Monitoring the Modal Properties of an RC School Building during the 2016 Central Italy Seismic Swarm
Publication: Journal of Structural Engineering
Volume 147, Issue 7
Abstract
This paper presents results from the dynamic monitoring of a reinforced concrete school building located in Camerino (central Italy) during the seismic swarm following the first main shock of the Central Italy earthquake that occurred in August 2016. After the main shock of August 24th, ambient vibration tests were executed on the building to identify its modal dynamic behavior, which was assumed as benchmark to study changes in the structural response because of the subsequent events. A three-day dynamic monitoring was then performed with the aim of investigating changes in the dynamic behavior of the building subjected to ambient and seismic excitations. A procedure to identify the nonlinear response of the structure subjected to seismic events is presented, starting from an optimization methodology that permits the identification of the structure dynamics within time windows in which the building dynamic behavior can be considered linear time-invariant. Data show the variability of the modal properties, resonance frequencies, and damping ratios of the building, with the earthquake intensity.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data or codes that support the findings of this study are available from the corresponding author upon reasonable request.
References
Arezzo, D., M. Regni, S. Carbonari, and F. Gara. 2019. “An integrated permanent dynamic monitoring system of a tall building in Central Italy.” In Proc., 8th Int. Operational Modal Analysis Conf. Gijon, Spain: International Operational Modal Analysis Conference.
Balducci, A., and M. G. Castellano. 2015. “Adeguamento sismico del liceo Varano di Camerino mediante sistema a torri dissipative.” Progettazione Sismica 6 (1): 69–91. https://doi.org/10.7414/PS.6.1.69-91.
Boroschek, R. L. 2013. “Structural health monitoring performance during the 2010 gigantic Chile earthquake.” In Earthquakes and health monitoring of civil structures, edited by M. Garevski, 197–216. Dordrecht, Netherlands: Springer.
Bowles, J. E. 1996. Foundation analysis and design. New York: McGraw-Hill.
Calvi, G. M., R. Pinho, and H. Crowley. 2006. “State-of-the-knowledge on the period elongation of RC buildings during strong ground shaking.” In Proc., ECEES First European Conf. on Earthquake Engineering and Seismology. Red Hook, NY: Curran Associates.
Capatti, M. C., G. Tropeano, M. Morici, S. Carbonari, F. Dezi, G. Leoni, and F. Silvestri. 2017. “Implications of non-synchronous excitation induced by nonlinear site amplification and soil-structure interaction on the seismic response of multi-span bridges founded on piles.” Bull. Earthquake Eng. 15 (11): 4963–4995. https://doi.org/10.1007/s10518-017-0165-z.
Cavalagli, N., G. Comanducci, and F. Ubertini. 2018. “Earthquake-induced damage detection in a monumental masonry bell-tower using long-term dynamic monitoring data.” Supplement, J. Earthquake Eng. 22 (S1): 96–119. https://doi.org/10.1080/13632469.2017.1323048.
Ceravolo, R., E. Matta, A. Quattrone, and L. Zanotti Fragonara. 2017. “Amplitude dependence of equivalent modal parameters in monitored buildings during earthquake swarms.” Earthquake Eng. Struct. Dyn. 46 (14): 2399–2417. https://doi.org/10.1002/eqe.2910.
Chiuso, A., and G. Picci. 2005. “Prediction error vs subspace methods in closed loop identification.” IFAC Proc. 38 (1): 506–511. https://doi.org/10.3182/20050703-6-CZ-1902.00085.
Circolare 21 gennaio. 2019. “n. 7. Repubblica Italiana, Consiglio Superiore dei Lavori Pubblici, Istruzioni per l’applicazione delle Nuove norme tecniche per le costruzioni di cui al decreto ministeriale 17 gennaio 2018.” [In Italian.] Gazzetta Ufficiale 5.
Clinton, J. F., S. C. Bradford, H. T. Heaton, and J. Favela. 2006. “The observed wander of the natural frequencies in a structure.” Bull. Seismol. Soc. Am. 96 (1): 237–257. https://doi.org/10.1785/0120050052.
Ditommaso, R., M. Mucciarelli, and F. C. Ponzo. 2012. “Analysis of non-stationary structural systems by using a band-variable filter.” Bull. Earthquake Eng. 10 (3): 895–911. https://doi.org/10.1007/s10518-012-9338-y.
D.M. 14.01. 2018. “Norme tecniche per le costruzioni. Ministero delle Infrastrutture e dei Trasporti.” [In Italian.] Gazzetta Ufficiale 42.
Gara, F., S. Carbonari, D. Roia, A. Balducci, and L. Dezi. 2020. “Seismic retrofit assessment of a school building through operational modal analysis and F.E. modelling.” J. Struct. Eng. 147 (1): 04020302. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002865.
García-Illescas, M. Á., D. Murià-Vila, and L. Alvarez-Icaza. 2019. “Monitoring and identification of vibration frequencies on a portion of México City metro line 12.” Adv. Civ. Eng. 2019: 4128320. https://doi.org/10.1155/2019/4128320.
Gentile, C., R. Antonello, and A. Saisi. 2019. “Continuous dynamic monitoring to enhance the knowledge of a historic bell-tower.” Int. J. Archit. Heritage 13 (7): 992–1004. https://doi.org/10.1080/15583058.2019.1605552.
