Nonlinear Wind and Earthquake Loads on Tall Steel-Braced Frame Buildings
Publication: Journal of Structural Engineering
Volume 148, Issue 8
Abstract
Although time-domain response analyses have been commonly used in the design of tall buildings, the code-based wind design continues to rely on prescriptive static methods. Moreover, buildings subjected to both earthquakes and wind, where both are critical, could be prone to ineffective seismic response (increasing bottom-floor member sections due to wind demand reduces the system’s ductility) and noneconomic lateral force–resisting system (design for elastic response under wind loads). The incompatibility in the current building code when addressing the seismic and wind design such as: the consideration of different return periods for wind and earthquake; design for ductility under earthquake versus the elastic response under wind; and the governing lateral load for tall steel buildings of rectangular floor plans located in moderate-to-high seismic zones, are discussed herein. First, a design methodology for developing along-wind history series, generated from wind-tunnel pressure records available from the Tokyo Polytechnic University aerodynamic database, is provided. Then, incremental dynamic analyses under winds and earthquake loads are carried out independently in a case study, and insights into the collapse mechanisms are presented. The findings show that the annual failure probability under wind is greater than that under earthquakes.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
Financial support from the Natural Sciences and Engineering Research Council of Canada (NSERC) and the Fonds de Recherche du Québec—Nature et Technologies (FRQNT) is gratefully acknowledged.
References
Alinejad, H., S. Y. Jeong, C. Chang, and T. H.-K. Kang. 2022. “Upper limit of aerodynamic forces for inelastic wind design.” J. Struct. Eng. 148 (2): 04021271. https://doi.org/10.1061/(ASCE)ST.1943-541X.0003260.
ASCE. 2017. Minimum design loads and associated criteria for buildings and other structures. ASCE/SEI 7-16. Reston, VA: ASCE.
ASCE. 2019. Prestandard for performance-based wind design. Reston, VA: ASCE.
Bernandini, E., S. M. J. Spence, D.-K. Kwon, and A. Kareem. 2015. “Performance-based design of high-rise buildings for occupant comfort.” J. Struct. Eng. 141 (10): 04014244. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001223.
Bezabeh, M. A., G. T. Bitsuamlak, and S. Tesfamariam. 2020. “Performance-based wind design of tall buildings: Concepts, frameworks, and opportunities.” Wind Struct. 31 (2): 103–142. https://doi.org/10.12989/was.2020.31.2.103.
Chuang, W.-C., and S. M. J. Spence. 2017. “A performance-based design framework for the integrated collapse and noncollapse assessment of wind excited buildings.” Eng. Struct. 150 (Nov): 746–758. https://doi.org/10.1016/j.engstruct.2017.07.030.
Ciampoli, M., F. Petrini, and G. Augusti. 2011. “Performance-based wind engineering: Towards a general procedure.” Struct. Saf. 33 (6): 367–378. https://doi.org/10.1016/j.strusafe.2011.07.001.
Cornell, C., and H. Krawinkler. 2000. Progress and challenges in seismic performance assessment. Berkeley, CA: Pacific Earthquake Engineering Research Center, Univ. of California.
CSA (Canadian Standards Association). 2014. Canadian steel design code. CSA/S16-14. Toronto: CSA.
CSI ETABS. 2016. Integrated analysis and design of building systems. Berkeley, CA: Computers & Structures.
Cui, W., and L. Caracoglia. 2015. “Simulation and analysis of intervention costs due to wind-induced damage on tall buildings.” Eng. Struct. 87 (Mar): 183–197. https://doi.org/10.1016/j.engstruct.2015.01.001.
Elezaby, F., and A. El Damatty. 2020. “Ductility-based design approach of tall buildings under wind loads.” Wind Struct. 31 (2): 143–152. https://doi.org/10.12989/was.2020.31.2.143.
FEMA. 2009. Quantification of building seismic performance factors. Washington, DC: FEMA.
FEMA. 2018. Seismic performance assessment of buildings. Volumes 1 and 7. Washington, DC: FEMA.
Hancock, J., and J. J. Bommer. 2006. “A state-of-knowledge review of the influence of strong-motion duration on structural damage.” Earthquake Spectra 22 (3): 827–845. https://doi.org/10.1193/1.2220576.
Jeong, S. Y., H. Alinejad, and T. H.-K. Kang. 2021. “Performance-based wind design of high-rise buildings using generated time-history wind loads.” J. Struct. Eng. 147 (9): 04021134. https://doi.org/10.1061/(ASCE)ST.1943-541X.0003077.
Li, Y., Q. Song, C. Li, X. Huang, and Y. Zhang. 2022. “Reduction of wind loads on rectangular tall buildings with different taper ratios.” J. Build. Eng. 45 (Jan): 103588. https://doi.org/10.1016/j.jobe.2021.103588.
Li, Y.-Q., and Y. Tamura. 2005. “Nonlinear dynamic analysis for large-span single-layer reticulated shells subjected to wind loading.” Wind Struct. 8 (1): 35–48. https://doi.org/10.12989/was.2005.8.1.035.
