Shaking-Table Test on a Two-Story Timber-Framed Masonry Structure Retrofitted with Ultra-High Ductile Concrete
Publication: Journal of Structural Engineering
Volume 148, Issue 1
Abstract
Timber-framed masonry structures were widely used in eastern Asia as residential buildings. Due to a lack of seismic design, they are vulnerable to major earthquakes. To date, there are limited technologies available for strengthening this category of building with efficiency, safety, and acceptable cost. This study looked at the feasibility of using ultra-high ductile concrete, a type of engineered cementitious composite with a tensile strain capacity exceeding 8%, as a structural material for strengthening timber-framed masonry structures. The one-half-scale Chuan-dou timber-framed masonry structure was tested on a shaking table to effect serious damage; then ultra-high ductile concrete was sprayed on the masonry walls for retrofitting and further strengthening. The seismic analyses of the structure before and after retrofitting were compared, including damage patterns, dynamic properties acceleration response, and displacement response. Even under a seismic intensity of 9.0, the maximum interstory drift of the ultra-high ductile concrete retrofit structure was 0.40% and 2.00% in the longitudinal and lateral directions, respectively. Experimental results demonstrate that ultra-high ductile concrete layers significantly enhance stiffness, ductility, and damage-resistant performance. This research provides a reference for the application of ultra-high ductile concrete layers to retrofit masonry structures.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The authors gratefully acknowledge the financial support from the National Natural Science Foundation of China (No. 51778461) and the Shanghai Real Estate Science Research Institute (No. 2019-001-008), Shanghai, China. This research is also funded by the Shanghai Municipal Planning & Design Institute Co., Ltd., Shanghai, China (No. CTKY-ZDXM-2018-003).
References
Alaee, S., T. Sullivan, C. A. Rogers, and R. Nascimbene. 2012. “Semi-empirical method to predict the displacement capacity and resistance of coldformed steel frame wood-panel shear walls.” In Proc., World Conf. on Timber Engineering 2012, 450–455. Auckland, New Zealand: New Zealand Timber Design Society.
Benedetti, A., and E. Steli. 2008. “Analytical models for shear–displacement curves of unreinforced and FRP reinforced masonry panels.” Constr. Build. Mater. 22 (3): 175–185. https://doi.org/10.1016/j.conbuildmat.2006.09.005.
Carrillo, J., J. A. Pincheira, and L. E. Flores. 2020. “Quasi-static cyclic tests of confined masonry walls retrofitted with mortar overlays reinforced with either welded-wire mesh or steel fibers.” J. Build. Eng. 27 (Jan): 100975. https://doi.org/10.1016/j.jobe.2019.100975.
Cassol, D., I. Giongo, J. Ingham, and D. Dizhur. 2021. “Seismic out-of-plane retrofit of URM walls using timber strong-backs.” Constr. Build. Mater. 269 (4): 121237. https://doi.org/10.1016/j.conbuildmat.2020.121237.
Chinese Standard. 2009. Standard for test method of performance on building mortar. JGJ/T70-2009. Beijing: China Architecture & Building Press.
Chinese Standard. 2010. Code for seismic design of buildings. GB 50011-2010. Beijing: China Architecture & Building Press.
Chinese Standard. 2011a. Code for design of masonry structures. GB 50003-2011. Beijing: China Architecture & Building Press.
Chinese Standard. 2011b. Code for design of strengthening masonry structures. GB 50702-2011. Beijing: China Architecture & Building Press.
Deng, M. K., Z. F. Dong, X. S. Wang, Y. X. Zhang, and T. G. Zhou. 2019. “Shaking table tests of a half-scale 2-storey URM building retrofitted with a high ductility fibre reinforced concrete overlay system.” Eng. Struct. 197 (Oct): 109424. https://doi.org/10.1016/j.engstruct.2019.109424.
Deng, M. K., S. Yang, and X. W. Liang. 2018. “Experimental studies on seismic behavior of confined masonry walls strengthened with single HDC layer.” [In Chinese.] China Civ. Eng. J. 51 (4): 10–19. https://doi.org/10.15951/j.tmgcxb.2018.04.002.
Deng, M. K., W. Zhang, and N. Li. 2020. “In-plane cyclic loading tests of concrete hollow block masonry walls retrofitted with high ductile fiber-reinforced concrete.” Constr. Build. Mater. 238 (Mar): 117758. https://doi.org/10.1016/j.conbuildmat.2019.117758.
Dong, F. Y., J. T. Yu, K. L. Zhan, and Z. H. Li. 2020. “Seismic fragility analysis on ultra-high ductile cementitious composites frame without steel reinforcement.” Adv. Struct. Eng. 23 (11): 2373–2387. https://doi.org/10.1177/1369433219870580.
Dutu, A., H. Sakata, Y. Yamazaki, and T. Shindo. 2016. “In-plane behavior of timber frames with masonry infills under static cyclic loading.” J. Struct. Eng. 142 (2): 04015140. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001405.