Gentile, C., M. Guidobaldi, and A. Saisi. 2016. “One-year dynamic monitoring of a historic tower: Damage detection under changing environment.” Meccanica 51 (11): 2873–2889. https://doi.org/10.1007/s11012-016-0482-3.
Ghahari, S. F., F. Abazarsa, M. A. Ghannad, and E. Taciroglu. 2013. “Response-only modal identification of structures using strong motion data.” Earthquake Eng. Struct. Dyn. 42 (8): 1221–1242. https://doi.org/10.1002/eqe.2268.
Hu, R., and Y. Xu. 2019. “SHM-based seismic performance assessment of high-rise buildings under long-period ground motion.” J. Struct. Eng. 145 (6): 04019038. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002323.
INGV (National Institute of Geophysics and Volcanology). 2021. “List of seismic events.” Accessed September 1, 2019. http://cnt.rm.ingv.it/.
Kavrakov, I., K. Ahsan, and G. Morgenthal. 2020. “Comparison metrics for time-histories: Application to bridge aerodynamics.” J. Eng. Mech. 146 (9): 04020093. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001811.
Loh, C., and J. Chen. 2017. “Tracking modal parameters from building seismic response data using recursive subspace identification algorithm: Tracking modal parameters using recursive subspace identification.” Earthquake Eng. Struct. Dyn. 46 (13): 2163–2183. https://doi.org/10.1002/eqe.2900.
Lydon, F. D., and R. V. Balendran. 1986. “Some observations on elastic properties of plain concrete.” Cem. Concr. Res. 16 (3): 314–324. https://doi.org/10.1016/0008-8846(86)90106-7.
Mylonakis, G., S. Nikolaou, and G. Gazetas. 2006. “Footings under seismic loading: Analysis and design issues with emphasis on bridge foundations.” Soil Dyn. Earthquake Eng. 26 (9): 824–853. https://doi.org/10.1016/j.soildyn.2005.12.005.
O’Reilly, G. J., D. Perrone, M. Fox, R. Monteiro, A. Filiatrault, I. Lanese, and A. Pavese. 2019. “System identification and seismic assessment modeling implications for Italian school buildings.” J. Perform. Constr. Facil. 33 (1): 04018089. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001237.
Rainieri, C., D. Gargaro, and G. Fabbrocino. 2019a. “Hardware and software solutions for seismic SHM of hospitals.” In Seismic structural health monitoring, edited by M. P. Limongelli, and M. Çelebi, 279–300. Dordrecht, Netherlands: Springer.
Rainieri, C., D. Gargaro, and G. Fabbrocino. 2019c. “Hardware and Software Solutions for Seismic SHM of Hospitals.” In Seismic structural health monitoring. Springer tracts in civil engineering. Berlin: Springer. https://doi.org/10.1007/978-3-030-13976-6_12.
Rainieri, C., F. Magalhaes, D. Gargaro, G. Fabbrocino, and A. Cunha. 2019b. “Predicting the variability of natural frequencies and its causes by second-order blind identification.” Struct. Health Monit. 18 (2): 486–507. https://doi.org/10.1177/1475921718758629.
Regni, M., D. Arezzo, S. Carbonari, F. Gara, and D. Zonta. 2018. “Effect of environmental conditions on the modal response of a 10-story reinforced concrete tower.” Shock Vib. 2018: 9476146. https://doi.org/10.1155/2018/9476146.
Robles, A. E., and M. Giesbrecht. 2018. “N4SID-VAR method for multivariable discrete linear time-variant system identification.” In Pro., 15th Int. Conf. Informatics in Control, Automation and Robotics, 502–509. Porto, Portugal: Science and Technology Publications. https://doi.org/10.5220/0006907505020509.
Saisi, A., C. Gentile, and M. Guidobaldi. 2015. “Post-earthquake continuous dynamic monitoring of the Gabbia tower in Mantua, Italy.” Constr. Build. Mater. 81 (Apr): 101–112. https://doi.org/10.1016/j.conbuildmat.2015.02.010.
Skolnik, D., Y. Lei, E. Yu, and J. W. Wallace. 2006. “Identification, model updating, and response prediction of an instrumented 15-story steel-frame building.” Earthquake Spectra 22 (3): 781–802. https://doi.org/10.1193/1.2219487.
Tamariz, A. D. R., C. P. Bottura, and G. Barreto. 2005. “Iterative MOESP type algorithm for discrete time variant system identification.” In Proc., 2005 IEEE Int. Symp. Mediterrean Conf. Control and Automation Intelligent Control, 399–404. New York: IEEE. https://doi.org/10.1109/.2005.1467048.
Ubertini, F., N. Cavalagli, A. Kita, and G. Comanducci. 2018. “Assessment of a monumental masonry bell-tower after 2016 central Italy seismic sequence by long-term SHM.” Bull. Earthquake Eng. 16 (2): 775–801. https://doi.org/10.1007/s10518-017-0222-7.
Van Overschee, P., and B. De Moor. 1996. Subspace identification for linear systems. Boston: Springer.
Verhaegen, M. 1994. “Identification of the deterministic part of MIMO state space models given in innovations from input-output data.” Automatica 30 (1): 61–74. https://doi.org/10.1016/0005-1098(94)90229-1.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Oct 12, 2020
Accepted: Jan 25, 2021
Published online: Apr 20, 2021
Published in print: Jul 1, 2021
Discussion open until: Sep 20, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.