Experimental and Numerical Study of Wind-Pressure Distribution on Irregular-Plan-Shaped Building
Publication: Journal of Structural Engineering
Volume 146, Issue 7
Abstract
This paper presents a detailed study on an E-plan-shaped (asymmetry about both plan axes) building under wind excitation (wind angles varied from 0° to 330° at an interval of 30°). This study is conducted by the wind-tunnel procedure and by utilizing the computational fluid dynamics (CFD) technique numerically. The numerical study is performed using the and shear stress transport (SST) models. The pressure contours and mean pressure coefficients of all the faces are computed by both approaches. The results show a good agreement between the experimentally and numerically computed results. The SST model performed better in comparison with the model for computing the mean pressure coefficients. The maximum positive and negative mean pressures of some faces of the building are found at skew wind angles. Additionally, a comparative study of the pressure variation with a symmetrical E-plan-shaped building (having the same cross-section area) is conducted in this paper. This study has shown that a drastic increment in the pressure variation is noticed for both the maximum positive and negative mean pressure coefficients due to a small aerodynamic modification.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ai, Z. T., and C. M. Mak. 2018. “Wind-induced single-sided natural ventilation in buildings near a long street canyon: CFD evaluation of street configuration and envelope design.” J. Wind Eng. Ind. Aerodyn. 172 (Jan): 96–106. https://doi.org/10.1016/j.jweia.2017.10.024.
An, K., J. C. H. Fung, and S. H. L. Yim. 2013. “Sensitivity of inflow boundary conditions on downstream wind and turbulence profiles through building obstacles using a CFD approach.” J. Wind Eng. Ind. Aerodyn. 115 (Apr): 137–149. https://doi.org/10.1016/j.jweia.2013.01.004.
ASCE. 2010. Minimum design loads for buildings and other structures. ASCE 7. Reston, VA: ASCE.
AS/NZS (Australian/New-Zealand Standard). 2011. Structural design actions. Part 2: Wind actions. AS/NZS 1170-2. Sydney, Australia: AS/NZS.
Bashor, R., S. Bobby, T. Kijewski-Correa, and A. Kareem. 2012. “Full-scale performance evaluation of tall buildings under wind.” J. Wind Eng. Ind. Aerodyn. 104–106 (May–Jul): 88–97. https://doi.org/10.1016/j.jweia.2012.04.007.
Bhattacharyya, B., and S. K. Dalui. 2014. “Comparative study between regular and irregular plan shaped tall building under wind excitation by numerical technique.” In Proc., National Conf. on Innovations in Design and Construction of Industrial Structures, 10–15. Durgapur, West Bengal, India: National Institute of Technology.
Bhattacharyya, B., and S. K. Dalui. 2018. “Investigation of mean wind pressures on ‘E’ plan shaped tall building.” Wind Struct. Int. J. 26 (2): 99–114.
BS (British Standard). 1997. Loading for buildings—Part 2: Code of practice for wind loads. BS 6399-2. London: British Standard.
Calautit, J. K., and B. R. Hughes. 2014. “Wind tunnel and CFD study of the natural ventilation performance of a commercial multi-directional wind tower.” Build. Environ. 80 (Oct): 71–83. https://doi.org/10.1016/j.buildenv.2014.05.022.
Cao, J., Y. Tamura, and A. Yoshida. 2012. “Wind pressures on multi-level flat roofs of medium-rise buildings.” J. Wind Eng. Ind. Aerodyn. 103 (Apr): 1–15. https://doi.org/10.1016/j.jweia.2012.01.005.
Carassale, L., A. Freda, and M. Marrè-Brunenghi. 2014. “Experimental investigation on the aerodynamic behavior of square cylinders with rounded corners.” J. Fluids Struct. 44 (Jan): 195–204. https://doi.org/10.1016/j.jfluidstructs.2013.10.010.
Cluni, F., V. Gusella, S. M. J. Spence, and G. Bartoli. 2011. “Wind action on regular and irregular tall buildings: Higher order moment statistical analysis by HFFB and SMPSS measurements.” J. Wind Eng. Ind. Aerodyn. 99 (6–7): 682–690. https://doi.org/10.1016/j.jweia.2011.01.020.
Daniels, S. J., I. P. Castro, and Z. T. Xie. 2013. “Peak loading and surface pressure fluctuations of a tall model building.” J. Wind Eng. Ind. Aerodyn. 120 (Sep): 19–28. https://doi.org/10.1016/j.jweia.2013.06.014.
Elshaer, A., A. Gairola, K. Adamek, and G. Bitsuamlak. 2017. “Variations in wind load on tall buildings due to urban development.” Sustainable Cities Soc. 34 (Oct): 264–277. https://doi.org/10.1016/j.scs.2017.06.008.
