Lateral Behavior of Traditional Chinese Timber-Frames Strengthened with Shape-Memory Alloy: Experiments and Analytical Model
Publication: Journal of Structural Engineering
Volume 146, Issue 6
Abstract
This study presents the test results of three specimens of traditional Chinese timber frames (TCTFs) with two types of column heights and two types of vertical loads. The specimens were initially loaded to damage, then strengthened with different numbers of shape memory alloy (SMA) wires and retested. The lateral performance, such as failure modes, envelop curves, stiffness degradation, and energy consumption, was analyzed to evaluate the SMA strengthening effects. Results showed that the lateral bearing capacity, stiffness, and energy consumption of the strengthened specimens were evidently improved, and even exceeded the undamaged level when relatively larger displacements were imposed. An analytical model for frames jointed by semirigid mortise–tenon and hinged column-foot joints (SHFs) was proposed. Lateral load-displacement responses of both the strengthened and unstrengthened specimens were predicted by the model, and good consistency was obtained compared with the test results. The influence of column heights, vertical loads, strengthening degree, and frame spans on lateral behavior of TCTFs also were evaluated through both experiments and parametric studies. This work provides a valuable reference for the restoration of historic timber structures.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors of this paper gratefully acknowledge the National Key Research and Development Program of China (2017YFC0703507), the funding support received from the National Natural Science Foundation of China (Grant No. 51878550), the National Key R&D Program of China (Grant No. 2018YFD1100404), and the Project of the Education Department of Shaanxi Provincial Government of China (18JS066).
References
Bedon, C., M. Fragiacomo, C. Amadio, and C. Sadoch. 2015. “Experimental study and numerical investigation of Blockhaus shear walls subjected to in-plane seismic loads.” J. Struct. Eng. 141 (4): 04014118. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001065.
Branco, J. M., M. Piazza, and P. J. S. Cruz. 2011. “Experimental evaluation of different strengthening techniques of traditional timber connections.” Eng. Struct. 33 (8): 2259–2270. https://doi.org/10.1016/j.engstruct.2011.04.002.
Brites, R. D., P. B. Lourenco, and J. S. Machado. 2012. “A semi-destructive tension method for evaluating the strength and stiffness of clear wood zones of structural timber elements in-service.” Constr. Build. Mater. 34 (Sep): 136–144. https://doi.org/10.1016/j.conbuildmat.2012.02.041.
Chen, C. C., H. X. Qiu, and Y. Lu. 2016. “Flexural behaviour of timber dovetail mortise-tenon joints.” Constr. Build. Mater. 112 (Jun): 366–377. https://doi.org/10.1016/j.conbuildmat.2016.02.074.
China Architecture and Building Press. 1992. Technical code for maintenance and strengthening of ancient timber buildings. GB 50165. Beijing: China Architecture and Building Press.
Chun, Q., Z. Meng, and Y. D. Han. 2017. “Research on mechanical properties of main joints of Chinese traditional timber buildings with the type of post-and-lintel construction.” Int. J. Archit. Heritage 11 (2): 247–260. https://doi.org/10.1080/15583058.2016.1204487.
Chun, Q., Z. Yue, and J. Pan. 2011. “Experimental study on seismic characteristics of typical mortise-tenon joints of Chinese southern traditional timber frame buildings.” Sci. China Technol. Sci. 54 (9): 2404–2411. https://doi.org/10.1007/s11431-011-4448-3.
Cortés-Puentes, W. L., and D. Palermo. 2018. “Seismic retrofit of concrete shear walls with SMA tension braces.” J. Struct. Eng. 144 (2): 04017200. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001936.
D’Ayala, D. F., and P. H. Tsai. 2008. “Seismic vulnerability of historic Dieh-Dou timber structures in Taiwan.” Eng. Struct. 30 (8): 2101–2113. https://doi.org/10.1016/j.engstruct.2007.11.007.
Eckelman, C. A., and S. K. Suddarth. 1969. “Analysis and design of furniture frames.” Wood Sci. Technol. 3 (3): 239–255. https://doi.org/10.1007/BF00367215.
