Statistical Analysis of Flexural-Buckling-Resistance Models for High-Strength Steel Columns
Publication: Journal of Structural Engineering
Volume 146, Issue 2
Abstract
Flexural buckling is one of the main problems steel structures are faced with in ensuring an economic design. In Europe, the buckling resistance is calculated using an imperfection factor based on the section type, fabrication method, and steel grade. The current European design standards contain guidelines for the imperfection factor for sections made of steels with yield strength up to and including 700 MPa. However, the current design codes are based mainly on tests performed on steels with yield strength below 460 MPa. Therefore, the applicability of the methodology was reassessed. This paper reviewed the background documentation of the European flexural-buckling design methodology and discussed the current design practice described in the American National Standard. A total of 72 flexural-buckling experiments performed on cold-formed, hot-finished, and welded sections made of steel with yield strength in the range 690–960 MPa were collected and analyzed. Four models for estimating the resistance of high-strength steel struts subjected to pure compression were statistically evaluated based on the collected data. Finally, a recommendation for the estimation of flexural-buckling resistance of high-strength steel members is presented.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data and models used during the study appear in the published article. The code used during the study is available online (Seabold and Perktold 2010).
Acknowledgments
The authors acknowledge the support of the European Commission’s Framework Program “Horizon 2020,” through the Marie Skłodowska-Curie Innovative Training Networks (ITN) “AEOLUS4FUTURE—Efficient harvesting of the wind energy” (H2020-MSCA-ITN-2014: Grant Agreement No. 643167) for this research project.
References
AISC. 2016a. Code of standard practice for steel buildings and bridges. AISC 303. Chicago: AISC.
AISC. 2016b. Specification for structural steel buildings. AISC 360. Chicago: AISC.
Alriksson, S., and M. Henningsson. 2015. “Why aren’t advanced high-strength steels more widely used?: Stakeholder preferences and perceived barriers to new materials.” J. Ind. Ecol. 19 (4): 645–655. https://doi.org/10.1111/jiec.12212.
ASTM. 2018. Standard specification for structural steel for bridges. A709-18. West Conshohocken, PA: ASTM.
Baddoo, N. 2017. “Editorial.” Proc. Inst. Civ. Eng. Struct. Build. 170 (9): 619–620. https://doi.org/10.1680/jstbu.2017.170.9.619.
Ban, H., G. Shi, Y. Bai, Y. Shi, and Y. Wang. 2013a. “Residual stress of 460 MPa high strength steel welded i section: Experimental investigation and modeling.” Int. J. Steel Struct. 13 (4): 691–705. https://doi.org/10.1007/s13296-013-4010-1.
Ban, H., G. Shi, Y. Shi, and M. A. Bradford. 2013b. “Experimental investigation of the overall buckling behaviour of 960 MPa high strength steel columns.” J. Constr. Steel Res. 88: 256–266. https://doi.org/10.1016/j.jcsr.2013.05.015.
Beer, H., and G. Schulz. 1975. “The European column curves.” Constr. Métallique 3 (23): 385–398. https://doi.org/10.5169/seals-19828.
Boverket. 2007. Boverkets handbok om stålkonstruktioner, (Swedish regulations for steel structures). BSK 07. Karlskrona: Boverket.
Boverket. 2016. Boverkets konstruktionsregler, (application of the European construction standard). EKS 10. Karlskrona: Boverket (The Swedish National Board of Housing, Building and Planning).
CEN (European Committee for Standardization). 2005. Design of steel structures. 1-1: General rules and rules for buildings. Eurocode 3. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2006. Design of steel structures. 1-5: Plated structural elements. Eurocode 3. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2007. Design of steel structures. 1-12: Additional rules for the extension of EN 1993 up to steel grades S700. Eurocode 3. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2011. Execution of steel structures and aluminium structures. 2: Technical requirements for steel structures. EN 1090. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2018a. Design of steel structures. 1-1: General rules and rules for buildings: 2nd draft. Eurocode 3. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2018b. Execution of steel structures and aluminium structures. 2: Technical requirements for steel structures. EN 1090. Brussels, Belgium: CEN.