Franke, J., C. Hirsch, A. G. Jensen, H. W. Krüs, M. Schatzmann, P. S. Westbury, S. D. Miles, J. A. Wisse, and N. G. Wright. 2004. “Recommendations on the use of CFD in wind engineering.” In Proc., Int. Conf. on Urban Wind Engineering and Building Aerodynamics: COST C14: Impact of Wind and Storm on City Life and Built Environment. Sint-Genesius-Rode, Belgium: Von Karman Institute.
Fu, J., Q. Zheng, J. Wu, and A. Xu. 2015. “Full-scale tests of wind effects on a long span roof structure.” Earthquake Eng. Eng. Vibr. 14 (2): 361–372. https://doi.org/10.1007/s11803-015-0028-z.
Fu, J. Y., Q. S. Li, J. R. Wu, Y. Q. Xiao, and L. L. Song. 2008. “Field measurements of boundary layer wind characteristics and wind-induced responses of super-tall buildings.” J. Wind Eng. Ind. Aerodyn. 96 (8–9): 1332–1358. https://doi.org/10.1016/j.jweia.2008.03.004.
Gao, Y., and W. K. Chow. 2005. “Numerical studies on air flow around a cube.” J. Wind Eng. Ind. Aerodyn. 93 (2): 115–135. https://doi.org/10.1016/j.jweia.2004.11.001.
Gomes, M. G., A. Moret Rodrigues, and P. Mendes. 2005. “Experimental and numerical study of wind pressures on irregular-plan shapes.” J. Wind Eng. Ind. Aerodyn. 93 (10): 741–756. https://doi.org/10.1016/j.jweia.2005.08.008.
Gu, M., and X. Du. 2005. “Experimental investigation of rain–wind-induced vibration of cables in cable-stayed bridges and its mitigation.” J. Wind Eng. Ind. Aerodyn. 93 (1): 79–95. https://doi.org/10.1016/j.jweia.2004.09.003.
Guha, T. K., R. N. Sharma, and P. J. Richards. 2012. “Internal pressure in a building with multiple dominant openings in a single wall: Comparison with the single opening situation.” J. Wind Eng. Ind. Aerodyn. 107–108 (Aug–Sep): 244–255. https://doi.org/10.1016/j.jweia.2012.04.023.
Huang, S., Q. S. Li, and S. Xu. 2007. “Numerical evaluation of wind effects on a tall steel building by CFD.” J. Constr. Steel Res. 63 (5): 612–627. https://doi.org/10.1016/j.jcsr.2006.06.033.
Hui, Y., Y. Tamura, A. Yoshida, and H. Kikuchi. 2013. “Pressure and flow field investigation of interference effects on external pressures between high-rise buildings.” J. Wind Eng. Ind. Aerodyn. 115 (Apr): 150–161. https://doi.org/10.1016/j.jweia.2013.01.012.
Hussain, M., and B. E. Lee. 1980. “A wind tunnel study of the mean pressure forces acting on large groups of low-rise buildings.” J. Wind Eng. Ind. Aerodyn. 6 (3–4): 207–225. https://doi.org/10.1016/0167-6105(80)90002-1.
IS (Indian Standard). 2015. Indian standard code of practice for design wind load on building and structures. IS 875 (Part 3). New Delhi, India: IS.
Kim, R., I. Lee, and K. Kwon. 2017. “Evaluation of wind pressure acting on multi-span greenhouses using CFD technique. Part 1: Development of the CFD model.” Biosyst. Eng. 164 (Dec): 235–256. https://doi.org/10.1016/j.biosystemseng.2017.09.008.
Kim, W., Y. Tamura, and A. Yoshida. 2011. “Interference effects on local peak pressures between two buildings.” J. Wind Eng. Ind. Aerodyn. 99 (5): 584–600. https://doi.org/10.1016/j.jweia.2011.02.007.
Kim, Y. C., and J. Kanda. 2013. “Wind pressures on tapered and set-back tall buildings.” J. Fluids Struct. 39 (May): 306–321. https://doi.org/10.1016/j.jfluidstructs.2013.02.008.
Kim, Y. M., and K. P. You. 2002. “Dynamic responses of a tapered tall building to wind loads.” J. Wind Eng. Ind. Aerodyn. 90 (12–15): 1771–1782. https://doi.org/10.1016/S0167-6105(02)00286-6.
Li, Q. S., J. Q. Fang, A. P. Jeary, and C. K. Wong. 1998. “Full scale measurements of wind effects on tall buildings.” J. Wind Eng. Ind. Aerodyn. 74–76 (Apr): 741–750. https://doi.org/10.1016/S0167-6105(98)00067-1.
Li, Q. S., J. Y. Fu, Y. Q. Xiao, Z. N. Li, Z. H. Ni, Z. N. Xie, and M. Gu. 2006. “Wind tunnel and full-scale study of wind effects on China’s tallest building.” Eng. Struct. 28 (12): 1745–1758. https://doi.org/10.1016/j.engstruct.2006.02.017.
Li, Q. S., Y. Q. Xiao, J. Y. Fu, and Z. N. Li. 2007. “Full-scale measurements of wind effects on the Jin Mao building.” J. Wind Eng. Ind. Aerodyn. 95 (6): 445–466. https://doi.org/10.1016/j.jweia.2006.09.002.
