ANCF Multiplicative-Decomposition Thermoelastic Approach for Arbitrary Geometry
Publication: Journal of Structural Engineering
Volume 147, Issue 7
Abstract
The classical approach for the thermal analysis of solids and fluids uses the strain additive decomposition to account for the effect of the temperature. This strain-based approach does not properly capture the effect of complex stress-free reference-configuration geometry, is applicable only to small deformation problems, and leads to simplified expression for the Green–Lagrange strain tensor. In view of the geometric description of the absolute nodal coordinate formulation (ANCF), a new ANCF gradient-based approach is proposed. This approach employs a multiplicative decomposition of the matrix of position-gradient vectors in the stress-free reference configuration into two position-gradient matrices. One matrix is associated with the reference-configuration geometry before the application of the thermal load, and the other accounts for the volumetric change due to the change in temperature. A numerical study demonstrated the implementation of the proposed gradient-based approach.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This research was supported by the National Science Foundation (Project Nos. 1632302 and 1852510), and by China Postdoctoral Science Foundation (Project No. 2020M683601).
References
API (American Petroleum Institute). 2004. “Temperature and pressure volume correction factors for generalized crude oils, refined products, and lubricating oils.” Chap. 11.1 in Manual of petroleum measurement standards. Washington, DC: API Publishing Services.
Bair, S. 2019. High pressure rheology for quantitative elastohydrodynamics. 2nd ed. 223–257. Amsterdam, Netherlands: Elsevier Science.
Beer, F., R. Johnston, J. Dewolf, and D. Mazurek. 2009. Mechanics of materials. New York: McGraw-Hill Companies.
Bonet, J., and R. D. Wood. 1997. Nonlinear continuum mechanics for finite element analysis. Cambridge, UK: Cambridge University Press.
Bower, A. F. 2009. Applied mechanics of solids. 1st ed. Boca Raton, FL: CRC Press.
Chang, C., Q. D. Nguyen, and H. P. Rønningsen. 1999. “Isothermal start-up of pipeline transporting waxy crude oil.” J. Non-Newtonian Fluid Mech. 87 (2–3): 127–154. https://doi.org/10.1016/S0377-0257(99)00059-2.
Chen, Y., D. G. Zhang, and L. Li. 2019. “Dynamic analysis of rotating curved beams by using Absolute Nodal Coordinate Formulation based on radial point interpolation method.” J. Sound Vib. 441: 63–83. https://doi.org/10.1016/j.jsv.2018.10.011.
Cook, R. D. 1981. Concepts and applications of finite element analysis. New York: Wiley.
Cui, Y.-Q., Z.-Q. Yu, and P. Lan. 2019. “A novel method of thermo-mechanical coupled analysis based on the unified description.” Mech. Mach. Theory 134: 376–392. https://doi.org/10.1016/j.mechmachtheory.2019.01.001.
Darijani, H., and R. Naghdabadi. 2013. “Kinematics and kinetics modeling of thermoelastic continua based on the multiplicative decomposition of the deformation gradient.” Int. J. Eng. Sci. 62: 56–69. https://doi.org/10.1016/j.ijengsci.2012.07.001.
Dmitrochenko, O. N., and D. Y. Pogorelov. 2003. “Generalization of plate finite elements for absolute nodal coordinate formulation.” Multibody Syst. Dyn. 10 (1): 17–43. https://doi.org/10.1023/A:1024553708730.
Dorfman, A., and Z. Renner. 2009. “Conjugate problems in convective heat transfer: Review.” Math. Probl. Eng. 2009: 927350. https://doi.org/10.1155/2009/927350.
Engineering ToolBox. 2003. “Coefficients of linear thermal expansion.” Accessed Februrary 22, 2021. https://www.engineeringtoolbox.com/linear-expansion-coefficients-d_95.html.
Errara, M. P., and S. Chemin. 2013. “Optimal solutions of numerical interface conditions in fluid–structure thermal analysis.” J. Comput. Phys. 245 (Jul): 431–455. https://doi.org/10.1016/j.jcp.2013.03.004.
Farin, G. 1999. Curves and surfaces for CAGD: A practical guide. 5th ed. San Francisco: Morgan Kaufmann.
