Prestress Loss Diagnostics in Pretensioned Concrete Structures with Corrosive Cracking
Publication: Journal of Structural Engineering
Volume 146, Issue 3
Abstract
Concrete cracking induced by strand corrosion can degrade bond strength and lead to prestress loss. A novel model is proposed to predict corrosion-induced prestress loss in pretensioned concrete structures. The coupling effects of concrete cracking and bond degradation are incorporated into the model. An experimental study is conducted to evaluate the effective prestress in eight corroded pretensioned concrete beams under various stress levels. Experimental results are employed to validate the proposed model. Results demonstrate that the proposed model can accurately predict prestress loss in corroded pretensioned concrete structures. Prestress loss depends on the corrosion degree. Corrosion-induced concrete cracking may not degrade bond strength and effective prestress unless corrosion loss exceeds 6.6%. As corrosion further progresses, bond strength and effective prestress decrease monotonically and then reduce to zero when corrosion loss reaches 34.0%.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was conducted with financial support from the State Key Development Program for Basic Research of China (Grant No. 2015CB057705), and the National Natural Science Foundation of China (Grant Nos. 51678069, 51708477). Their support is gratefully acknowledged.
References
AASHTO. 2010. AASHTO-LRFD bridge design specifications. Washington, DC: AASHTO.
Abdelatif, A. O., J. S. Owen, and M. F. M. Hussein. 2015. “Modelling the prestress transfer in pre-tensioned concrete elements.” Finite Elem. Anal. Des. 94 (Feb): 47–63. https://doi.org/10.1016/j.finel.2014.09.007.
ACI (American Concrete Institute). 2011. Building code requirements for structural concrete and commentary. ACI 318M. Farmington Hills, MI: ACI.
ASTM. 2011. Standard practice for preparing, cleaning, and evaluating corrosion test specimens. ASTM G1-03. West Conshohocken, PA: ASTM.
Bhargava, K., A. K. Ghosh, Y. Mori, and S. Ramanujam. 2006. “Model for cover cracking due to rebar corrosion in RC structures.” Eng. Struct. 28 (8): 1093–1109. https://doi.org/10.1016/j.engstruct.2005.11.014.
Biondini, F., and D. M. Frangopol. 2016. “Life-cycle performance of deteriorating structural systems under uncertainty: Review.” J. Struct. Eng. 142 (9): F4016001. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001544.
Briere, V., K. A. Harries, J. Kasan, and C. Hager. 2013. “Dilation behavior of seven-wire prestressing strand—The Hoyer effect.” Constr. Build. Mater. 40 (Mar): 650–658. https://doi.org/10.1016/j.conbuildmat.2012.11.064.
Caro, L. A., J. R. Martí-Vargas, and P. Serna. 2013. “Prestress losses evaluation in prestressed concrete prismatic specimens.” Eng. Struct. 48 (Mar): 704–715. https://doi.org/10.1016/j.engstruct.2012.11.038.
Castel, A., D. Coronelli, N. A. Vu, and R. François. 2011. “Structural response of corroded, unbonded posttensioned beams.” J. Struct. Eng. 137 (7): 761–771. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000315.
Cavell, D. G., and P. Waldron. 2001. “A residual strength model for deteriorating post-tensioned concrete bridges.” Comput. Struct. 79 (4): 361–373. https://doi.org/10.1016/S0045-7949(00)00150-4.
CEB-FIP (Comité Euro-International du Béton-Fédération International de la Précontrainte). 2010. “Model code 2010: Final draft.” In Model code prepared by special activity group 5. Lausanne, Switzerland: CEB-FIP.
Chen, H. P., and J. Nepal. 2016. “Analytical model for residual bond strength of corroded reinforcement in concrete structures.” J. Eng. Mech. 142 (2): 04015079. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000997.
Collins, M., and D. Mitchell. 1991. Prestressed concrete structure. Englewood Cliffs, NJ: Prentice Hall.
