Seismic Behavior of Welded Beam-to-Column Joints of High-Strength Steel-Moment Frame with Replaceable Damage-Control Fuses
Publication: Journal of Structural Engineering
Volume 146, Issue 8
Abstract
This paper first proposes a high-strength (HS) steel-moment frame structure with replaceable damage-control fuses, which utilized the very large elastic deformation capacity of HS steel and damage-control functions of fuses. The damage is basically concentrated to fuses even under very rare earthquakes, and the damaged fuses can be easily replaced after earthquakes. A test program including 11 full-scale specimens was carried out to study the seismic behavior of HS steel beam-to-column joints either with or without fuses. The investigated parameters include different types of fuses, different thickness of the fuse plate, and different ways to strengthen the out-of-plane stiffness of fuse plates. The failure mode, deformation progress, hysteretic responses, skeleton curves, bending strengths, and energy-dissipation capacity of these full-scale tests were reported, analyzed, and discussed. Test results showed that the HS steel joints with fuses were able to provide large damage-free deformation. The application of proposed fuses in the HS steel-moment frame effectively shifted the damage from beam-to-column welds to replaceable fuse plates. Meanwhile, the shape of fuse plate exhibited marginal influence, but its thickness has significant influence on the T-joint. Formulas were proposed to estimate the yielding and ultimate bending strength of T-joint with fuses. Finally, a step-by-step procedure is given to design the proposed fuses.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research is in part supported by Scientific Research Fund of Institute of Engineering Mechanics, China Earthquake Administration (Grant No. 2017D01) and National Natural Science Foundation of China (Grant Nos. U1939210 and 51508381).
References
AISC. 1997. Seismic provisions for structural steel buildings. Chicago: AISC.
AISC. 2005. Seismic provisions for structural steel buildings. ANSI/AISC 341-05. Chicago: AISC.
AISC. 2016. Seismic provisions for structural steel buildings. Chicago: AISC.
Bruneau, M., S. El-Bahey, S. Fujikura, and D. Keller. 2010. Structural fuses and concrete filled steel shapes for seismic- and multi-hazard resistant design (5). Wellington, New Zealand: New Zealand Society for Earthquake Engineering.
Chan, R. W. K., F. Albermani, and M. S. Williams. 2009. “Evaluation of yielding shear panel device for passive energy dissipation.” J. Constr. Steel Res. 65 (2): 260–268.
Engelhardt, M. D., and T. Sabol. 1997. “Seismic-resistant steel moment connections: Developments since the 1994 Northridge earthquake.” Prog. Struct. Mater. Eng. 1 (1): 68–77. https://doi.org/10.1002/pse.2260010112.
Eriksen, J. 2007. “Seismic fuses.” In Modern steel construction, steel wise. Chicago: AISC.
Hu, F., G. Shi, and Y. Shi. 2017. “Experimental study on seismic behavior of high strength steel frames: Global response.” Eng. Struct. 131 (Jan): 163–179. https://doi.org/10.1016/j.engstruct.2016.11.013.
Jiang, Z.-Q., X.-F. Yang, C. Dou, C. Li, and A.-L. Zhang. 2019. “Cyclic testing of replaceable damper: Earthquake-resilient prefabricated column-flange beam-column joint.” Eng. Struct. 183 (Mar): 922–936. https://doi.org/10.1016/j.engstruct.2019.01.060.
Kimura, Y., K. Mutsukura, K. Kaneda, and A. Wada. 2012. “Proposal of new column support system to perform complete beam yielding mechanism.” In Proc., Behaviour of Steel Structures in Seismic Areas, 9–11. Leiden, Nertherlands: CRC Press.
Koetaka, Y., P. Chusilp, Z. Zhang, M. Ando, K. Suita, K. Inoue, and N. Uno. 2005. “Mechanical property of beam-to-column moment connection with hysteretic dampers for columns weak axis.” Eng. Struct. 27 (1):109–117. https://doi.org/10.1016/j.engstruct.2004.09.002.
Li, H.-N., and G. Li. 2007. “Experimental study of structure with ‘dual function’ metallic dampers.” Eng. Struct. 29 (8): 1917–1928. https://doi.org/10.1016/j.engstruct.2006.10.007.
Lin, X., T. Okazaki, K. Hayashi, and M. Nakashima. 2017. “Bolted built-up columns constructed of high-strength steel under combined flexure and compression.” J. Struct. Eng. 143 (2): 1–10. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001648.
Lin, X., K. Wu, A. K. Skalomenos, L. Lu, and S. Zhao. 2019. “Development of a buckling-restrained shear damper with demountable steel-concrete composite restrainers.” Soil Dyn. Earthquake Eng. 118 (Mar): 221–230. https://doi.org/10.1016/j.soildyn.2018.12.015.
Lin, X., H. Zhang, H. Chen, H. Chen, and J. Lin. 2015. “Field investigation on severely damaged aseismic buildings in 2014 Ludian earthquake” Earthquake Eng. Vib. 14 (1): 169–176. https://doi.org/10.1007/s11803-015-0014-5.
MacRae, G. A., and G. C. Clifton. 2017. “New Zealand research application of, and developments in, low damage technology for steel structures.” In Proc., 16th World Conf. on Earthquake Engineering, 9–13. Santiago, Chile: International Association for Earthquake Engineering.
Nakashima, M., K. Inoue, and M. Tada. 1998. “Classification of damage to steel buildings observed in the 1995 Hyogoken-Nanbu earthquake” Eng. Struct. 20 (4): 271–281. https://doi.org/10.1016/S0141-0296(97)00019-9.
Oh, S.-H., Y.-J. Kim, and H.-S. Ryu. 2009. “Seismic performance of steel structures with slit dampers.” Eng. Struct. 31 (9): 1997–2008. https://doi.org/10.1016/j.engstruct.2009.03.003.
Plumier, A., et al. 2006. Two innovations for earthquake resistant design–The INERD project. Luxembourg: Office for Official Publications of the European Communities.
Qu, B., X. Liu, H. Hou, C. Qiu, and D. Hu. 2018. “Testing of buckling-restrained braces with replaceable steel angle fuses.” J. Struct. Eng. 144 (3): 04018001. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001985.
Ricles, J., J. Fisher, L.-W. Lu, and E. Kaufmann. 2002. “Developments of improved welded moment connections for earthquake-resistant design.” J. Construct. Steel Res. 58 (5–8): 565–604. https://doi.org/10.1016/S0143-974X(01)00095-5.
Saravanan, M., R. Goswami, and G. S. Palani. 2018. “Replaceable fuses in earthquake resistant steel structures: A review.” Int. J. Steel Struct. 18 (3): 868–879. https://doi.org/10.1007/s13296-018-0035-9.
Takanashi, K., K. Miyazaki, K. Yamazaki, and Y. Shimura. 2010. “A new structural system using innovative high-strength steel aiming at zero earthquake damage” Struct. Eng. Int. 20 (1): 66–71. https://doi.org/10.2749/101686610791555658.
Vargas, R., and M. Bruneau. 2006. “Seismic design of multi-story buildings with metallic structural fuses.” In Proc., 8th U.S. National Conf. on Earthquake Engineering. CA.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: May 7, 2019
Accepted: Feb 4, 2020
Published online: May 20, 2020
Published in print: Aug 1, 2020
Discussion open until: Oct 20, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.