Enhancing Toughness of Medium-Density Fiberboard by Mimicking Nacreous Structures through Advanced Manufacturing Techniques
Publication: Journal of Structural Engineering
Volume 146, Issue 3
Abstract
Medium-density fiberboard (MDF) is widely used in building construction. Due to its inherent brittleness, MDF is typically employed in nonstructural components such as partition walls. Many structures found in nature are also composed of brittle materials, but their unique structural arrangements provide superior mechanical performance to traditional engineering construction. An excellent example is nacre, a tough component of the armor system of mollusk seashells. The masonrylike structure of nacre is mainly composed of a brittle ceramic mineral, but its toughness is several orders of magnitude greater than aragonite. Herein, MDF is toughened using principles inspired by nacre. Several of the structural features of nacre are mimicked, namely (1) the polygonal bricks and reinforcing bridges between them to control strength, and (2) the highly deformable polymeric mortar to control toughness. The process of manufacturing the nacrelike MDF composite panel is automated using a computer-generated Voronoi geometry and laser cutting. The performance of the nacrelike panel is experimentally assessed under quasi-static tensile loading. The bridges between the bricks controlled the strength of the specimen, and the crack tortuosity between the oblique edges of the polygonal bricks and the ductile polymeric adhesive enhanced its toughness. The improved strength and toughness of the MDF should inspire other studies to broaden the application of biomimetic composites to extreme environments requiring strong and tough materials.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was funded through the ARC Discovery Project DP170100851.
References
Barthelat, F. 2010. “Nacre from mollusk shells: A model for high-performance structural materials.” Bioinspiration Biomimetics 5 (3): 035001. https://doi.org/10.1088/1748-3182/5/3/035001.
Chen, X., H. T. Y. Yang, J. Shan, and P. K. Hansma. 2016. “Bio-inspired passive optimized base-isolation system for seismic mitigation of building structures.” J. Eng. Mech. 142 (1): 04015061. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000971.
Constantz, B. R., M. A. Bewernitz, C. L. Camire, S. H. Kang, J. Schneider, and R. R. Wade. 2015. “Bioinspired concrete.” In Biotechnologies and biomimetics for civil engineering, edited by F. P. Torgal, J. A. Labrincha, M. Diamanti, C. P. Yu, and H. Lee. New York: Springer.
de Berg, M., O. Cheong, M. van Kreveld, and M. Overmars. 2008. “Voronoi diagrams.” In Computational geometry: Algorithms and applications, 147–170. Berlin: Springer-Verlag.
Dutta, A., A. Tekalur, and M. Miklavcic. 2013. “Optimal overlap length in staggered architecture composites under dynamic loading conditions.” J. Mech. Phys. Solids 61 (1): 145–160. https://doi.org/10.1016/j.jmps.2012.08.005.
Dutta, A., and S. A. Tekalur. 2014. “Crack tortuosity in the nacreous layer—Topological dependence and biomimetic design guideline.” Internal J. Solids Struct. 51 (2): 325–335. https://doi.org/10.1016/j.ijsolstr.2013.10.006.
Epilog. 2017. “Epilog laser engraving, cutting and marking machines.” Accessed April 1, 2018. https://www.epiloglaser.com.au/?gclid=EAIaIQobChMI7Y7g_oyV2AIVASUrCh1g3wa3EAAYAiAAEgKpKvD_BwE.
Flores-Johnson, E. A., L. Shen, I. Guiamatsia, and G. D. Nguyen. 2014. “Numerical investigation of the impact behaviour of bioinspired nacre-like aluminium composite plates.” Compos. Sci. Technol. 96 (May): 13–22. https://doi.org/10.1016/j.compscitech.2014.03.001.
Ghazlan, A., T. D. Ngo, and P. Tran. 2015. “Influence of interfacial geometry on the energy absorption capacity and load sharing mechanisms of nacreous composite shells.” Compos. Struct. 132 (Nov): 299–309. https://doi.org/10.1016/j.compstruct.2015.05.045.