Fang, D. P., S. Iwasaki, M. H. Yu, Q. P. Shen, Y. Miyamoto, and H. Hikosaka. 2001. “Ancient Chinese timber architecture. I: Experimental study.” J. Struct. Eng. 127 (11): 1348–1357. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:11(1348).
Guan, Z. W., A. Kitamori, and K. Komatsu. 2008. “Experimental study and finite element modelling of Japanese “Nuki” joints-Part one: Initial stress states subjected to different wedge configurations.” Eng. Struct. 30 (7): 2032–2040. https://doi.org/10.1016/j.engstruct.2008.01.003.
Hajdarević, S., and S. Martinović. 2014. “Effect of tenon length on flexibility of mortise and tenon joint.” Procedia Eng. 69 (Jan): 678–685. https://doi.org/10.1016/j.proeng.2014.03.042.
He, J. X., J. Wang, and Q. S. Yang. 2017. “Mechanical property of column footing joint in traditional wooden structure by quasi-static test.” J. Build. Struct. 38 (8): 141–149.
Huang, H. Y., W. S. Chang, and K. Chen. 2019. “Study of SMA-dowelled timber connection reinforced by densified veneer wood under cyclic loading.” In Vol. of 275 Proc., MATEC Web of Conf., edited by H. Li et al., 426. Red Hook, NY: Curran Associates.
ISO. 2003. Timber structures-joints made with mechanical fasteners quasi static reversed cyclic test method. ISO 16670. Geneva: ISO.
JGJ. 2015. Specification of testing methods for earthquake resistant building. JGJ 101/T101. Beijing: China Architecture and Building Press.
King, W. S., J. Y. R. Yen, and Y. A. N. Yen. 1996. “Joint characteristics of traditional Chinese wooden frames.” Eng. Struct. 18 (8): 635–644. https://doi.org/10.1016/0141-0296(96)00203-9.
Kishi, N., and W. F. Chen. 1990. “Moment-rotation relations of semi-rigid connections with angles.” J. Struct. Eng. 116 (7): 1813–1834. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:7(1813).
Kishi, N., W. F. Chen, Y. Goto, and M. Komuro. 1998. “Effective length factor of columns in flexibly jointed and braced frames.” J. Constr. Steel Res. 47 (1–2): 93–118. https://doi.org/10.1016/S0143-974X(98)80104-1.
Li, J. 1950. Yingzao Fashi (Construction method). Kaifeng, China: Royal Press.
Li, X. W., J. H. Zhao, G. W. Ma, and W. Chen. 2015a. “Experimental study on the seismic performance of a double-span traditional timber frame.” Eng. Struct. 98 (Sep): 141–150. https://doi.org/10.1016/j.engstruct.2015.04.031.
Li, X. W., J. H. Zhao, G. W. Ma, and S. H. Huang. 2015b. “Experimental study on the traditional timber mortise-tenon joints.” Adv. Struct. Eng. 18 (12): 2089–2102. https://doi.org/10.1260/1369-4332.18.12.2089.
Liang, S. 1984. A pictorical history of Chinese architecture. Cambridge, MA: MIT Press.
Ma, B. J. 1991. Wood construction techniques of Chinese ancient architecture. Beijing: Science Press.
Machado, J. S., M. Riggio, and D. F. D’Ayala. 2015. “Assessment of structural timber members by non- and semi-destructive methods.” Constr. Build. Mater. 101 (Dec): 1155–1156. https://doi.org/10.1016/j.conbuildmat.2015.11.032.
Oudah, F., and R. El-Hacha. 2017. “Joint performance in concrete beam-column connections reinforced using SMA smart material.” Eng. Struct. 151 (Nov): 745–760. https://doi.org/10.1016/j.engstruct.2017.08.054.
Poletti, E., G. Vasconcelos, J. M. Branco, and A. M. Koukouviki. 2016. “Performance evaluation of traditional timber joints under cyclic loading and their influence on the seismic response of timber frame structures.” Constr. Build. Mater. 127 (Nov): 321–334. https://doi.org/10.1016/j.conbuildmat.2016.09.122.