Giaretton, M., D. Dizhur, and J. M. Ingham. 2016. “Shaking table testing of as-built and retrofitted clay brick URM cavity-walls.” Eng. Struct. 125 (15): 70–79. https://doi.org/10.1016/j.engstruct.2016.06.032.
Guerrini, G., N. Damiani, M. Miglietta, and F. Graziotti. 2020. “Cyclic response of masonry piers retrofitted with timber frames and boards.” Struct. Build. 174 (5): 372–388. https://doi.org/10.1680/jstbu.19.00134.
Huang, H., Y. T. Wu, Z. Li, Z. W. Sun, and Z. X. Chen. 2018. “Seismic behavior of Chuan-Dou type timber frames.” Eng. Struct. 167 (Jul): 725–739. https://doi.org/10.1016/j.engstruct.2017.10.072.
Jun, P., and V. Mechtcherine. 2010. “Behaviour of strain-hardening cement-based composites (SHCC) under monotonic and cyclic tensile loading. Part 1: Experimental investigations.” Cem. Concr. Compos. 32 (10): 801–809. https://doi.org/10.1016/j.cemconcomp.2010.07.019.
Kaheh, P. 2018. Seismic strengthening of unreinforced masonry structures using eco-friendly ductile cementitious composite repair material. Calgary, AB, Canada: Univ. of Calgary.
Kaheh, P., and N. Shrive. 2017. “Seismic strengthening of hollow concrete masonry walls using eco-friendly ductile cementitious composites (EDCC).” Proc. Eng. 210 (2017): 154–164. https://doi.org/10.1016/j.proeng.2017.11.061.
Kanda, T., Z. Lin, and V. C. Li. 2000. “Tensile stress-strain modeling of pseudo-strain hardening cementitious composites.” J. Mater. Civ. Eng. 12 (2): 147–156. https://doi.org/10.1061/(ASCE)0899-1561(2000)12:2(147).
Koutromanos, I., M. Kyriakides, A. Stavridis, S. Billington, and P. B. Shing. 2013. “Shake-table tests of a 3-story masonry-infilled RC frame retrofitted with composite materials.” J. Struct. Eng. 139 (8): 1340–1351. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000689.
Li, V. C., and M. Maalej. 1996. “Toughening in cement based composites. Part II: Fiber reinforced cementitious composites.” Cem. Concr. Compos. 18 (4): 239–249. https://doi.org/10.1016/0958-9465(95)00029-1.
Li, V. C., D. K. Mishra, and H. C. Wu. 1995. “Matrix design for pseudo-strain-hardening fibre reinforced cementitious composites.” Mater. Struct. 28 (10): 586–595. https://doi.org/10.1007/BF02473191.
Li, V. C., S. Wang, and C. Wu. 2001. “Tensile strain-hardening behavior of polyvinyl alcohol engineered cementitious composite (PVA-ECC).” ACI Mater. J. 98 (6): 483–492. https://doi.org/10.14359/10851.
Mustafaraj, E., and Y. Yardim. 2019. “Retrofitting damaged unreinforced masonry using external shear strengthening techniques.” J. Build. Eng. 26 (Nov): 100913. https://doi.org/10.1016/j.jobe.2019.100913.
Padalu, P. K. V. R., Y. Singh, and S. Das. 2020. “Cyclic two-way out-of-plane testing of unreinforced masonry walls retrofitted using composite materials.” Constr. Build. Mater. 238 (Mar): 117784. https://doi.org/10.1016/j.conbuildmat.2019.117784.
Pan, B., K. M. Qian, H. M. Xie, and A. Asundi. 2009. “Two-dimensional digital image correlation for in-plane displacement and strain measurement: A review.” Meas. Sci. Technol. 20 (6): 062001. https://doi.org/10.1088/0957-0233/20/6/062001.
Qu, Z., A. Dutu, J. R. Zhong, and J. J. Sun. 2015. “Seismic damage to masonry-infilled timber houses in the 2013 M7.” Earthquake Spectra 31 (3): 1859–1874. https://doi.org/10.1193/012914EQS023T.
Seim, W., and U. Pfeiffer. 2011. “Local post-strengthening of masonry structures with fiber-reinforced polymers (FRPs).” Constr. Build. Mater. 25 (8): 3393–3403. https://doi.org/10.1016/j.conbuildmat.2011.03.030.
Shermi, C., and R. N. Dubey. 2018a. “Study on out-of-plane behaviour of unreinforced masonry strengthened with welded wire mesh and mortar.” Constr. Build. Mater. 143 (15): 104–120. https://doi.org/10.1016/j.conbuildmat.2017.03.002.
Shermi, C., and R. N. Dubey. 2018b. “In-plane behaviour of unreinforced masonry panel strengthened with welded wire mesh and mortar.” Constr. Build. Mater. 178 (30): 195–203. https://doi.org/10.1016/j.conbuildmat.2018.04.081.
