Cross-Section Behavior and Design of Hot-Rolled Stainless Steel Channel Sections under Major-Axis Combined Loading
Publication: Journal of Structural Engineering
Volume 148, Issue 8
Abstract
This paper reports a comprehensive experimental and numerical investigation of the cross-section behavior and capacity of hot-rolled stainless steel channel sections subjected to combined compression and major-axis bending. An experimental program was first carried out and comprised measurement of initial geometric imperfections and 10 eccentric compression tests. This was accompanied by a numerical modeling program, in which nonlinear finite-element models were first built to replicate the test observations and subsequently utilized to carry out parametric studies for producing more numerical data over a broader spectrum of loading combinations and cross-section dimensions. The data obtained from experiments and parametric studies were utilized to assess the accuracy of the relevant codified interaction curves as used in Europe and the US. The assessments showed that the codified interaction curves resulted in conservative capacity predictions due to the lack of proper consideration of the beneficial stress redistribution and material strain hardening. To overcome these shortcomings, new interaction curves were developed and resulted in greatly improved design accuracy in comparison with the codified interaction curves.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The specimens tested in the present paper were sponsored by Stainless Structurals Asia. The authors appreciate Mr. Yong Cheng Lim, Mr. Cheng Hoon Tui, David, and Mr. Subasanran Chelladurai for providing various assistances during the experiments. The financial supports from the RSA Endowment Fund (Award No. 04INS000039C120) are acknowledged.
References
ABAQUS. 2014. Abaqus 6.14. Pawtucket, RI: Hibbitt, Karlsson & Sorensen, Inc.
Afshan, S., and L. Gardner. 2013. “The continuous strength method for structural stainless steel design.” Thin-Walled Struct. 68 (Jul): 42–49. https://doi.org/10.1016/j.tws.2013.02.011.
AISC (American Institute of Steel Construction). 2021. Specification for structural stainless steel buildings. AISC 370-21. Chicago: AISC.
Arrayago, I., E. Real, and L. Gardner. 2015. “Description of stress–strain curves for stainless steel alloys.” Mater. Des. 87 (Dec): 540–552. https://doi.org/10.1016/j.matdes.2015.08.001.
Baddoo, N. R. 2008. “Stainless steel in construction: A review of research, applications, challenges and opportunities.” J. Constr. Steel Res. 64 (11): 1199–1206. https://doi.org/10.1016/j.jcsr.2008.07.011.
Becque, J., and K. J. Rasmussen. 2009. “Experimental investigation of local–overall interaction buckling of stainless steel lipped channel columns.” J. Constr. Steel Res. 65 (8–9): 1677–1684. https://doi.org/10.1016/j.jcsr.2009.04.025.
Buchanan, C., L. Gardner, and A. Liew. 2016. “The continuous strength method for the design of circular hollow sections.” J. Constr. Steel Res. 118 (Mar): 207–216. https://doi.org/10.1016/j.jcsr.2015.11.006.
CEN (European Committee for Standardization). 2014. Design of steel structures—Part 1.1: General rules for buildings. Eurocode 3, EN 1993-1-1:2005+A1:2014. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2016. Metallic materials: Tensile testing—Part 1: Method of test at room temperature. EN ISO 6892-1. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2020. Design of steel structures—Part 1.4: General Rules—Supplementary rules for stainless steels, including amendment A2. Eurocode 3, EN 1993-1-4:2006+A2:2020. Brussels, Belgium: CEN.
Chen, M. T., B. Young, A. D. Martins, D. Camotim, and P. B. Dinis. 2020. “Experimental investigation on cold-formed steel stiffened lipped channel columns undergoing local-distortional interaction.” Thin-Walled Struct. 150 (May): 106682. https://doi.org/10.1016/j.tws.2020.106682.
Chen, M. T., B. Young, A. D. Martins, D. Camotim, and P. B. Dinis. 2021. “Experimental investigation on cold-formed steel lipped channel beams affected by local-distortional interaction under non-uniform bending.” Thin-Walled Struct. 161 (Apr): 107494. https://doi.org/10.1016/j.tws.2021.107494.
Dobrić, J., J. Ivanović, and B. Rossi. 2020. “Behavior of stainless steel plain channel section columns.” Thin-Walled Struct. 148 (Mar): 106600. https://doi.org/10.1016/j.tws.2020.106600.
Fan, S., M. Chen, S. Li, Z. Ding, G. Shu, and B. Zheng. 2019. “Stainless steel lipped C-section beams: Numerical modelling and development of design rules.” J. Constr. Steel Res. 152 (Jan): 29–41. https://doi.org/10.1016/j.jcsr.2018.05.036.
Fan, S., F. Liu, B. Zheng, G. Shu, and Y. Tao. 2014. “Experimental study on bearing capacity of stainless steel lipped C section stub columns.” Thin-Walled Struct. 83 (Oct): 70–84. https://doi.org/10.1016/j.tws.2014.02.002.
