Uniform Strip Model of Steel Plate Shear Walls with Different Plate Thicknesses
Publication: Journal of Structural Engineering
Volume 147, Issue 11
Abstract
The strip model, which is currently the most commonly used simplified analytical model for steel plate shear walls (SPSWs), neglects the compressive stiffness and resistance of the infill plate, thus underestimating the lateral stiffness and ultimate strength. Therefore, in this study, a more general simplified analytical model, the uniform strip model, is developed for SPSWs with different web plate thicknesses. The new model incorporates the compressive stiffness and resistance of the infill plate by adjusting the cross-sectional area and yield stress of the strips of the original strip model. The numerical simulations of experimental specimens demonstrate the validity of the new model. Parametric studies were performed to investigate the effects of the aspect ratio, plate thickness, and story number on the accuracy of the proposed model relative to a detailed shell element model. The results demonstrate that the uniform strip model agrees well with the shell element model. In comparison, the original strip model is most suitable only for what is classified as thin SPSWs, and the proposed model is a feasible tool for modeling buckling-restrained SPSWs.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors wish to express their gratitude and sincere appreciation for the funding provided by the National Natural Science Foundation of China (Grant Nos. 51808436 and 51708448) and the Natural Science Foundation of Shaanxi Province (CN) (Grant No. 2019JQ-754).
References
AISC. 2016. Seismic provisions for structural steel buildings. Chicago: AISC.
Behbahanifard, M. R., G. Y. Grondin, and A. E. Elwi. 2003. Experimental and numerical investigation of steel plate shear wall. Edmonton, AB: Univ. of Alberta.
Berman, J. W. 2011. “Seismic behavior of code designed steel plate shear walls.” Eng. Struct. 33 (1): 230–244. https://doi.org/10.1016/j.engstruct.2010.10.015.
Berman, J. W., and M. Bruneau. 2003. “Plastic analysis and design of steel plate shear walls.” J. Struct. Eng. 129 (11): 1448–1456. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:11(1448).
Berman, J. W., and M. Bruneau. 2008. “Capacity design of vertical boundary elements in steel plate shear walls.” Eng. J. AISC 45 (1): 57–71.
Choi, I. R., and H. G. Park. 2008. “Ductility and energy dissipation capacity of shear-dominated steel plate walls.” J. Struct. Eng. 134 (9): 1495–1507. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:9(1495).
CSA (Canadian Standards Association). 2014. Limit states design of steel structures. Toronto: CSA.
Driver, R. G., G. L. Kulak, A. E. Elwi, and D. J. L. Kennedy. 1997. Seismic behavior of steel plate shear walls. Edmonton, AB, Canada: Dept. of Civil and Environmental Engineering, Univ. of Alberta.
Driver, R. G., G. L. Kulak, A. E. Elwi, and D. J. L. Kennedy. 1998a. “Cyclic test of a four-story steel plate shear wall.” J. Struct. Eng. 142 (2): 112–120. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:2(112).
Driver, R. G., G. L. Kulak, A. E. Elwi, and D. J. L. Kennedy. 1998b. “Fe and simplified models of steel plate shear wall.” J. Struct. Eng. 124 (2): 121–130. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:2(121).
Elgaaly, M., and Y. Liu. 1997. “Analysis of thin-steel-plate shear walls.” J. Struct. Eng. 123 (11): 1487–1496. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:11(1487).
Ge, M., J. Hao, J. Yu, P. Yan, and S. Xu. 2017. “Shaking table test of buckling-restrained steel plate shear walls.” J. Constr. Steel Res. 137 (1): 254–261. https://doi.org/10.1016/j.jcsr.2017.06.021.
Jin, S., S. Yang, and J. Bai. 2019. “Numerical and experimental investigation of the full-scale buckling-restrained steel plate shear wall with inclined slots.” Thin-Walled Struct. 144 (19): 106362. https://doi.org/10.1016/j.tws.2019.106362.
Kuhn, P., J. P. Peterson, and L. R. Levin. 1952. A summary of diagonal tension: Part 1—Methods of analysis. Washington, DC: National Advisory Committee for Aeronautics.
Li, C. H., K. C. Tsai, C. H. Lin, and P. C. Chen. 2010. “Cyclic tests of four two-story narrow steel plate shear walls. Part 2: Experimental results and design implications.” Earthquake Eng. Struct. Dyn. 39 (7): 801–826.
Lubell, A. S., H. G. L. Prion, C. E. Ventura, and M. Rezai. 2000. “Unstiffened steel plate shear wall performance under cyclic loading.” J. Struct. Eng. 126 (4): 453–460. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:4(453).