Ghazlan, A., T. D. Ngo, and P. Tran. 2016. “Three-dimensional Voronoi model of a nacre-mimetic composite structure under impulsive loading.” Compos. Struct. 153 (Oct): 278–296. https://doi.org/10.1016/j.compstruct.2016.06.020.
Ghazlan, A., T. D. Ngo, and P. Tran. 2017. “Influence of geometric and material parameters on the behavior of nacreous composites under quasi-static loading.” Compos. Struct. 183 (Jan): 457–482. https://doi.org/10.1016/j.compstruct.2017.05.015.
Gibson, L. J. 1985. “The mechanical behaviour of cancellous bone.” J. Biomech. 18 (5): 317–328. https://doi.org/10.1016/0021-9290(85)90287-8.
Imbalzano, G., S. Linforth, T. D. Ngo, P. V. S. Lee, and P. Tran. 2018. “Blast resistance of auxetic and honeycomb sandwich panels: Comparisons and parametric designs.” Compos. Struct. 183 (Jan): 242–261. https://doi.org/10.1016/j.compstruct.2017.03.018.
Imbalzano, G., P. Tran, T. D. Ngo, and P. V. S. Lee. 2016. “A numerical study of auxetic composite panels under blast loadings.” Compos. Struct. 135 (Jan): 339–352. https://doi.org/10.1016/j.compstruct.2015.09.038.
Katti, D. R., S. M. Pradhan, and K. S. Katti. 2004. “Modeling the organic-inorganic interfacial nanoasperities in a model bio-nanocomposite, nacre.” Rev. Adv. Mater. Sci. 6 (2): 162–168.
Katti, K. S., and D. R. Katti. 2006. “Why is nacre so tough and strong?” Mater. Sci. Eng., C 26 (8): 1317–1324. https://doi.org/10.1016/j.msec.2005.08.013.
Katti, K. S., D. R. Katti, S. M. Pradhan, and A. Bhosle. 2005. “Platelet interlocks are the key to toughness and strength in nacre.” J. Mater. Res. 20 (5): 1097–1100. https://doi.org/10.1557/JMR.2005.0171.
Kim, Y., C. Kim, and R. Langari. 2010. “Novel bio-inspired smart control for hazard mitigation of civil structures.” Smart Mater. Struct. 19 (11): 1–10. https://doi.org/10.1088/0964-1726/19/11/115009.
Kotha, S. P., Y. Li, and N. Guzelsu. 2001. “Micromechanical model of nacre tested in tension.” J. Mater. Sci. 36 (8): 2001–2007. https://doi.org/10.1023/A:1017526830874.
Kwon, I. Y., H. T. Yang, P. K. Hansma, and C. J. Randall. 2017. “Bioinspired tuned mass damper for mitigation of wind-induced building excitation.” J. Struct. Eng. 143 (10): 04017142. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001881.
Lopez, M. I., P. E. Meza Martinez, and M. A. Meyers. 2014. “Organic interlamellar layers, mesolayers and mineral nanobridges: Contribution to strength in abalone (Haliotis rufescence) nacre.” Acta Biomater. 10 (5): 2056–2064. https://doi.org/10.1016/j.actbio.2013.12.016.
Martikainen, L., A. Walther, J. Seitsonen, L. Berglund, and O. Ikkala. 2013. “Deoxyguanosine phosphate mediated sacrificial bonds promote synergistic mechanical properties in nacre-mimetic nanocomposites.” Biomacromolecules 14 (8): 2531–2535. https://doi.org/10.1021/bm400056c.
MathWorks. 2015. “Voronoi diagram.” Accessed April 4, 2018. https://au.mathworks.com/help/matlab/ref/voronoi.html.
Meyers, M. A., P. Y. Chen, A. Y. M. Lin, and Y. Seki. 2008. “Biological materials: Structure and mechanical properties.” Prog. Mater Sci. 53 (1): 1–206. https://doi.org/10.1016/j.pmatsci.2007.05.002.