Qiao, G. F., T. Y. Li, and C. Y. Frank. 2016. “Assessment and retrofitting solutions for an historical wooden pavilion in China.” Constr. Build. Mater. 105 (Feb): 435–447. https://doi.org/10.1016/j.conbuildmat.2015.12.107.
Qiu, C. X., and S. Zhu. 2017. “Performance-based seismic design of self-centering steel frames with SMA based braces.” Eng. Struct. 130 (Jan): 67–82. https://doi.org/10.1016/j.engstruct.2016.09.051.
Song, X. B., K. Li, E. Crayssac, and Y. J. Wu. 2018. “Lateral performance of mortise-tenon jointed traditional timber frames with wood panel infill.” J. Struct. Eng. 161 (Apr): 223–230. https://doi.org/10.1016/j.engstruct.2018.02.022.
Standards Press of China. 2009. Physical and mechanical tests of wood. GB 1927∼GB1943. Beijing: Chinese Academy of Forestry.
van de Lindt, J. W., and A. Potts. 2008. “Shake table testing of a superelastic shape memory alloy response modification device in a wood shear wall.” J. Struct. Eng. 134 (8): 1343–1352. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:8(1343).
Wang, J., J. X. He, N. Yang, and Q. S. Yang. 2017. “Study on aseismic characteristics of Tibetan ancient timber structure.” Adv. Mater. Sci. Eng. 2017: 15. https://doi.org/10.1155/2017/8186768.
Wang, T. 1992. Static mechanics of ancient timber structures. Beijing: Cultural Relics Publishing House.
Xie, Q. F., L. Wang, L. P. Zhang, W. Xiang, and W. B. Hu. 2020. “Rotational behaviours of fork-column Dou-Gong: Experimental tests and hysteresis model.” J. Perform. Constr. Facil. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001426.
Xie, Q. F., L. Wang, P. J. Zheng, L. P. Zhang, and W. B. Hu. 2017. “Rotational behavior of degraded traditional mortise-tenon joints: Experimental tests and hysteretic model.” Int. J. Archit. Heritage 1 (Nov): 125–136. https://doi.org/10.1080/15583058.2017.1390629.
Xie, Q. F., L. P. Zhang, S. Li, W. J. Zhou, and L. Wang. 2018. “Cyclic behavior of Chinese ancient wooden frame with mortise-tenon joints: Friction constitutive model and finite element modelling.” J. Wood Sci. 64 (1): 40–51. https://doi.org/10.1007/s10086-017-1669-5.
Xie, Q. F., L. P. Zhang, L. Wang, W. J. Zhou, and T. G. Zhou. 2019a. “Cyclical behavior of timber mortise-tenon joints strengthened with shape memory alloy: Experiments and moment-rotation model.” Int. J. Archit. Heritage 13 (8): 1209–1222. https://doi.org/10.1080/15583058.2018.1501116.
Xie, Q. F., L. P. Zhang, L. Wang, W. J. Zhou, and T. G. Zhou. 2019b. “Lateral performance of traditional Chinese timber frames: Experiments and analytical model.” Eng. Struct. 186 (May): 446–455. https://doi.org/10.1016/j.engstruct.2019.02.038.
Xu, M. G., and H. X. Qiu. 2010. “Experimental study on seismic behavior of mortise-tenon joints in Chinese ancient timber buildings.” [In Chinese.] J. Build. Struct. S2: 345–349.
Ying, H. C., and Y. Li. 2005. “Modeling timber moment connection under reversed cyclic loading.” J. Struct. Eng. 131 (11): 1757–1763. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:11(1757).
Yue, Z. 2014. “Traditional Chinese wood structure joints with an experiment considering regional differences.” Int. J. Archit. Heritage 8 (2): 224–246. https://doi.org/10.1080/15583058.2012.688179.
Zhou, Q., and W. Yan. 2015. “Aseismic behaviors of ancient Chinese structures strengthened by different methods.” Stud. Conserv. 60 (6): 384–392. https://doi.org/10.1179/2047058414Y.0000000137.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Mar 19, 2019
Accepted: Sep 16, 2019
Published online: Mar 19, 2020
Published in print: Jun 1, 2020
Discussion open until: Aug 19, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.