Fotland, G., C. Haskins, and T. Rølvåg. 2019. “Trade study to select best alternative for cable and pulley simulation for cranes on offshore vessels.” Syst. Eng. 23 (2): 177–188. https://doi.org/10.1002/sys.21503.
Gallier, J. 2011. Geometric methods and applications: For computer science and engineering. New York: Springer.
Goetz, A. 1970. Introduction to differential geometry. Upper Saddle River, NJ: Addison Wesley.
Helselhaus, A., T. Vogel, and H. Krain. 1992. “Coupling of 3D-Navier-Stokes external flow calculations and internal 3D-heat-conduction calculations for cooled turbine blades.” In Proc., AGARD Meeting on Heat Transfer and Cooling in Gas Turbines, 40-1–40-9. Köln-Porz, Germany: AGARD.
Henshaw, W. D., and K. K. Chand. 2009. “A composite grid solver for conjugate heat transfer in fluid–structure systems.” J. Comput. Phys. 228 (10): 3708–3741. https://doi.org/10.1016/j.jcp.2009.02.007.
Hewlett, J. 2019. “Methods for real-time simulation of systems of rigid and flexible bodies with unilateral contact and friction.” Ph.D. thesis, Dept. of Mechanical Engineering, McGill Univ.
Hewlett, J., S. Arbatani, and J. Kovecses. 2020. “A fast and stable first-order method for simulation of flexible beams and cables.” Nonlinear Dyn. 99 (2): 1211–1226. https://doi.org/10.1007/s11071-019-05347-1.
Htun, T. Z., H. Suzuki, and D. Garcia-Vallejo. 2020. “Dynamic modeling of a radially multilayered tether cable for a remotely-operated underwater vehicle (ROV) based on the absolute nodal coordinate formulation (ANCF)” Mech. Mach. Theory 153: 103961. https://doi.org/10.1016/j.mechmachtheory.2020.103961.
Karbhari, V. M., ed. 2007. “Fabrication, quality and service-life issues for composites in civil engineering.” In Chap. 2 in Durability of composites for civil structural applications, 13–30. 1st ed. Lisle, IL: Woodhead.
Khan, I. M., and K. S. Anderson. 2013. “Divide-and-conquer-based large deformation formulations for multi-flexible body systems.” In Vol. 7B of Proc., ASME 9th Int. Conf. on Multibody Systems, Nonlinear Dynamics, and Control, V07BT10A002-1–V07BT10A002-10. Portland, OR: ASME Design Engineering Div., ASME Computers and Information in Engineering Div.
Kłodowski, A., T. Rantalainen, A. Mikkola, A. Heinonen, and H. Sievänen. 2011. “Flexible multibody approach in forward dynamic simulation of locomotive strains in human skeleton with flexible lower body bones.” Multibody Syst. Dyn. 25 (4): 395–409. https://doi.org/10.1007/s11044-010-9240-9.
Kreyszig, E. 1991. Differential geometry. New York: Dover.
Laflin, J. J., K. S. Anderson, I. M. Khan, and M. Poursina. 2014. “New and extended applications of the divide-and-conquer algorithm for multibody dynamics.” ASME J. Comput. Nonlinear Dyn. 9 (4): 041004-1. https://doi.org/10.1115/1.4027869.
Lee, J.-H., and T.-W. Park. 2012. “Development and verification of a dynamic analysis model for the current-collection performance of high-speed trains using the absolute nodal coordinate formulation.” Trans. Korean Soc. Mech. Eng. A 36 (3): 339–346. https://doi.org/10.3795/KSME-A.2012.36.3.339.
Li, S., Y. Wang, X. Ma, and S. Wang. 2019. “Modeling and simulation of a moving yarn segment: Based on the absolute nodal coordinate formulation.” Math. Probl. Eng. 2019: 6567802. https://doi.org/10.1155/2019/6567802.
Logan, D. L. 2017. A first course in the finite element method. 6th ed. Boston: Cengage Learning.
LS-DYNA. 2018. LS-DYNA keyword user’s manual. Livermore, CA: Livermore Software Technology Corporation.
Lubarda, V. A. 2004. “Constitutive theories based on the multiplicative decomposition of deformation gradient: Thermoelasticity, elastoplasticity, and biomechanics.” Appl. Mech. Rev. 57 (2): 95–108. https://doi.org/10.1115/1.1591000.