Soleimani-Dashtaki, S., C. E. Ventura, and N. Banthia. 2017. “Seismic strengthening of unreinforced masonry walls using sprayable eco-friendly ductile cementitious composite (EDCC).” Procedia Eng. 210 (2017): 154–164. https://doi.org/10.1016/j.proeng.2017.11.061.
Wang, Y. C., L. Z. Wei, J. T. Yu, and K. Q. Yu. 2019. “Mechanical properties of high ductile magnesium oxychloride cement-based composites after water soaking.” Cem. Concr. Compos. 97 (Mar): 248–258. https://doi.org/10.1016/j.cemconcomp.2018.12.028.
Website of Yongkong Life. 2020. “Being all eagerness to see it! Yongkang publishes the list of the seventh batch of cultural relics protection units.” Accessed March 3, 2020. https://www.sohu.com/a/377335852_578904.
Yu, J. T., F. Y. Dong, and J. H. Ye. 2020a. “Experimental study on the size effect of ultra-high ductile cementitious composites.” Constr. Build. Mater. 240 (Apr): 117963. https://doi.org/10.1016/j.conbuildmat.2019.117963.
Yu, J. T., F. M. Jiang, K. Q. Yu, F. Y. Dong, and X. Z. Duan. 2020b. “Deformability enhancement of fiber-reinforced cementitious composite by incorporating recycled powder.” J. Reinf. Plast. Compos. 39 (3–4): 119–131. https://doi.org/10.1177/0731684419877251.
Yu, J. T., Y. C. Wang, Z. H. Li, Q. Zhang, X. R. Jian, and Z. G. Zhang. 2019a. “Using DIC technique to characterize the mode II interface fracture of layered system composed of multiple materials.” Compos. Struct. 230 (Dec): 111413. https://doi.org/10.1016/j.compstruct.2019.111413.
Yu, J. T., J. H. Ye, B. Zhao, S. L. Xu, B. Wang, and K. Q. Yu. 2019b. “Dynamic response of concrete frames including plain ductile cementitious composites.” J. Struct. Eng. 145 (6): 04019042. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002292.
Yu, K. Q., L. Z. Li, J. T. Yu, J. Z. Xiao, J. H. Ye, and Y. C. Wang. 2018. “Feasibility of using ultra-high ductility cementitious composites for concrete structures without steel rebar.” Eng. Struct. 170 (Sep): 11–20. https://doi.org/10.1016/j.engstruct.2018.05.037.
Yu, K. Q., Y. C. Wang, J. T. Yu, and S. L. Xu. 2017. “A strain-hardening cementitious composite with the tensile capacity up to 8%.” Constr. Build. Mater. 137 (Apr): 410–419. https://doi.org/10.1016/j.conbuildmat.2017.01.060.
Zhan, K. L., J. T. Yu, Y. C. Wang, and K. Q. Yu. 2017. “Development of cementitious composites with tensile strain capacity up to 10%.” In Proc., Int. Conf. on Strain-Hardening Cement-Based Composites, 147–153. Dordrecht, Netherlands: Springer.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Oct 30, 2020
Accepted: Jun 30, 2021
Published online: Oct 19, 2021
Published in print: Jan 1, 2022
Discussion open until: Mar 19, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Guo-an Liu, Xin Wang, Zhe Yang, Lei-yu Wang, Yun-wen Zhou, Guo-bin Chen, Experimental Study on Seismic Performance of Confined Masonry Walls With Window Openings Strengthened by Using Hybrid-Fiber Modified Reactive Powder Concrete, Frontiers in Materials, 10.3389/fmats.2022.832579, 9, (2022).
- Fangming Jiang, Xiong Long, Likang Tian, Yan Tan, Jiangtao Yu, Tensile strain-hardening cementitious composites and its practical exploration without reinforcement: A review, Frontiers in Materials, 10.3389/fmats.2022.1066796, 9, (2022).
- Jie Yu, Zhifu Dong, Jiangtao Yu, Feichi Liu, Junhong Ye, Fangyuan Dong, Dynamic Response of Masonry Walls Strengthened with Engineered Cementitious Composites under Simulated Debris Flow, Journal of Structural Engineering, 10.1061/(ASCE)ST.1943-541X.0003432, 148, 9, (2022).
- Fangyuan Dong, Hanpeng Wang, Fangming Jiang, Qiong Xing, Jiangtao Yu, In-plane shear behavior of masonry panels strengthened with ultra-high ductile concrete (UHDC), Engineering Structures, 10.1016/j.engstruct.2021.113609, 252, (113609), (2022).
- Si-Qi Li, Analysis of an empirical seismic fragility prediction model of wooden roof truss buildings, Case Studies in Construction Materials, 10.1016/j.cscm.2022.e01420, 17, (e01420), (2022).
- Qiao Liao, Yuanrui Su, Jiangtao Yu, Kequan Yu, Compression-shear performance and failure criteria of seawater sea-sand engineered cementitious composites with polyethylene fibers, Construction and Building Materials, 10.1016/j.conbuildmat.2022.128386, 345, (128386), (2022).