Coronelli, D. 2002. “Corrosion cracking and bond strength modeling for corroded bars in reinforced concrete.” ACI Struct. J. 99 (3): 267–276.
Dai, L., L. Wang, J. Zhang, and X. Zhang. 2016. “A global model for corrosion-induced cracking in prestressed concrete structures.” Eng. Fail. Anal. 62 (Apr): 263–275. https://doi.org/10.1016/j.engfailanal.2016.01.013.
Dang, C. N., R. W. Floyd, G. S. Prinz, and W. M. Hale. 2016. “Determination of bond stress distribution coefficient by maximum likelihood method.” J. Struct. Eng. 142 (5): 04016003. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001460.
EI Maaddawy, T., and K. Soudki. 2003. “Effectiveness of impressed current technique to simulate corrosion of steel reinforcement in concrete.” J. Mater. Civ. Eng. 15 (1): 41–47. https://doi.org/10.1061/(ASCE)0899-1561(2003)15:1(41).
El-Tawil, S., C. Ogunc, A. Okeil, and M. Shahawy. 2001. “Static and fatigue analyses of RC beams strengthened with CFRP laminates.” J. Compos. Constr. 5 (4): 258–267. https://doi.org/10.1061/(ASCE)1090-0268(2001)5:4(258).
General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China. 2010. Metallic materials—Tensile testing—Part 1: Method of test at room temperature. [In Chinese.] GB/T 228.1. Beijing: Certified Information Systems Auditor.
Han, S. J., D. H. Lee, S. H. Cho, S. B. Ka, and K. S. Kim. 2016. “Estimation of transfer lengths in precast pretensioned concrete members based on a modified thick-walled cylinder model.” Struct. Concr. 17 (1): 52–62. https://doi.org/10.1002/suco.201500049.
Han, W., J. Wu, C. S. Cai, and S. Chen. 2015. “Characteristics and dynamic impact of overloaded extra heavy trucks on typical highway bridges.” J. Bridge Eng. 20 (2): 05014011. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000666.
Khan, I., R. François, and A. Castel. 2014. “Prediction of reinforcement corrosion using corrosion induced cracks width in corroded reinforced concrete beams.” Cem. Concr. Res. 56 (Feb): 84–96. https://doi.org/10.1016/j.cemconres.2013.11.006.
Kottari, A. K., and P. B. Shing. 2014. “Estimation of long-term prestress losses in post-tensioned girders.” ACI Struct. J. 111 (5): 1091–1100. https://doi.org/10.14359/51686921.
Li, C. Q., and S. T. Yang. 2011. “Prediction of concrete crack width under combined reinforcement corrosion and applied load.” J. Eng. Mech. 137 (11): 722–731. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000289.
Li, F., Y. Yuan, and C. Q. Li. 2011. “Corrosion propagation of prestressing steel strands in concrete subject to chloride attack.” Constr. Build. Mater. 25 (10): 3878–3885. https://doi.org/10.1016/j.conbuildmat.2011.04.011.
Lim, S., M. Akiyama, and D. M. Frangopol. 2016. “Assessment of the structural performance of corrosion-affected RC members based on experimental study and probabilistic modeling.” Eng. Struct. 127 (Nov): 189–205. https://doi.org/10.1016/j.engstruct.2016.08.040.
Mangual, J., M. ElBatanouny, P. Ziehl, and F. Matta. 2013. “Corrosion damage quantification of prestressing strands using acoustic emission.” J. Mater. Civ. Eng. 25 (9): 1326–1334. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000669.
Ministry of Housing and Urban-Rural Development of the People’s Republic of China. 2002. Standard for test method of performance on ordinary fresh concrete. [In Chinese.] GB/T 50081-2002. Beijing: Architecture and Building Press.
Osborn, G. P., P. J. Barr, D. A. Petty, M. W. Halling, and T. R. Brackus. 2012. “Residual prestress forces and shear capacity of salvaged prestressed concrete bridge girders.” J. Bridge Eng. 17 (2): 302–309. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000212.
