Relaxation of Carbon and Stainless-Steel Threaded Bars for Posttensioning Applications
Publication: Journal of Structural Engineering
Volume 147, Issue 7
Abstract
An experimental program was conducted to investigate the stress relaxation properties of large-diameter bars [65 to 70 mm (2.5 to 2.75 in.) nominal] for posttensioning applications. This study was a component of a large-scale research program to develop a more corrosion-resistant, posttensioning bar. The bars were fabricated from 4142 quenched and tempered (QT) carbon steel and three stainless steel alloys: Type 450, Type 630, and Type 2507. The experimental program objective was to evaluate the stress relaxation properties of these various materials. Stress relaxation losses were determined for 24 specimens by measuring the force change in the specimens for 1,000 h under constant strain. The influence of several additional parameters on relaxation was also evaluated including initial stress level, galvanization on plain (black) steel, coupled bars, and the variability provided by different steel heats. Measured losses are compared with established relaxation theory and relaxation limits provided in standard specifications. The results indicate relaxation losses are dependent on the type of stainless steel alloy and, for the alloys tested, can vary of the relaxation of plain carbon steel bars. Furthermore, different heats of steel can result in significant variation in the amount of relaxation. While standard design approaches can be used for stainless steel bars, material-specific data are necessary to ensure appropriate posttensioning forces are applied over the life of the structure.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Acknowledgments
The authors would like to thank DYWIDAG-Systems International (DSI), Alfred Benesch & Co., and the Iowa Department of Transportation for making this research possible. The technical perspectives and conclusions reported in this paper are those of the authors and the authors alone, who are responsible for the facts and accuracy of the data presented.
References
AASHTO LRFD. 2014. Bridge design specifications. 7th ed. Washington, DC: AASHTO.
AASHTO LRFD. 2017. Bridge design specifications. 8th ed. Washington, DC: AASHTO.
ACI (American Concrete Institute). 2014. Building code requirements for structural concrete. ACI 318. Farmington Hills, MI: ACI.
Anderson, N. S., J. E. Brewe, A. O. Humphreys, and C. M. Slavin. 2017. Development of a new generation high-strength P/T anchorage bar (experimental program). Ames, IA: Iowa DOT.
ASTM. 2013a. Standard specification for hot-rolled and cold-finished age-hardening stainless steel bars and shapes. ASTM A564/A564M. West Conshohocken, PA: ASTM.
ASTM. 2013b. Standard specification for steel bars, alloy, standard grades. ASTM A322/A322M. West Conshohocken, PA: ASTM.
ASTM. 2013c. Standard test methods for stress relaxation for materials and structures. ASTM E328. West Conshohocken, PA: ASTM.
ASTM. 2017a. Standard specification for low-relaxation, seven-wire steel strand for prestressed concrete. ASTM A416/A416M. West Conshohocken, PA: ASTM.
ASTM. 2017b. Standard specification for stainless steel bars and shapes. ASTM A276/A276M. West Conshohocken, PA: ASTM.
ASTM. 2018. Standard specification for high-strength steel bars for prestressed concrete. ASTM A722/A722M. West Conshohocken, PA: ASTM.
Brewe, J. E., and N. S. Anderson. 2018. “Development of a new-generation high-strength post-tensioned anchor bar.” PTI J. 14 (2): 42–54.
BSI (British Standards Institution). 1980. Specification for hot rolled and hot rolled and processed high tensile alloy steel bars for the prestressing of concrete. BS 4486. London: BSI.
Conway, J. B., R. H. Stentz, and J. T. Berling. 1975. Fatigue, tensile, and relaxation behavior of stainless steels. Oak Ridge, TN: Div. of Reactor Research and Development, United States Atomic Energy Commission, USAEC Technical Information Center.
Dillon, C. P. 1995. Corrosion resistance of stainless steels. New York: Marcel Dekker.
Hernandez, H. D., and W. L. Gamble. 1975. Time-dependent prestress losses in pretensioned concrete construction. Urbana, IL: Univ. of Illinois at Urbana-Champaign.
ISO. 2010. Steel for the reinforcement and prestressing of concrete—Test methods—Part 3: Prestressing steel. ISO 15630-3. Geneva, Switzerland: ISO.
JSA (Japanese Standards Association). 2008. Steel bars for prestressed concrete. JIS G 3109. Tokyo: JSA.
Krapf, C. N. 2010. “Stress relaxation of post-tensioned stainless steel rods for bridge pier cap shear strengthening.” Master’s thesis, School of Civil and Environmental Engineering, Georgia Institute of Technology.
Magura, D. D., M. A. Sozen, and C. P. Siess. 1962. A study of stress relaxation in prestressing reinforcement. Urbana, IL: Univ. of Illinois at Urbana-Champaign.
Magura, D. D., M. A. Sozen, and C. P. Siess. 1964. “A study of stress relaxation in prestressing reinforcement.” PCI J. 9 (2): 13–57. https://doi.org/10.15554/pcij.04011964.13.57.
PCI (Precast/Prestressed Concrete Institute). 2017. PCI design handbook: Precast and prestressed concrete. Chicago: Industry Handbook Committee, PCI.
Schuetz, D. P. 2013. “Investigation of high strength stainless steel prestressing strands.” Master’s thesis, School of Civil and Environmental Engineering, Georgia Institute of Technology.
Zia, P., H. K. Preston, N. L. Scott, and E. B. Workman. 1979. “Estimating prestress losses.” Concr. Int. 1 (6): 32–38.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jul 24, 2019
Accepted: Feb 17, 2021
Published online: Apr 27, 2021
Published in print: Jul 1, 2021
Discussion open until: Sep 27, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.