Park, R. 1989. “Evaluation of ductility of structures and structural sub-assemblages from laboratory testing.” Bull. N. Z. Soc. Earthquake Eng. 22 (3): 155–166. https://doi.org/10.5459/bnzsee.22.3.155-166.
Rezai, M. 1999. “Seismic behaviour of steel plate shear walls by shake table testing.” Ph.D. dissertation, Dept. of Civil Engineering, Univ. of British Columbia.
Rezai, M., C. E. Ventura, and H. G. I. L. Prion. 2000. “Numerical investigation of thin unstiffened steel plate shear walls.” In Proc., 12th World Conf. of Earthquake Engineering, 801–808. Upper Hutt, New Zealand: New Zealand National Society for Earthquake Engineering.
Roberts, T. M., and S. Sabouri-Ghomi. 1991. “Hysteretic characteristics of unstiffened plate shear panels.” Thin-Walled Struct. 12 (2): 145–162. https://doi.org/10.1016/0263-8231(91)90061-M.
Sabouri-Ghomi, S., C. E. Ventura, and M. H. K. Kharrazi. 2005. “Shear analysis and design of ductile steel plate walls.” J. Struct. Eng. 131 (6): 878–889. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:6(878).
Shishkin, J. J., R. G. Driver, and G. Y. Grondin. 2009. “Analysis of steel plate shear walls using the modified strip model.” J. Struct. Eng. 135 (11): 1357–1366. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000066.
Thorburn, L. J., G. L. Kulak, and C. J. Montgomery. 1983. Analysis of steel plate shear walls. Edmonton, AB: Univ. of Alberta.
Tian, W., J. Hao, and C. Fan. 2016. “Analysis of thin steel plate shear walls using the three-strip mode.” J. Struct. Eng. 142 (5): 04015169. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001451.
Timler, P. A., and G. L. Kulak. 1983. Experimental study of steel plate shear walls. Edmonton, AB: Univ. of Alberta.
Timoshenko, S. P., and J. M. Gere. 1961. Theory of elastic stability. 2nd ed. New York: McGraw-Hill.
Wang, D., D. Lu, L. Huang, J. Wang, L. Xu, and J. Zhu. 2009. “Structure design of Jinta in Tianjin.” Supplement, J. Build. Struct. 30 (S1): 1–7.
Wang, Y., C. Gu, Q. Tang, Y. Shi, and W. Luo. 2019. “Experimental study on cyclic pure shear behaviour of hat-section cold-formed steel member buckling-restrained steel plate shear walls without effect of frame.” Eng. Struct. 201 (7): 109799. https://doi.org/10.1016/j.engstruct.2019.109799.
Webster, D., J. W. Berman, and L. N. Lowes. 2014. “Experimental investigation of SPSW web plate stress field development and vertical boundary element demand.” J. Struct. Eng. 140 (6): 04014011. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000989.
Yuan, C., J. Hao, C. Fan, and C. Fang. 2015. “Seismic behavior of steel frame with multi-ribbed grid composite steel plate shear wall structures.” China Civ. Eng. J. 2015 (9): 1–10.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Nov 7, 2020
Accepted: May 24, 2021
Published online: Aug 26, 2021
Published in print: Nov 1, 2021
Discussion open until: Jan 26, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Jin-Guang Yu, Shi-Qi Zhu, Xiao-Tian Feng, Seismic behavior of CFRP-steel composite plate shear wall with edge reinforcement, Journal of Constructional Steel Research, 10.1016/j.jcsr.2023.107816, 203, (107816), (2023).
- Wahab Abdul Ghafar, Tao Zhong, Muhammad Abid, Enamullah Faizan, Abdullah Mohamed, Ahmed M. Yosri, Seismic performance investigation of an innovative steel shear wall with semi-rigid beam-to-column connections, Frontiers in Materials, 10.3389/fmats.2022.1075300, 9, (2022).
- Xinghuang Wu, Jiping Hao, Weifeng Tian, Shenghui Li, Rong Wang, Cyclic tests and performance of weak-axis connected uncoupled and coupled steel plate shear wall with novel infill plate configuration, Thin-Walled Structures, 10.1016/j.tws.2022.109331, 178, (109331), (2022).
- Yipeng Du, Yongbo Shao, Yifang Cao, Performance of repaired steel plate shear wall with earthquake-induced damage, Journal of Constructional Steel Research, 10.1016/j.jcsr.2022.107149, 190, (107149), (2022).