Pantazopoulou, S. J., and K. D. Papoulia. 2001. “Modeling cover-cracking due to reinforcement corrosion in RC structures.” J. Eng. Mech. 127 (4): 342–351. https://doi.org/10.1061/(ASCE)0733-9399(2001)127:4(342).
PCI (Precast/Prestressed Concrete Institute) and Industry Handbook Committee. 2010. PCI design handbook—Precast/prestressed concrete. 7th ed. Chicago: Prestressed Concrete Institute.
Pillai, R. G., D. Trejo, P. Gardoni, M. B. D. Hueste, and K. Reinschmidt. 2014. “Time-variant flexural reliability of posttensioned, segmental concrete bridges exposed to corrosive environments.” J. Struct. Eng. 140 (8): A4014018. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000991.
Ramirez-Garcia, A. T., C. N. Dang, W. M. Hale, and J. R. Martí-Vargas. 2017. “A higher-order equation for modeling strand bond in pretensioned concrete beams.” Eng. Struct. 131 (Jan): 345–361. https://doi.org/10.1016/j.engstruct.2016.10.050.
Val, D. V., L. Chernin, and M. G. Stewart. 2009. “Experimental and numerical investigation of corrosion-induced cover cracking in reinforced concrete structures.” J. Struct. Eng. 135 (4): 376–385. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:4(376).
Vu, N. A., A. Castel, and R. François. 2010. “Response of post-tensioned concrete beams with unbonded tendons including serviceability and ultimate state.” Eng. Struct. 32 (2): 556–569. https://doi.org/10.1016/j.engstruct.2009.11.001.
Wang, L., L. Dai, H. Bian, Y. Ma, and J. Zhang. 2019. “Concrete cracking prediction under combined prestress and strand corrosion.” Struct. Infrastruct. Eng. 15 (3): 285–295. https://doi.org/10.1080/15732479.2018.1550519.
Wang, L., X. Zhang, J. Zhang, J. Yi, and Y. Liu. 2016. “Simplified model for corrosion-induced bond degradation between steel strand and concrete.” J. Mater. Civ. Eng. 29 (4): 04016257. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001784.
Wang, X., and X. Liu. 2006. “Bond strength modeling for corroded reinforcements.” Constr. Build. Mater. 20 (3): 177–186. https://doi.org/10.1016/j.conbuildmat.2005.01.015.
Ward, D. B., C. N. Dang, R. W. Floyd, and W. M. Hale. 2016. “Prestress losses of double-tee girders cast with lightweight self-consolidating concrete.” J. Build. Eng. 7 (Sep): 133–142. https://doi.org/10.1016/j.jobe.2016.06.004.
Yuan, Y., Y. Ji, and S. P. Shah. 2007. “Comparison of two accelerated corrosion techniques for concrete structures.” ACI Struct. J. 104 (3): 344–347. https://doi.org/10.14359/18624.
Zhang, W., Z. Ye, X. Gu, X. Liu, and S. Li. 2017. “Assessment of fatigue life for corroded reinforced concrete beams under uniaxial bending.” J. Struct. Eng. 143 (7): 04017048. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001778.
Zhang, W., and H. Yuan. 2014. “Corrosion fatigue effects on life estimation of deteriorated bridges under vehicle impacts.” Eng. Struct. 71 (Jul): 128–136. https://doi.org/10.1016/j.engstruct.2014.04.004.
Zhao, Y., and W. Jin. 2006. “Modeling the amount of steel corrosion at the cracking of concrete cover.” Adv. Struct. Eng. 9 (5): 687–696. https://doi.org/10.1260/136943306778827556.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Jul 28, 2018
Accepted: Aug 13, 2019
Published online: Jan 13, 2020
Published in print: Mar 1, 2020
Discussion open until: Jun 13, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.