Mikkola, A. M., and A. A. Shabana. 2003. “A non-incremental finite element procedure for the analysis of large deformation of plates and shells in mechanical system applications.” Multibody Syst. Dyn. 9 (3): 283–309. https://doi.org/10.1023/A:1022950912782.
Nachbagauer, K. 2013. “Development of shear and cross section deformable beam finite elements applied to large deformation and dynamics problems.” Ph.D. dissertation, Institute of Technical Mechanics, Johannes Kepler Univ.
Nachbagauer, K. 2014. “State of the art of ANCF elements regarding geometric description, interpolation strategies, definition of elastic forces, validation and locking phenomenon in comparison with proposed beam finite elements.” Arch. Comput. Methods Eng. 21 (3): 293–319. https://doi.org/10.1007/s11831-014-9117-9.
Nachbagauer, K., A. S. Pechstein, H. Irschik, and J. Gerstmayr. 2011. “A new locking-free formulation for planar, shear deformable, linear and quadratic beam finite elements based on the absolute nodal coordinate formulation” Multibody Syst. Dyn. 26 (3): 245–263. https://doi.org/10.1007/s11044-011-9249-8.
Obrezkov, L., P. Eliasson, A. B. Harish, and M. K. Matikainen. 2021. “Usability of finite elements based on the absolute nodal coordinate formulation for deformation analysis of the Achilles tendon.” Int. J. Non Linear Mech. 129 (103662): 1–11. https://doi.org/10.1016/j.ijnonlinmec.2020.103662.
Ogden, R. W. 1984. Non-linear elastic deformations. Mineola, NY: Dover.
Ojas, J., and P. Leyland. 2014. “Stability analysis of a partitioned fluid–structure thermal coupling algorithm.” J. Thermophys. Heat Transfer 28 (1): 59–67. https://doi.org/10.2514/1.T4032.
Olshevskiy, A., O. Dmitrochenko, and C.-W. Kim. 2014. “Three-dimensional solid brick element using slopes in the absolute nodal coordinate formulation.” ASME J. Comput. Nonlinear Dyn. 9 (2): 021001-1. https://doi.org/10.1115/1.4024910.
Orzechowski, G. 2012. “Analysis of beam elements of circular cross section using the absolute nodal coordinate formulation.” Arch. Mech. Eng. 59 (3): 283–296. https://doi.org/10.2478/v10180-012-0014-1.
Orzechowski, G., and J. Fraczek. 2015. “nearly incompressible nonlinear material models in the large deformation analysis of beams using ANCF.” Nonlinear Dyn. 82 (1): 451–464. https://doi.org/10.1007/s11071-015-2167-1.
Orzechowski, G., and J. Frączek. 2012. “Integration of the equations of motion of multibody systems using absolute nodal coordinate formulation” Acta Mech. Autom. 6 (2): 75–83.
Pan, K., and D. Cao. 2020. “Absolute nodal coordinate finite element approach to the two-dimensional liquid sloshing problems.” Proc. Inst. Mech. Eng. Part K: J. Multi-body Dyn. 234 (2): 1–25. https://doi.org/10.1177/1464419320907785.
Perelman, T. L. 1961. “On conjugated problems of heat transfer.” Int. J. Heat Mass Transfer 3 (4): 293–303. https://doi.org/10.1016/0017-9310(61)90044-8.
Piegl, L., and W. Tiller. 1997. The NURBS book. 2nd ed. Berlin: Springer.
Roe, B., A. Haselbacher, and P. H. Geubelle. 2007. “Stability of fluid–structure thermal simulations on moving grids.” Int. J. Numer. Methods Fluids 54 (9): 1097–1117. https://doi.org/10.1002/fld.1416.
Roe, B., R. Jaiman, A. Haselbacher, and P. H. Geubelle. 2008. “Combined interface boundary method for coupled thermal simulations.” Int. J. Numer. Methods Fluids 57 (3): 329–354. https://doi.org/10.1002/fld.1637.
Rogers, D. F. 2001. An introduction to NURBS with historical perspective. San Diego: Academic Press.
Rus, D., and M. T. Tolley. 2015. “Design, fabrication and control of soft robots.” Nature 521: 467–475. https://doi.org/10.1038/nature14543.
Shabana, A. 1986. “Thermal analysis of viscoelastic multibody systems.” Mech. Mach. Theory 21 (3): 231–242. https://doi.org/10.1016/0094-114X(86)90099-6.