Lin, N., C. Letchford, Y. Tamura, B. Liang, and O. Nakamura. 2005. “Characteristics of wind forces acting on tall buildings.” J. Wind Eng. Ind. Aerodyn. 93 (3): 217–242. https://doi.org/10.1016/j.jweia.2004.12.001.
Loredo-Souza, A. M., and A. G. Davenport. 2002. “Wind tunnel aeroelastic studies on the behaviour of two parallel cables.” J. Wind Eng. Ind. Aerodyn. 90 (4–5): 407–414. https://doi.org/10.1016/S0167-6105(01)00211-2.
Mohotti, D., K. Wijesooriya, and D. Dias-da-Costa. 2019. “Comparison of Reynolds averaging Navier-Stokes (RANS) turbulent models in predicting wind pressure on tall buildings.” J. Build. Eng. 21 (Jan): 1–17. https://doi.org/10.1016/j.jobe.2018.09.021.
Perén, J. I., T. van Hooff, B. C. C. Leite, and B. Blocken. 2015. “CFD analysis of cross-ventilation of a generic isolated building with asymmetric opening positions: Impact of roof angle and opening location.” Build. Environ. 85 (Feb): 263–276. https://doi.org/10.1016/j.buildenv.2014.12.007.
Pozzuoli, C., G. Bartoli, U. Peil, and M. Clobes. 2013. “Serviceability wind risk assessment of tall buildings including aeroelastic effects.” J. Wind Eng. Ind. Aerodyn. 123 (Dec): 325–338. https://doi.org/10.1016/j.jweia.2013.09.014.
Simiu, E., and R. H. Scanlan. 1996. Wind effects on structures. Hoboken, NJ: Wiley.
Stathopoulos, T. 2006. “Pedestrian level winds and outdoor human comfort.” J. Wind Eng. Ind. Aerodyn. 94 (11): 769–780. https://doi.org/10.1016/j.jweia.2006.06.011.
Tanaka, H., Y. Tamura, K. Ohtake, M. Nakai, and Y. Chul Kim. 2012. “Experimental investigation of aerodynamic forces and wind pressures acting on tall buildings with various unconventional configurations.” J. Wind Eng. Ind. Aerodyn. 107–108 (Aug–Sep): 179–191. https://doi.org/10.1016/j.jweia.2012.04.014.
Tominaga, Y., S. Akabayashi, T. Kitahara, and Y. Arinami. 2015. “Air flow around isolated gable-roof buildings with different roof pitches: Wind tunnel experiments and CFD simulations.” Build. Environ. 84 (Jan): 204–213. https://doi.org/10.1016/j.buildenv.2014.11.012.
Tominaga, Y., A. Mochida, S. Murakami, and S. Sawaki. 2008. “Comparison of various revised k- models and LES applied to flow around a high-rise building model with shape placed within the surface boundary layer.” J. Wind Eng. Ind. Aerodyn. 96 (4): 389–411. https://doi.org/10.1016/j.jweia.2008.01.004.
Tse, K. T., P. A. Hitchcock, K. C. S. Kwok, S. Thepmongkorn, and C. M. Chan. 2009. “Economic perspectives of aerodynamic treatments of square tall buildings.” J. Wind Eng. Ind. Aerodyn. 97 (9–10): 455–467. https://doi.org/10.1016/j.jweia.2009.07.005.
Wong, N. H., and S. Heryanto. 2004. “The study of active stack effect to enhance natural ventilation using wind tunnel and computational fluid dynamics (CFD) simulations.” Energy Build. 36 (7): 668–678. https://doi.org/10.1016/j.enbuild.2004.01.013.
Wu, J. C., and L. Y. Cheng. 2005. “Effects of attack angle on performance of actively controlled high-rise building motion.” J. Wind Eng. Ind. Aerodyn. 93 (5): 413–434. https://doi.org/10.1016/j.jweia.2005.03.002.
Xing, F., D. Mohotti, and K. Chauhan. 2018. “Experimental and numerical study on mean pressure distributions around an isolated gable roof building with and without openings.” Build. Environ. 132 (Mar): 30–44. https://doi.org/10.1016/j.buildenv.2018.01.027.
Yi, J., and Q. S. Li. 2015. “Wind tunnel and full-scale study of wind effects on a super-tall building.” J. Fluids Struct. 58 (Oct): 236–253. https://doi.org/10.1016/j.jfluidstructs.2015.08.005.
Zhang, A., and M. Gu. 2008. “Wind tunnel tests and numerical simulations of wind pressures on buildings in staggered arrangement.” J. Wind Eng. Ind. Aerodyn. 96 (10–11): 2067–2079. https://doi.org/10.1016/j.jweia.2008.02.013.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Nov 19, 2018
Accepted: Jan 29, 2020
Published online: Apr 30, 2020
Published in print: Jul 1, 2020
Discussion open until: Sep 30, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.