Meyers, M. A., C. T. Lim, A. Li, B. R. Hairul Nizam, E. P. S. Tan, Y. Seki, and J. McKittrick. 2009. “The role of the intertile layer in abalone nacre.” Mater. Sci. Eng., C 29 (8): 2398–2410. https://doi.org/10.1016/j.msec.2009.07.005.
Mirkhalaf, M., A. K. Dastjerdi, and F. Barthelat. 2014. “Overcoming the brittleness of glass through bio-inspiration and micro-architecture.” Nat. Commun. 5 (Jan): 1–9. https://doi.org/10.1038/ncomms4166.
Mohotti, D., M. Ali, T. Ngo, J. Lu, P. Mendis, and D. Ruan. 2013. “Out-of-plane impact resistance of aluminium plates subjected to low velocity impacts.” Mater. Des. 50 (Sep): 413–426. https://doi.org/10.1016/j.matdes.2013.03.023.
Mohotti, D., T. Ngo, S. N. Raman, M. Ali, and P. Mendis. 2014. “Plastic deformation of polyurea coated composite aluminium plates subjected to low velocity impact.” Mater. Des. 56 (Apr): 696–713. https://doi.org/10.1016/j.matdes.2013.11.063.
Ngo, T. D., A. Kashani, G. Imbalzano, and K. T. Q. Nguyen. 2018. “Additive manufacturing (3D printing): A review of materials, methods, applications and challenges.” Composites Part B 143 (Jun): 172–196. https://doi.org/10.1016/j.compositesb.2018.02.012.
Nguyen, T., A. Kashani, T. Ngo, and S. Bordas. 2019. “Deep neural network with high-order neuron for the prediction of foamed concrete strength.” Comput.-Aided Civ. Infrastruct. Eng. 34 (4): 316–332. https://doi.org/10.1111/mice.12422.
Pacheco-Torgal, F., and J. A. Labrincha. 2014. “Biotechnologies and bioinspired materials for the construction industry: An overview.” Int. J. Sustainable Eng. 7 (3): 235–244. https://doi.org/10.1080/19397038.2013.844741.
Palkovic, S. D., D. B. Brommer, K. Kupwade-Patil, A. Masic, and M. J. Buehler. 2016. “Roadmap across the mesoscale for durable and sustainable cement paste—A bioinspired approach.” Constr. Build. Mater. 115 (Jul): 13–31. https://doi.org/10.1016/j.conbuildmat.2016.04.020.
Raman, S. N., T. Ngo, P. Mendis, and T. Pham. 2012. “Elastomeric polymers for retrofitting of reinforced concrete structures against the explosive effects of blast.” Adv. Mater. Sci. Eng. 2012: 1–8. https://doi.org/10.1155/2012/754142.
Ren, X., R. Das, P. Tran, T. D. Ngo, and Y. M. Xie. 2018. “Auxetic metamaterials and structures: A review.” Smart Mater. Struct. 27 (2): 1–38. https://doi.org/10.1088/1361-665X/aaa61c.
Schaffer, T. E., et al. 1997. “Does abalone nacre form by heteroepitaxial nucleation or by growth through mineral bridges?” Chem. Mater. 9 (8): 1731–1740. https://doi.org/10.1021/cm9709986.
Sika. 2019. “Product datasheets.” Accessed April 1, 2018. https://aus.sika.com/en/solutions_products/document_library/product-datasheets.html.
Silva, M. J., and L. J. Gibson. 1997. “Modeling the mechanical behavior of vertebral trabecular bone: Effects of age-related changes in microstructure.” Bone 21 (2): 191–199. https://doi.org/10.1016/S8756-3282(97)00100-2.
Smith, B. L., T. E. Schaffer, M. Viani, J. B. Thompson, N. A. Frederick, J. Kindt, A. Belcher, G. D. Stucky, D. E. Morse, and P. K. Hansma. 1999. “Molecular mechanistic origin of the toughness of natural adhesives, fibres and composites.” Nature 399 (6738): 761–763. https://doi.org/10.1038/21607.
