Effect of GFRP Shear Stirrups on Strength of Two-Way GFRP RC Edge Slabs: Experimental and Finite-Element Investigations
Publication: Journal of Structural Engineering
Volume 146, Issue 5
Abstract
Glass-fiber-reinforced-polymer (GFRP) reinforcing bars have recently gained wide acceptance as a viable construction material for sustainable new constructions. Yet current codes and guidelines have not addressed the design of GFRP-reinforced-concrete edge-slab–column connections with FRP stirrups as shear reinforcement. This paper summarizes the experimental results for full-sized edge-slab–column connections reinforced with GFRP bars and stirrups. The effectiveness of the GFRP stirrups and their extension from the column face on the performance of the tested connections are examined. In addition, a nonlinear three-dimensional (3D) finite-element analysis (FEA) is used to perform an in-depth investigation. Then, a comprehensive parametric investigation is presented on edge connections with different stirrup sizes, extensions located at different distances from the column, and different spacings. The test results reveal that the presence of GFRP stirrups as a shear reinforcement in the slab around the column perimeter improved the punching-shear response. In addition, the FEA results are in good agreement with the experimental results in terms of ultimate load, cracking patterns, strains in the reinforcement and concrete, and load-deflection relationships, thereby confirming the accuracy of the finite-element model. The results confirm that the punching-shear resistance decreased with increasing stirrup spacing and increased with increasing stirrup size and extension from the column. Based on the numerical-simulation results, a simple design approach to predicate the ultimate capacity of the tested connections is proposed. The model yielded good yet conservative predictions with respect to the experimental results as well as the available results in the literature.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors wish to express their sincere gratitude to the Canada Research Chair in Advanced Composite Materials for Civil Structures, the Natural Sciences and Engineering Research Council of Canada (NSERC), the Fonds de Recherche du Québec en Nature et Technologies (FRQ-NT), the University of Sherbrooke Research Center on Composite Materials (CRUSMaC), and technical staff of the structural and materials laboratory in the Department of Civil Engineering at the University of Sherbrooke.
References
ACI (American Concrete Institute). 2012. Guide test methods for fiber-reinforced polymers (FRPs) for reinforcing or strengthening concrete structures. ACI 440.3R. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2014. Building code requirements for structural concrete and commentary. ACI 318. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2015. Guide for the design and construction of structural concrete reinforced with fiber-reinforced polymer bars. ACI 440.1R. Farmington Hills, MI: ACI.
Ahmed, E., B. Benmokrane, and M. Sansfaçon. 2017. “Case study: Design, construction, and performance of the la Chancelière parking garage’s concrete flat slabs reinforced with GFRP bars.” J. Compos. Constr. 21 (1): 05016001. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000656.
ANSYS. 2018. ANSYS user’s manual. Canonsburg, PA: ANSYS.
ASTM. 2011. Standard test method for tensile properties of fiber reinforced polymer matrix composite bars. ASTM D7205/D7205M. West Conshohocken, PA: ASTM.
Büyükkaragöz, A. 2010. “Finite element analysis of the beam strengthened with prefabricated reinforced concrete plate.” Sci. Res. Essays. 5 (6): 533–544.
Chansawat, K., S. Yim, and T. H. Miller. 2006. “Nonlinear finite element analysis of a FRP strengthened reinforced concrete bridge.” J. Bridge Eng. 11 (1): 21–32. https://doi.org/10.1061/(ASCE)1084-0702(2006)11:1(21).
CSA (Canadian Standard Association). 2014. Design of concrete structures. CAN/CSA-A23.3. Toronto: CSA.
CSA (Canadian Standards Association). 2012. Design and construction of building structures with fiber reinforced polymers. CAN/CSA S806. Toronto: CSA.
CSA (Canadian Standards Association). 2015. Specification for fiber reinforced polymers. CAN/CSA S807. Toronto: CSA.
Desayi, P., and S. Krishnan. 1964. “Equation for stress–strain curve of the concrete.” ACI J. 61 (3): 345–350.
Dulude, C., M. Hassan, E. Ahmed, and B. Benmokrane. 2013. “Punching shear behavior of flat slabs reinforced with glass fiber-reinforced polymer bars.” ACI Struct. J. 110 (5): 723–734.
El-Gendy, M., and E. El-Salakawy. 2016. “Effect of shear studs and high moments on punching behavior of GFRP-RC slab-column edge connections.” J. Compos. Constr. 20 (4): 04016007. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000668.