Fan, S., H. Mo, Z. Ding, S. Zeng, and Q. Jiang. 2021. “Research on local buckling capacity of lipped C-section stainless steel beams under weak axis bending.” Structures 33 (Oct): 3570–3587. https://doi.org/10.1016/j.istruc.2021.06.068.
Fang, Z., K. Roy, Y. Chi, B. Chen, and J. B. Lim. 2021. “Finite element analysis and proposed design rules for cold-formed stainless steel channels with web holes under end-one-flange loading.” Structures 34 (Dec): 2876–2899. https://doi.org/10.1016/j.istruc.2021.09.017.
Gardner, L. 2019. “Stability and design of stainless steel structures–Review and outlook.” Thin-Walled Struct. 141 (Aug): 208–216. https://doi.org/10.1016/j.tws.2019.04.019.
Huang, Y., and B. Young. 2014. “Experimental investigation of cold-formed lean duplex stainless steel beam-columns.” Thin-Walled Struct. 76 (Mar): 105–117. https://doi.org/10.1016/j.tws.2013.11.006.
Kuwamura, H. 2003. “Local buckling of thin-walled stainless steel members.” Steel Struct. 3 (3): 191–201.
Li, S., L. Zhang, Y. Liang, and O. Zhao. 2021. “Experimental and numerical investigations of hot-rolled stainless steel channel section columns susceptible to flexural buckling.” Thin-Walled Struct. 164 (Jul): 107791. https://doi.org/10.1016/j.tws.2021.107791.
Li, S., L. Zhang, and O. Zhao. 2022. “Global buckling and design of hot-rolled stainless steel channel section beam-columns.” Thin-Walled Struct. 170 (Jan): 108433. https://doi.org/10.1016/j.tws.2021.108433.
Lui, W. M., M. Ashraf, and B. Young. 2014. “Tests of cold-formed duplex stainless steel SHS beam–columns.” Eng. Struct. 74 (Sep): 111–121. https://doi.org/10.1016/j.engstruct.2014.05.009.
Peiris, M., and M. Mahendran. 2021. “Behaviour of cold-formed steel lipped channel sections subject to eccentric axial compression.” J. Constr. Steel Res. 184 (Sep): 106808. https://doi.org/10.1016/j.jcsr.2021.106808.
Rossi, B., J. P. Jaspart, and K. J. Rasmussen. 2010. “Combined distortional and overall flexural-torsional buckling of cold-formed stainless steel sections: Experimental investigations.” J. Struct. Eng. 136 (4): 354–360. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000130.
Schafer, B. W., and S. Ádány. 2006. “Buckling analysis of cold-formed steel members using CUFSM: Conventional and constrained finite strip method.” In Proc., 18th Int. Specialty Conf. Cold-Formed Steel Structures, 39–54. Rolla, MO: Missouri Univ. Science and Technology.
Schafer, B. W., and T. Peköz. 1998. “Computational modelling of cold-formed steel: Characterizing geometric imperfections and residual stresses.” J. Constr. Steel Res. 47 (3): 193–210. https://doi.org/10.1016/S0143-974X(98)00007-8.
Theofanous, M., A. Liew, and L. Gardner. 2015. “Experimental study of stainless steel angles and channels in bending.” Structures 4 (Nov): 80–90. https://doi.org/10.1016/j.istruc.2015.10.004.
Zhang, L., K. H. Tan, and O. Zhao. 2020a. “Local stability of press-braked stainless steel angle and channel sections: Testing, numerical modelling and design analysis.” Eng. Struct. 203 (Jan): 109869. https://doi.org/10.1016/j.engstruct.2019.109869.
Zhang, L., K. H. Tan, and O. Zhao. 2020b. “Press-braked stainless steel channel section columns failing by flexural buckling: Testing, numerical simulation and design.” Thin-Walled Struct. 157 (Dec): 107066. https://doi.org/10.1016/j.tws.2020.107066.
Zhao, O., S. Afshan, and L. Gardner. 2017. “Structural response and continuous strength method design of slender stainless steel cross-sections.” Eng. Struct. 140 (Jun): 14–25. https://doi.org/10.1016/j.engstruct.2017.02.044.
Zhao, O., and L. Gardner. 2018. “The continuous strength method for the design of mono-symmetric and asymmetric stainless steel cross-sections in bending.” J. Constr. Steel Res. 150 (Nov): 141–152. https://doi.org/10.1016/j.jcsr.2018.08.001.
Zhao, O., B. Rossi, L. Gardner, and B. Young. 2015. “Behaviour of structural stainless steel cross-sections under combined loading—Part I: Experimental study.” Eng. Struct. 89 (Apr): 236–246. https://doi.org/10.1016/j.engstruct.2014.11.014.
Ziemian, R. D. 2010. Guide to stability design criteria for metal structures. 6th ed. New York: Wiley.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Nov 8, 2021
Accepted: Mar 28, 2022
Published online: Jun 15, 2022
Published in print: Aug 1, 2022
Discussion open until: Nov 15, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.