Clarin, M. 2004. “High strength steel: Local buckling and residual stresses.” Ph.D. thesis, Dept. of Civil, Mining and Environmental Engineering, Luleå Univ. of Technology.
Collin, P., and B. Johansson. 2005. “Eurocode for high strength steel and applications in construction.” In Super-High Strength Steels: 1st Int. Conf., 12. Rome: Associazione Italiana di Metallurgia.
ECCS (European Convention for Constructional Steelwork). 1976. Manual on stability of steel structures. Brussels, Belgium: ECCS.
Fukumoto, Y., and Y. Itoh. 1983. “Evaluation of multiple column curves using the experimental data-base approach.” J. Constr. Steel Res. 3 (3): 2–19. https://doi.org/10.1016/0143-974X(83)90002-0.
Jönsson, J., and T. C. Stan. 2017. “European column buckling curves and finite element modelling including high strength steels.” J. Constr. Steel Res. 128 (Jan): 136–151. https://doi.org/10.1016/j.jcsr.2016.08.013.
Khan, M., A. Paradowska, B. Uy, F. Mashiri, and Z. Tao. 2016. “Residual stresses in high strength steel welded box sections.” J. Constr. Steel Res. 116 (Jan): 55–64. https://doi.org/10.1016/j.jcsr.2015.08.033.
Khan, M., B. Uy, Z. Tao, and F. Mashiri. 2017. “Concentrically loaded slender square hollow and composite columns incorporating high strength properties.” Eng. Struct. 131 (Jan): 69–89. https://doi.org/10.1016/j.engstruct.2016.10.015.
Kim, D. K., C. H. Lee, K. H. Han, J. H. Kim, S. E. Lee, and H. B. Sim. 2014. “Strength and residual stress evaluation of stub columns fabricated from 800 MPa high-strength steel.” J. Constr. Steel Res. 102 (Nov): 111–120. https://doi.org/10.1016/j.jcsr.2014.07.007.
Kövesdi, B., and B. Somodi. 2017. “Modified Ayrton-Perry formula for flexural buckling of HSS welded box sections.” Ce/Papers 1 (2–3): 1199–1208. https://doi.org/10.1002/cepa.161.
Lagerqvist, O., and A. Olsson. 2001. “Residual stresses in welded I-girders made of stainless steel or carbon steel.” In Proc., 9th Nordic Steel Construction Conf., 737–744. Luleå, Sweden: Luleå Univ. of Technology.
Launert, B., M. Rhode, H. Pasternak, and T. Kannengießer. 2016. “Welding residual stresses in high strength steel: Experimental results.” In Proc., Int. Colloquium on Stability and Ductility of Steel Structures. Cottbus, Germany: Brandenburg Univ. of Technology.
Li, T.-J., G.-Q. Li, S.-L. Chan, and Y.-B. Wang. 2016. “Behavior of Q690 high-strength steel columns. 1: Experimental investigation.” J. Constr. Steel Res. 123 (Aug): 18–30. https://doi.org/10.1016/j.jcsr.2016.03.026.
Ma, T. Y., X. Liu, Y. F. Hu, K. F. Chung, and G. Q. Li. 2018. “Structural behaviour of slender columns of high strength S690 steel welded H-sections under compression.” Eng. Struct. 157 (Dec): 75–85. https://doi.org/10.1016/j.engstruct.2017.12.006.
Maquoi, R., and J. Rondal. 1978. “Mise en équation des nouvelles courbes Européennes de flambement (analytical expressions for the new European buckling standards).” [In French.] Constr. Métallique 1 (15): 17–30.
Massonnet, C., and R. Maquoi. 1978. “Recent progress in the field of structural stability of steel structures.” In IABSE Surveys, 2. Liege, Belgium: Univ. of Liege.
