Laterally Offset RHS X-Connections
Publication: Journal of Structural Engineering
Volume 147, Issue 1
Abstract
The design of welded rectangular hollow section (RHS) truss-type connections, in which branches are laterally offset from the chord centerline, is not included in any of the current design codes and standards. To provide design recommendations for this type of connection, a series of studies have been performed on cold-formed welded RHS-to-RHS X-connections with branch lateral offset. An experimental study of 14 full-scale laboratory tests has been conducted, including 4 nonoffset control specimens and 10 laterally offset specimens. Two failure mode models representing the behavior of such connections have been proposed, and their validity is evaluated by the experimental results. Following the experimentation, a numerical study with a broader range of parameters was performed on such RHS connections, where nonlinear finite element (FE) models were created and validated against the laboratory tests. Based on the results of the experimental and numerical studies, one of the analytical models—a combined yield-line mechanism—is recommended to be used for the design of laterally offset RHS X-connections.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The Natural Sciences and Engineering Research Council of Canada (NSERC) provided financial support for this project, and Atlas Tube, Harrow, Ontario, donated hollow structural sections.
References
AISC. 2010. Specification for structural steel buildings. ANSI/AISC 360-10. Chicago: AISC.
AISC. 2016. Specification for structural steel buildings. ANSI/AISC 360-16. Chicago: AISC (American Iron and Steel Institute).
AISI (American Iron and Steel Institute). 2016. North American specification for the design of cold-formed steel structural members. AISI S100-16. Washington, DC: AISI.
ASTM. 2016. Standard test methods for tension testing of metallic materials. ASTM E8/E8M-16ae1. West Conshohocken, PA: ASTM.
ASTM. 2018. Standard specification for cold-formed welded and seamless carbon steel structural tubing in rounds and shapes. ASTM A500/A500M-18. West Conshohocken, PA: ASTM.
Bjorhovde, R., and P. C. Birkemoe. 1979. “Limit states design of HSS columns.” Can. J. Civ. Eng. 6 (2): 276–291. https://doi.org/10.1139/l79-029.
Björk, T., A. Ahola, and N. Tuominen. 2019. “Distortional buckling of X-joints made of square hollow cross-section beams: Theoretical energy-based model.” Steel Constr. 12 (1): 55–63. https://doi.org/10.1002/stco.201800002.
Brasil, D., L. Lima, P. Vellasco, and A. Silva. 2016. “Structural analyses of reinforced tubular T-joints.” REM: Escola de Minas 69 (1): 13–19. https://doi.org/10.1590/0370-44672015690107.
Bu, X.-D., and J. A. Packer. 2020. “Chord end distance effect on RHS connections.” J. Constr. Steel Res. 168 (May): 105992. https://doi.org/10.1016/j.jcsr.2020.105992.
Callister, W. D. 2007. Material science and engineering: An introduction. 7th ed. Hoboken, NJ: Wiley.
CEN (European Committee for Standardization). 2005a. Eurocode 3: Design of steel structures—Part 1-1: General rules and rules for buildings. EN 1993-1-1:2005. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2005b. Eurocode 3: Design of steel structures—Part 1-8: Design of joints. EN 1993-1-8:2005. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2006. Eurocode 3: Design of steel structures—Part 1-5: Plated structural elements. EN 1993-1-5:2006. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2019. Eurocode 3: Design of steel structures—Part 1-8: Design of joints. EN 1993-1-8:2005. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2020. Eurocode 3: Design of steel structures—Part 1-14: Design assisted by finite element analysis. EN 1993-1-14:2020. Brussels, Belgium: CEN.
CSA (Canadian Standard Association). 2019. Design of steel structures. CSA S16:19. Toronto: CSA.
Dawe, J. L., Y. Liu, R. Zhang, and A. Dukuze. 2006. “Experimental study of offset HSS connections.” J. Struct. Eng. 132 (5): 717–725. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:5(717).
Fan, Y., and J. A. Packer. 2017. “RHS-to-RHS axially loaded X-connections near an open chord end.” Can. J. Civ. Eng. 44 (11): 881–892. https://doi.org/10.1139/cjce-2017-0148.