Shabana, A. A. 2015. “Definition of ANCF finite elements.” ASME J. Comput. Nonlinear Dyn. 10 (5): 054506-1. https://doi.org/10.1115/1.4030369.
Shabana, A. A. 2018. Computational continuum mechanics. 3rd ed. Cambridge, UK: Cambridge University Press.
Shabana, A. A., and H. Ling. 2019. “Noncommutativity of finite rotations and definitions of curvature and torsion.” ASME J. Comput. Nonlinear Dyn. 14 (9): 091005-1. https://doi.org/10.1115/1.4043726.
Shen, Z., C. Liu, and H. Li. 2020. “Viscoelastic analysis of bistable composite shells via absolute nodal coordinate formulation.” Compos. Struct. 248: 112537. https://doi.org/10.1016/j.compstruct.2020.112537.
Shen, Z., Q. Tian, X. Liu, and G. Hu. 2013. “Thermally induced vibrations of flexible beams using Absolute Nodal Coordinate Formulation.” Aerosp. Sci. Technol. 29 (1): 386–393. https://doi.org/10.1016/j.ast.2013.04.009.
Spencer, A. J. M. 1980. Continuum mechanics. London: Longman.
Takahashi, Y., N. Shimizu, and K. Suzuki. 2005. “Study on the frame structure modeling of the beam element formulated by absolute Nodal coordinate approach.” J. Mech. Sci. Technol. 19: 283–291. https://doi.org/10.1007/BF02916146.
Tian, Q., L. P. Chen, Y. Q. Zhang, and J. Z. Yang. 2009. “An efficient hybrid method for multibody dynamics simulation based on absolute nodal coordinate formulation.” ASME J. Comput. Nonlinear Dyn. 4 (2): 021009-1. https://doi.org/10.1115/1.3079783.
Trivedi, D., D. Dienno, and C. D. Rahn. 2008. “Optimal, model-based design of soft robotic manipulators.” ASME J. Mech. Des. 130 (9): 091402-1–091402-9. https://doi.org/10.1115/1.2943300.
Ukani, S. S., C. W. Chang and A. A. Shabana. 1988. “Thermoelastic analysis of flexible multi-body machine tool mechanisms.” ASME J. Mech. Transm. Autom. Des. 110 (1): 48–55. https://doi.org/10.1115/1.3258904.
Vujosevic, L., and V. A. Lubarda. 2002. “Finite-strain thermoelasticity based on multiplicative decomposition of deformation gradient.” Theor. Appl. Mech. 28–29: 379–399. https://doi.org/10.2298/TAM0229379V.
Yamano, A., A. Shintani, A. Ito, T. Nakagawa, and H. Ijima. 2020. “Influence of boundary conditions on a flutter-mill.” J. Sound Vib. 478: 115359. https://doi.org/10.1016/j.jsv.2020.115359.
Yoo, W.-S., J.-H. Lee, S.-J. Park, J.-H. Sohn, D. Pogolev, and O. Dmitrochenko. 2004. “Large deflection analysis of a thin plate: Computer simulation and experiment.” Multibody Syst. Dyn. 11 (2): 185–208. https://doi.org/10.1023/B:MUBO.0000025415.73019.bb.
Yu, L., Z. Zhao, J. Tang, and G. Ren. 2010. “Integration of absolute nodal elements into multibody system.” Nonlinear Dyn. 62 (4): 931–943. https://doi.org/10.1007/s11071-010-9775-6.
Zienkiewicz, O. C. 1977. The finite element method. 3rd ed. New York: McGraw-Hill.
Zienkiewicz, O. C., and R. L. Taylor. 2000. The finite element method, Vol. 2: Solid mechanics. Oxford: Butterworth-Heinemann.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 147 • Issue 7 • July 2021
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jul 5, 2020
Accepted: Jan 7, 2021
Published online: Apr 23, 2021
Published in print: Jul 1, 2021
Discussion open until: Sep 23, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Ahmed E. Eldeeb, Dayu Zhang, Ahmed A. Shabana, Cross-section deformation, geometric stiffening, and locking in the nonlinear vibration analysis of beams, Nonlinear Dynamics, 10.1007/s11071-021-07102-x, 108, 2, (1425-1445), (2022).