steel decking exposed to fire effects.” Fire Saf. J. 95 (Jan): 25–41. https://doi.org/10.1016/j.firesaf.2017.10.003.
Jiang, J., A. Pintar, J. M. Weigand, J. A. Main, and F. Sadek. 2019. “Improved calculation method for insulation-based fire resistance of composite slabs.” Fire Saf. J. 105 (Apr): 144–153. https://doi.org/10.1016/j.firesaf.2019.02.013.
Kordosky, A. N., M. M. Drury, and S. E. Quiel. 2020. “Structural fire resistance of partially restrained, partially composite floor beams, I: Experiments.” J. Constr. Steel Res. 167 (Apr): 105945. https://doi.org/10.1016/j.jcsr.2020.105945.
Li, G. Q., N. Zhang, and J. Jiang. 2017. “Experimental investigation on thermal and mechanical behaviour of composite floors exposed to standard fire.” Fire Saf. J. 89 (Apr): 63–76. https://doi.org/10.1016/j.firesaf.2017.02.009.
Martinez, J., and A. E. Jeffers. 2021. “Structural response of steel-concrete composite floor systems under traveling fires.” J. Constr. Steel Res. 186 (Nov): 106926. https://doi.org/10.1016/j.jcsr.2021.106926.
Ministry of Public Security of the People’s Republic of China. 2015. Code for the fire protection design of buildings. GB 50016-2014. Beijing: Ministry of Public Security of the People’s Republic of China.
MOHURD (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). 2011. Code for the design of concrete structures. GB 50010-2010. Beijing: MOHURD.
MOHURD (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). 2012. Load code for the design of building structures. GB 50009-2012. Beijing: MOHURD.
MOHURD (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). 2017. Code for the design of steel structures. GB 50017-2017. Beijing: MOHURD.
Nguyen, T. T., and K. H. Tan. 2017. “Behaviour of composite floors with different sizes of edge beams in fire.” J. Constr. Steel Res. 129 (Feb): 28–41. https://doi.org/10.1016/j.jcsr.2016.10.018.
Nguyen, T. T., K. H. Tan, and I. W. Burgess. 2015. “Behaviour of composite slab-beam systems at elevated temperatures: Experimental and numerical investigation.” Eng. Struct. 82 (Jan): 199–213. https://doi.org/10.1016/j.engstruct.2014.10.044.
Wang, B., and Y. Dong. 2010. “Experimental study of two-way reinforced concrete slabs under fire.” Tumu Gongcheng Xuebao/China Civ. Eng. J. 43 (04): 53–62. https://doi.org/10.15951/j.tmgcxb.2010.04.011.
Yang, Z. N., Y. L. Dong, and W. J. Xu. 2013. “Fire tests on two-way concrete slabs in a full-scale multi-storey steel-framed building.” Fire Saf. J. 58 (May): 38–48. https://doi.org/10.1016/j.firesaf.2013.01.023.
Zhang, D., Y. Dong, and Y. Fang. 2014. “Behaviour of full-scale two-way simply supported concrete slabs in fire.” Mag. Concr. Res. 66 (16): 836–844. https://doi.org/10.1680/macr.13.00352.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Jan 6, 2022
Accepted: Apr 8, 2022
Published online: Jul 29, 2022
Published in print: Oct 1, 2022
Discussion open until: Dec 29, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.