Soltan, D. G. 2014. “A bio-inspired cementitious composite for high energy absorption in infrastructural applications.” Blucher Mater. Sci. Proc. 1 (1): 1–4. https://doi.org/10.5151/matsci-mmfgm-014-f.
Sun, Y., Z. Yu, Z. Wang, and X. Liu. 2015. “Novel protective covering to enhance concrete resistance against projectile impact.” Constr. Build. Mater. 96 (Oct): 484–490. https://doi.org/10.1016/j.conbuildmat.2015.08.054.
Sutherland, I. E., and G. W. Hodgman. 1974. “Reentrant polygon clipping.” In Communications of the ACM, 32–42. New York: Association for Computing Machinery.
Tang, H., F. Barthelat, and H. D. Espinosa. 2007. “An elasto-viscoplastic interface model for investigating the constitutive behavior of nacre.” J. Mech. Phys. Solids 55 (7): 1410–1438. https://doi.org/10.1016/j.jmps.2006.12.009.
Torres, F. G., O. P. Troncoso, J. Diaz, and D. Arce. 2014. “Failure analysis of porcupine quills under axial compression reveals their mechanical response during buckling.” J. Mech. Behav. Biomed. Mater. 39 (Nov): 111–118. https://doi.org/10.1016/j.jmbbm.2014.07.017.
Tran, P., and T. Ngo. 2014. “Bio-inspired composite structures subjected to underwater impulsive loading.” Comput. Mater. Sci 82 (Feb): 134–139. https://doi.org/10.1016/j.commatsci.2013.09.033.
Tran, P., T. D. Ngo, A. Ghazlan, and D. Hui. 2017. “Bimaterial 3D printing and numerical analysis of bio-inspired composite structures under in-plane and transverse loadings.” Composites Part B 108 (Jan): 210–223. https://doi.org/10.1016/j.compositesb.2016.09.083.
Wegst, U. G. K., H. Bai, E. Saiz, A. P. Tomsia, and R. O. Ritchie. 2015. “Bioinspired structural materials.” Nat. Mater. 14 (1): 23–36. https://doi.org/10.1038/nmat4089.
Wei, X., T. Filleter, and H. D. Espinosa. 2015. “Statistical shear lag model—Unravelling the size effect in hierarchical composites.” Acta Biomater. 18 (May): 206–212. https://doi.org/10.1016/j.actbio.2015.01.040.
Wei, X., M. Naraghi, and H. D. Espinosa. 2012. “Optimal length scales emerging from shear load transfer in natural materials: Application to carbon-based nanocomposite design.” ACS Nano 6 (3): 2333–2344. https://doi.org/10.1021/nn204506d.
Wilbrink, D. V., M. Utz, R. O. Ritchie, and M. R. Begley. 2010. “Scaling of strength and ductility in bioinspired brick and mortar composites.” Appl. Phys. Lett. 97 (19): 1–3. https://doi.org/10.1063/1.3499294.
Yang, W., and J. McKittrick. 2013. “Separating the influence of the cortex and foam on the mechanical properties of porcupine quills.” Acta Biomater. 9 (11): 9065–9074. https://doi.org/10.1016/j.actbio.2013.07.004.
Zhang, N., S. Yang, L. Xiong, Y. Hong, and Y. Chen. 2016. “Nanoscale toughening mechanism of nacre tablet.” J. Mech. Behav. Biomed. Mater. 53 (Jan): 200–209. https://doi.org/10.1016/j.jmbbm.2015.08.020.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 146 • Issue 3 • March 2020
Copyright
©2020 American Society of Civil Engineers.
History
Received: Sep 27, 2018
Accepted: Aug 12, 2019
Published online: Jan 2, 2020
Published in print: Mar 1, 2020
Discussion open until: Jun 2, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.