Experimental Investigation and Finite-Element Modeling of an Aluminum Energy Dissipater for Cross-Laminated Timber Walls under Reverse Cyclic Loading
Publication: Journal of Structural Engineering
Volume 147, Issue 4
Abstract
Cross-laminated timber (CLT) panels with unbonded post-tensioning and a rocking mechanism can be used as a robust lateral load–resisting system (LLRS). The seismic performance of these systems can be improved further by incorporating external sacrificial energy dissipating elements. The additional damping provided by the energy dissipaters reduces the structural displacement demand during a design-level earthquake, and the unbonded post-tensioning provides recentering ability. This study developed a surface mountable, easily replaceable sacrificial oval metallic element specific to the CLT walls using aluminum was. This connector contributes to the wall system lateral load capacity. Laboratory testing of the aluminum connectors under cyclic shear loading was performed to characterize the force–displacement behavior and energy dissipating capacity. A detailed three-dimensional (3D) finite-element analysis (FEA) of aluminum connectors was carried out to replicate the observed experimental behavior. The experimental results, analytical modeling, and design equations for connector force–displacement response based on first principles are presented in this paper. The test results showed that the O-connectors can be used as an effective energy-dissipating element with equivalent damping ratio varying between 20% and 40%. The simplified design equations calculated the response within 90% of the measured values.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code generated or used during the study are available in a repository online in accordance with funder data retention policies. The repository is accessible at https://www.designsafe-ci.org/data/browser/public/designsafe.storage.published//PRJ-2485.
Acknowledgments
The authors acknowledge the financial support from National Science Foundation (NSF) for this research under Grant No. CMMI 1537788. The authors thank Collin Sewell, research engineer at the Large Scale Structures Laboratory at The University of Alabama, and several undergraduate students for helping with test setup and testing. The opinions, findings, and conclusions expressed in the paper are those of the authors, and do not necessarily reflect the views of NSF.
References
Aaleti, S. 2009. “Behavior of rectangular concrete walls subjected to simulated seismic loading.” Ph.D. dissertation, Dept. of Civil, Construction and Environmental Engineering, Iowa State Univ.
Aaleti, S., and S. Sritharan. 2009. “A simplified analysis method for characterizing unbonded post-tensioned precast wall systems.” Eng. Struct. 31 (12): 2966–2975. https://doi.org/10.1016/j.engstruct.2009.07.024.
ACI (American Concrete Institute). 2007. Acceptance criteria for special unbonded post-tensioned precast structural walls based on validation testing. Farmington Hills, MI: ACI.
ANSI/APA (American National Standards Institution/APA–The Engineered Wood Association). 2012. Standard for performance-rated cross-laminated timber. Tacoma, WA: ANSI/APA.
ASTM. 2015. Standard test methods for tension testing of wrought and cast aluminum- and magnesium-alloy products. ASTM B557M. West Conshohocken, PA: ASTM.
AWC (American Wood Council). 2015. National design specification for wood construction. Leesburg, VA: AWC.
Baird, A., T. Smith, A. Palermo, and S. Pampanin. 2014. “Experimental and numerical study of U-shape flexural plate (UFP) dissipators.” In Proc., New Zealand Society for Earthquake Engineering (NZSEE) Annual Technical Conf. Auckland, New Zealand: Aotea Centre.
Blandon, U. 2004. “Equivalent viscous damping for direct displacement based design.” M.Sc. thesis, Rose School, European School of Advanced Studies in Reduction of Seismic Risk.
CLT Handbook. 2013. CLT handbook: Special publication SP-529E. Pointe-Claire, QC, Canada: FPInnovations.
Ganey, R., J. Berman, T. Akbas, S. Loftus, J. D. Dolan, R. Sause, J. Ricles, S. Pei, J. van de Lindt, and H.-E. Blomgren. 2017. “Experimental investigation of self-centering cross-laminated timber walls.” J. Struct. Eng. 143 (10): 04017135. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001877.
Gavric, I., M. Fragiacomo, and A. Ceccotti. 2015. “Cyclic behaviour of typical metal connectors for cross-laminated (CLT) structures.” Mater. Struct. 48 (6): 1841–1857. https://doi.org/10.1617/s11527-014-0278-7.
Henry, R. S., S. Aaleti, S. Sritharan, and J. M. Ingham. 2010. “Concept and finite-element modeling of new steel shear connectors for self-centering wall systems.” J. Eng. Mech. 136 (2): 220–229. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000071.
Iqbal, A., S. Pampanin, A. Palermo, and A. H. Buchanan. 2015. “Performance and design of LVL walls coupled with UFP dissipaters.” J. Earthquake Eng. 19 (3): 383–409. https://doi.org/10.1080/13632469.2014.987406.
Pei, S., J. Berman, D. Dolan, J. van de Lindt, J. Ricles, R. Sause, H.-E. Blomgren, M. Popovski, and D. Rammer. 2014. “Progress on the development of seismic resilient tall CLT buildings in the Pacific Northwest.” In Proc., World Conf. on Timber Engineering. Quebec City, Canada: World Conference on Timber Engineering.
Pei, S., D. Rammer, M. Popovski, T. Williamson, P. Line, and J. W. van de Lindt. 2016. “An overview of CLT research and implementation in North America.” In Proc., World Conf. on Timber Engineering. Vienna, Austria: World Conference on Timber Engineering.
Priestley, M. J. N. 1991. “Overview of PRESSS research program.” PCI J. 36 (4): 50–57. https://doi.org/10.15554/pcij.07011991.50.57.
Rahman, A. M., and J. I. Restrepo. 2000. Earthquake resistant precast concrete buildings: Seismic performance of cantilever walls prestressed using unbonded tendons. Christchurch, New Zealand: Univ. of Canterbury.
Restrepo, J. I., and A. Rahman. 2007. “Seismic performance of self-centering structural walls incorporating energy dissipators.” J. Struct. Eng. 133 (11): 1560–1570. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:11(1560).
Shultz, A. E., and R. A. Magana. 1996. “Seismic behavior of connections in precast concrete walls.” In Proc., Mete A. Sozen Symp., Farmington Hills, MI: American Concrete Institute.
Sritharan, S., S. Aaleti, R. S. Henry, K.-Y. Liu, and K.-C. Tsai. 2015. “Precast concrete wall with end columns (PreWEC) for earthquake resistant design.” Earthquake Eng. Struct. Dyn. 44 (12): 2075–2092. https://doi.org/10.1002/eqe.2576.
Twigden, K. M., and R. S. Henry. 2015. “Experimental response and design of O-connectors for rocking wall systems.” Structures 3 (Aug): 261–271. https://doi.org/10.1016/j.istruc.2015.06.002.
van de Lindt, J. W., J. Furley, M. O. Amini, S. Pei, G. Tamgnone, A. R. Barbosa, D. Rammer, P. Line, M. Fragiacomo, and M. Popovski. 2018. “Experimental seismic behavior of a two-story CLT platform building.” Eng. Struct. 183 (Mar): 408–422. https://doi.org/10.1016/j.engstruct.2018.12.079.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Dec 13, 2019
Accepted: Dec 2, 2020
Published online: Jan 26, 2021
Published in print: Apr 1, 2021
Discussion open until: Jun 26, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.