Rasmussen, K. J. R., and G. J. Hancock. 1992. “Plate slenderness limits for high strength steel sections.” J. Constr. Steel Res. 23 (1–3): 73–96. https://doi.org/10.1016/0143-974X(92)90037-F.
Rasmussen, K. J. R., and G. J. Hancock. 1995. “Tests of high strength steel columns.” J. Constr. Steel Res. 34 (1): 27–52. https://doi.org/10.1016/0143-974X(95)97296-A.
Reportlinker. 2018. “High strength steel market by type, end-use industry and region: Global forecast to 2023.” Accessed September 10, 2018. https://www.reportlinker.com/p03990247/High-Strength-Steel-Market-by-Type-by-End-User-by-Region-Global-Forecast-to.html.
Roberts, E. J., S. Han, and A. C. Polimeni. 2018. “Supertall in Seoul.” Civ. Eng. Mag. Archive 88 (7): 44–53. https://doi.org/10.1061/ciegag.0001302.
SCI (Steel Construction Institute). 2019. Structural steel case studies: Case study 3: STIGA sports Arena Eskilstuna, Sweden. Ascot, UK: SCI.
Seabold, S., and J. Perktold. 2010. “StatsModels: Econometric and statistical modeling with python.” In Proc., 9th Python in Science Conf. Washington, DC: American Univ.
Sedlacek, G., and C. Müller. 2005. “The use of very high strength steels in metallic construction.” In Vol. 1 of Proc., 1st Int. Conf. Super-High Strength Steels, 1–23. Aachen, Germany: RWTH Aachen Univ.
Silverman, B. 1986. Density estimation for statistics and data analysis. London: Chapman and Hall.
Somodi, B., and B. Kövesdi. 2017a. “Flexural buckling resistance of cold-formed HSS hollow section members.” J. Constr. Steel Res. 128 (Jan): 179–192. https://doi.org/10.1016/j.jcsr.2016.08.014.
Somodi, B., and B. Kövesdi. 2017b. “Flexural buckling resistance of welded HSS box section members.” Thin Walled Struct. 119 (Jun): 266–281. https://doi.org/10.1016/j.tws.2017.06.015.
Somodi, B., and B. Kövesdi. 2017c. “Residual stress measurements on cold-formed HSS hollow section columns.” J. Constr. Steel Res. 128 (Jan): 706–720. https://doi.org/10.1016/j.jcsr.2016.10.008.
Somodi, B., and B. Kövesdi. 2018. “Residual stress measurements on welded square box sections using steel grades of S235–S960.” Thin Walled Struct. 123 (Jul): 142–154. https://doi.org/10.1016/j.tws.2017.11.028.
Steenbergen, H., and R. Pijpers. 2018. “Use of HSS and VHSS in steel structures in civil and offshore engineering.” Steel Constr. 11 (4): 249–256. https://doi.org/10.1002/stco.201800018.
Strating, J., and H. Vos. 1975. “Computer simulation of the E.C.C.S. buckling curve using a Monte-Carlo method.” Constr. Métallique 3 (23): 334–358. https://doi.org/10.5169/seals-19823.
Wang, J., and L. Gardner. 2017. “Flexural buckling of hot-finished high-strength steel SHS and RHS columns.” J. Struct. Eng. 143 (6): 04017028. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001763.
Willms, R. 2009. “High strength steel for steel constructions.” In Nordic Steel Construction Conf., 597–604. Malmö, Sweden: Swedish Institute of Steel Construction.
Young, B., and K. W. Robinson. 1975. “Buckling of axially loaded welded steel columns.” Struct. Eng. 53 (5): 203–207.
Young, B. W. 1975. “The analysis of column buckling behaviour.” In Vol. 23 of IABSE Reports of the Working Commissions, 136–151. Brighton, UK: Univ. of Sussex.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Apr 11, 2019
Accepted: Jul 16, 2019
Published online: Dec 14, 2019
Published in print: Feb 1, 2020
Discussion open until: May 14, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.