Gorji, M. S. 2009. “Analysis of FRP strengthened reinforced concrete beams using energy variation method.” World Appl. Sci. J. 6 (1): 105–111.
Gouda, A., and E. El-Salakawy. 2016. “Behavior of GFRP-RC interior slab-column connections with shear studs and high-moment transfer.” J. Compos. Constr. 20 (4): 04016005. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000663.
Hassan, M., E. A. Ahmed, and B. Benmokrane. 2013a. “Punching-shear strength of GFRP-reinforced concrete flat slabs.” Can. J. Civ. Eng. 40 (10): 951–960. https://doi.org/10.1139/cjce-2012-0177.
Hassan, M., E. A. Ahmed, and B. Benmokrane. 2013b. “Punching-shear strength of normal and high-strength two-way concrete slabs reinforced with GFRP bars.” J. Compos. Constr. 17 (6): 04013003. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000424.
Hassan, M., E. A. Ahmed, and B. Benmokrane. 2014. “Punching-shear design equation for two-way concrete slabs reinforced with FRP bars and stirrups.” Constr. Build. Mater. 66 (Sep): 522–532. https://doi.org/10.1016/j.conbuildmat.2014.04.036.
Hassan, M., E. A. Ahmed, and B. Benmokrane. 2015. “Punching shear behavior of two-way slabs reinforced with FRP shear reinforcement.” J. Compos. Constr. 19 (1): 04014030. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000493.
Hassan, M., A. Fam, B. Benmokrane, and E. Ferrier. 2017. “Effect of column size and reinforcement ratio on shear strength of glass fiber-reinforced polymer reinforced concrete two-way slabs.” ACI Struct. J. 114 (4): 937–950. https://doi.org/10.14359/51689869.
Kachlakev, D., T. Miller, S. Yim, K. Chansawat, and T. Potisuk. 2001. Finite element modeling of reinforced concrete structures strengthened with FRP laminates. Salem, OR: Oregon Dept. of Transportation.
Lee, J. H., Y. S. Yoon, and D. Mitchell. 2009. “Improving punching shear behavior of glass fiber-reinforced polymer reinforced slabs.” ACI Struct. J. 106 (4): 427–434.
Lips, S., M. Ruiz, and A. Muttoni. 2012. “Experimental investigation on punching strength and deformation capacity of shear-reinforced slabs.” ACI Struct. J. 109 (6): 889–900.
Megally, S., and A. Ghali. 2000. “Seismic behavior of slab-column connections.” Can. J. Civ. Eng. 27 (1): 84–100. https://doi.org/10.1139/l99-052.
Mostafa, A., and E. El-Salakawy. 2018. “Behavior of GFRP-RC slab–column edge connections with high-strength concrete and shear reinforcement.” J. Compos. Constr. 22 (2): 04018001. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000831.
Mostofinejad, D., and S. B. Talaeitaba. 2006. “Finite element modeling of RC connections strengthened with FRP laminates.” Iran. J. Sci. Technol. Trans. B Eng. 30 (B1): 21–30.
NBCC (National Research Council of Canada). 2015. National building code of Canada. Ottawa: NBCC.
Özcan, D. M., A. Bayraktar, A. Sahin, T. Haktanir, and T. Türker. 2009. “Experimental and finite element analysis on the steel fiber-reinforced concrete (SFRC) beams ultimate behavior.” Constr. Build. Mater. 23 (2): 1064–1077. https://doi.org/10.1016/j.conbuildmat.2008.05.010.
Pultrall Inc. 2016. “V-ROD®, technical data sheets.” Accessed August 1, 2019. http://www.vrod.ca/en/downloads.asp.
Wolanski, A. J. 2004. “Flexural behavior of reinforced and prestressed concrete beams using finite element analysis.” M.Sc. thesis, Dept. of Civil, Construction and Environmental Engineering, Marquette Univ.
Zaghloul, A. 2007. “Punching shear strength of interior and edge column-slab connections in CFRP reinforced flat plate structures transferring shear and moment.” Ph.D. thesis, Dept. of Civil and Environmental Engineering, Carleton Univ.
Zhang, Q. 2004. “Finite element application to slab-column connections reinforced with glass fiber-reinforced polymers.” M.Sc. thesis, Faculty of Engineering, Memorial Univ. of Newfoundland.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Feb 11, 2019
Accepted: Oct 2, 2019
Published online: Feb 26, 2020
Published in print: May 1, 2020
Discussion open until: Jul 26, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.