Fisher, J. W., M. K. Ravindra, G. L. Kulak, and T. V. Galambos. 1978. “Load and resistance factor design criteria for connectors.” J. Struct. Div. 104 (9): 1427–1441.
ISO. 2013. Static design procedure for welded hollow section joints—Recommendations. ISO 14346. Geneva: ISO.
Kožich, M., P. Jehlička, F. Wald, X.-D. Bu, J. A. Packer, and J. Kabeláč. 2019. “Towards establishing a design resistance for hollow section joints.” In Proc., 17th Int. Symp. on Tubular Structures, 643–650. Singapore: Research Publishing Services.
Kuhn, J., J. A. Packer, and Y. Fan. 2019. “Rectangular hollow section webs under transverse compression.” Can. J. Civ. Eng. 46 (9): 810–827. https://doi.org/10.1139/cjce-2018-0485.
Liu, J. 2016. “Updates to expected yield stress and tensile strength ratios for determination of expected member capacity in the 2016 AISC seismic provisions.” Eng. J. 53 (4): 215–228.
Liu, J., R. Sabelli, R. L. Brockenbrough, and T. P. Fraser. 2007. “Expected yield stress and tensile strength ratios for determination of expected member capacity in the 2005 AISC seismic provisions.” Eng. J. 44 (1): 15–25.
Lu, L. H., G. D. de Winkel, Y. Yu, and J. Wardenier. 1994. “Deformation limit for the ultimate strength of hollow section joints.” In Proc., 6th Int. Symp. on Tubular Structures, 341–348. Rotterdam, Netherlands: A.A. Balkema.
Martinez-Saucedo, G., J. A. Packer, and S. Willibald. 2006. “Parametric finite element study of slotted end connections to circular hollow sections.” Eng. Struct. 28 (14): 1956–1971. https://doi.org/10.1016/j.engstruct.2006.03.023.
Nizer, A., L. R. O. Lima, P. C. G. S. Vellasco, S. A. L. Andrade, E. S. Goulart, A. T. Silva, and L. F. C. Neves. 2016. “Experimental and numerical assessment of RHS T-joints subjected to brace and chord axial forces.” Steel Constr. 9 (4): 315–322. https://doi.org/10.1002/stco.201610036.
Packer, J. A., D. Sherman, and M. Lecce. 2010. Hollow structural section connections: AISC design guide no. 24. 1st ed. Chicago: AISC.
Packer, J. A., J. Wardenier, X.-L. Zhao, G. J. van der Vegte, and Y. Kurobane. 2009. Design guide for rectangular hollow section (RHS) joints under predominantly static loading: CIDECT design guide no. 3. 2nd ed. Geneva: Comité International pour le Développement et l’Étude de la Construction Tubulaire.
Ravindra, M. K., and T. V. Galambos. 1978. “Load and resistance factor design for steel.” J. Struct. Div. 104 (9): 1337–1353.
Roddam Appireddy, K. C. R. 2016. “Residual stresses in hollow section joint.” Master’s thesis, Dept. of Steel and Timber Structures, Czech Technical Univ.
Tousignant, K., and J. A. Packer. 2017. “Numerical investigation of fillet welds in HSS-to-rigid end-plate connections.” J. Struct. Eng. 143 (12): 04017165. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001889.
Voth, A. P., and J. A. Packer. 2012. “Branch plate-to-circular hollow structural section connections. I: Experimental investigation and finite-element modeling.” J. Struct. Eng. 138 (8): 995–1006. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000505.
Wald, F., et al. 2017. Benchmark cases for advanced design of structural steel connections. 2nd ed. Prague, Czechia: Czech Technical Univ. in Prague.
Wei, F., and J. A. Packer. Forthcoming. “AISC provisions for web stability under local compression applied to HSS.” Eng. J. 58.
Wilkinson, T. 1999. “The plastic behaviour of cold-formed rectangular hollow sections.” Ph.D. thesis, School of Civil Engineering, Univ. of Sydney.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Mar 31, 2020
Accepted: Jul 22, 2020
Published online: Oct 19, 2020
Published in print: Jan 1, 2021
Discussion open until: Mar 19, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.