McCormick, J., H. Aburano, M. Ikenaga, and M. Nakashima. 2008. “Permissible residual deformation levels for building structures considering both safety and human elements.” In Proc., 14th World Conf. Earthquake Engineering. Beijing: Seismological Press of China.
Mohammadi, A., A. Azizinamini, L. Griffis, and P. Irwind. 2019. “Performance assessment of an existing 47-story high-rise building under extreme wind loads.” J. Struct. Eng. 145 (1): 04018232. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002239.
Nikellis, A., K. Sett, and A. S. Whittaker. 2019. “Multihazard design and cost-benefit analysis of buildings with special moment-resisting steel frames.” J. Struct. Eng. 145 (5): 04019031. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002298.
NRC (National Research Council of Canada). 2015a. National building code of Canada. Ottawa: Associate Committee on the National Building Code, National Research Council.
NRC (National Research Council of Canada). 2015b. Structural commentaries (user’s guide—NBC 2015). Ottawa: NRC.
Ouyang, Z., and S. M. J. Spence. 2019. “A performance-based damage estimation framework for the building envelope of wind-excited engineered structures.” J. Wind Eng. Ind. Aerodyn. 186 (Mar): 139–154. https://doi.org/10.1016/j.jweia.2019.01.001.
PEER (Pacific Earthquake Engineering Research Center). 2015. Open systems for earthquake engineering simulation (OpenSees). Berkeley, CA: PEER.
Spence, S. M. J. 2018. “Optimization of uncertain and dynamic high-rise structures for occupant comfort: An adaptive kriging approach.” Struct. Saf. 75 (Nov): 57–66. https://doi.org/10.1016/j.strusafe.2018.05.008.
Spence, S. M. J., W. Chuang, P. Tabusso, E. Bernandini, A. Kareem, L. Palizzolo, and A. Pirrotta. 2016. “Performance-based engineering of wind-excited structures: A general methodology.” In Proc., Geotechnical and Structural Engineering Congress, 1269–1282. Reston, VA: ASCE.
Spence, S. M. J., and A. Kareem. 2014. “Performance-based design and optimization of uncertain wind-excited dynamic building systems.” Eng. Struct. 78 (Nov): 133–144. https://doi.org/10.1016/j.engstruct.2014.07.026.
Suksuwan, A., and S. M. J. Spence. 2018. “Performance-based multihazard topology optimization of wind and seismically excited structural systems.” Eng. Struct. 172 (Oct): 573–588. https://doi.org/10.1016/j.engstruct.2018.06.039.
Suksuwan, A., and S. M. J. Spence. 2019. “Performance-based design optimization of uncertain wind excited systems under system-level loss constraints.” Struct. Saf. 80 (Sep): 13–31. https://doi.org/10.1016/j.strusafe.2019.03.004.
Tamura, Y., H. Yasui, and H. Marukawa. 2001. “Nonelastic responses of tall steel buildings subjected to across-wind forces.” Wind Struct. 4 (2): 147–162. https://doi.org/10.12989/was.2001.4.2.147.
Tirca, L., and L. Chen. 2014. “Numerical simulation of inelastic cyclic response of HSS braces upon fracture.” Adv. Steel Constr. 10 (4): 442–462. https://doi.org/10.18057/IJASC.2014.10.4.5.
Tirca, L., L. Chen, and R. Tremblay. 2015. “Assessing collapse safety of CBF buildings subjected to crustal and subduction earthquakes.” J. Constr. Steel Res. 115 (Dec): 47–61. https://doi.org/10.1016/j.jcsr.2015.07.025.
TPU (Tokyo Polytechnic University). 2021. “Tokyo Polytechnic aerodynamic database.” Accessed December 11, 2021. http://wind.arch.t-kougei.ac.jp/system/eng/contents/code/tpu.
Vamvatsikos, D., and C. A. Cornell. 2002. “Incremental dynamic analysis.” Earthquake Eng. Struct. Dyn. 31 (3): 491–514. https://doi.org/10.1002/eqe.141.
Van de Lindt, J. W., and T. N. Dao. 2009. “Performance-based wind engineering for wood-frame buildings.” J. Struct. Eng. 135 (2): 169–177. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:2(169).
Van der Hoven, I. 1957. “Power spectrum of horizontal wind speed in the frequency range from 0.0007 to 900 cycles per hour.” J. Atmos. Sci. 14 (2): 160–164. https://doi.org/10.1175/1520-0469(1957)014%3C0160:PSOHWS%3E2.0.CO;2.
Zaghi, A. E., J. E. Padgett, M. Bruneau, M. Barbato, Y. Li, J. Mitrani-Reiser, and A. McBride. 2016. “Establishing common nomenclature, characterizing the problem, and identifying future opportunities in multihazard design.” J. Struct. Eng. 142 (12): H2516001. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001586.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Jul 6, 2021
Accepted: Feb 17, 2022
Published online: Jun 2, 2022
Published in print: Aug 1, 2022
Discussion open until: Nov 2, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.