Proposed Theory of Semiactive Gains for Smart Dampers in MDOF Systems
Publication: Journal of Structural Engineering
Volume 145, Issue 12
Abstract
The use of smart dampers in civil engineering structures for vibration attenuation has proven to be promising in recent years. Nevertheless, evaluating the effectiveness of smart dampers in multiple-degree-of-freedom (MDOF) dynamic systems is a time-consuming task. This hurdle hinders the consideration of potential families of controllers for a reliable design and tuning process. Consequently, the current study develops a probabilistic approach by introducing a new theory of semiactive control gains to enable the solution of highly nonlinear control systems with smart dampers by employing the Lyapunov function. The primary objective is to test a hypothesis that the tuning of controlled semiactive dampers in MDOF systems can be performed analytically without the burden of numerical simulations. As opposed to current simulation methods, the proposed probabilistic approach can be used to significantly reduce computational efforts. Accordingly, the proposed approach is useful for the design and evaluation of the efficacy of smart dampers in MDOF systems, such as multistory buildings and wind turbines. In addition, the developed control theory will enable the use of accelerated performance-based semiactive controller tuning, with a potential to advance innovative technologies for building smart, resilient, and sustainable structures that can survive multiple hazards.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study was funded by the Louisiana Board of Regents [RCS Subprogram, LEQSF(2016-19)-RD-A-02]. Additional funding was received from the Office of Research & Economic Development, Louisiana State University (2017-18 Faculty Research Grant—Emerging Research), and the Louisiana Transportation Research Center (LTRC) (14-2TIRE, 14-1ST, and 16-4ST).
References
Abdelkader, A. M., A. M. Aly, M. Rezaee, G. Bitsuamlak, and H. El Naggar. 2017. “On the evaluation of wind loads for wind turbines’ foundation design: Experimental and numerical investigations.” Struct. Des. Tall Spec. Build. 26 (9): e1362. https://doi.org/10.1002/tal.1362.
Agrawal, A. K., J. N. Yang, W. E. Schmitendorf, and F. Jabbari. 1997. “Stability of actively controlled structures with actuator saturation.” J. Struct. Eng. 123 (4): 505–512. https://doi.org/10.1061/(ASCE)0733-9445(1997)123:4(505).
Aly, A. M., and R. E. Christenson. 2008. “On the evaluation of the efficacy of a smart damper: A new equivalent energy-based probabilistic approach.” Smart Mater. Struct. 17 (4): 045008. https://doi.org/10.1088/0964-1726/17/4/045008.
Aly, A. M., A. Zasso, and F. Resta. 2011. “Dynamics and control of high-rise buildings under multidirectional wind loads.” Smart Mater. Res. 2011: 15. https://doi.org/10.1155/2011/549621.
Arrigan, J., V. Pakrashi, B. Basu, and S. Nagarajaiah. 2011. “Control of flapwise vibrations in wind turbine blades using semi-active tuned mass dampers.” Struct. Control Health Monit. 18 (8): 840–851. https://doi.org/10.1002/stc.404.
Attaway, S. 2013. Matlab: A practical introduction to programming and problem solving. Cambridge, MA: Butterworth-Heinemann.
Bagordo, G., G. Cazzulani, F. Resta, and F. Ripamonti. 2011. “A modal disturbance estimator for vibration suppression in nonlinear flexible structures.” J. Sound Vib. 330 (25): 6061–6069. https://doi.org/10.1016/j.jsv.2011.07.014.
Bigdeli, Y., and D. Kim. 2016. “Damping effects of the passive control devices on structural vibration control: TMD, TLC and TLCD for varying total masses.” KSCE J. Civ. Eng. 20 (1): 301–308. https://doi.org/10.1007/s12205-015-0365-5.
Bir, G., and J. M. Jonkman. 2008. “Modal dynamics of large wind turbines with different support structures.” In Int. Conf. on Offshore Mechanics and Arctic Engineering, 669–679. New York: ASME.
Brogan, W. L. 1982. Modern control theory. Upper Saddle River, NJ: Pearson Education India.
Choi, S. B., S. R. Hong, K. G. Sung, and J. W. Sohn. 2008. “Optimal control of structural vibrations using a mixed-mode magnetorheological fluid mount.” Int. J. Mech. Sci. 50 (3): 559–568. https://doi.org/10.1016/j.ijmecsci.2007.08.001.
Chowdhury, I., and S. Dasgupta. 2003. “Computation of Rayleigh damping coefficients for large systems.” J. Geotech. Eng. 8: 1–11.
Clough, R. W., and J. Penzien. 1993. Dynamics of structures. Singapore: McGraw-Hill.
Dyke, S. J., B. F. Spencer, P. Quast, D. C. Kaspari, and M. K. Sain. 1996a. “Implementation of an active mass damper using acceleration feedback control.” Comput.-Aided Civ. Infrastruct. Eng. 11 (5): 305–323. https://doi.org/10.1111/j.1467-8667.1996.tb00445.x.
Dyke, S. J., B. F. Spencer, P. Quast, M. K. Sain, D. C. Kaspari, and T. T. Soong. 1996b. “Acceleration feedback control of MDOF structures.” J. Eng. Mech. 122 (9): 907–917. https://doi.org/10.1061/(ASCE)0733-9399(1996)122:9(907).
Dyke, S. J., B. F. Spencer, M. K. Sain, and J. D. Carlson. 1996c. “Modeling and control of magnetorheological dampers for seismic response reduction.” Smart Mater. Struct. 5 (5): 565–575. https://doi.org/10.1088/0964-1726/5/5/006.
Erkus, B., and E. Johnson. 2011. “Dissipativity analysis of the base isolated benchmark structure with magnetorheological fluid dampers.” Smart Mater. Struct. 20 (10): 105001. https://doi.org/10.1088/0964-1726/20/10/105001.
Fang, J. Q., Q. S. Li, and A. P. Jeary. 2003. “Modified independent modal space control of MDOF systems.” J. Sound Vib. 261 (3): 421–441. https://doi.org/10.1016/S0022-460X(02)01085-4.
Feng, M. Q., and A. Mita. 1995. “Vibration control of tall buildings using mega subconfiguration.” J. Eng. Mech. 121 (10): 1082–1088. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:6(650).
Feng, Q., and M. Shinozuka. 1990. “Use of a variable damper for hybrid control of bridge response under earthquake.” In Proc., US National Workshop on Structure Control Research, USC Publication No. CE-9013. Los Angeles: Univ. of Southern California.
Hansen, M. H. 2003. “Improved modal dynamics of wind turbines to avoid stall-induced vibrations.” Wind Energy 6 (2): 179–195. https://doi.org/10.1002/we.79.
He, J., Y. L. Xu, S. Zhan, and Q. Huang. 2017. “Structural control and health monitoring of building structures with unknown ground excitations: Experimental investigation.” J. Sound Vib. 390 (Mar): 23–38. https://doi.org/10.1016/j.jsv.2016.11.035.
Housner, G. W., L. A. Bergman, T. K. Caughey, A. G. Chassiakos, R. O. Claus, S. F. Masri, R. E. Skelton, T. T. Soong, B. F. Spencer, and J. T. P. Yao. 1997. “Structural control: Past, present, and future.” J. Eng. Mech. 123 (9): 897–971. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:9(897).
Inaudi, J. 1997. “Modulated homogeneous friction: A semi-active damping strategy.” Earthquake Eng. Struct. Dyn. 26 (3): 361–376. https://doi.org/10.1002/(SICI)1096-9845(199703)26:3%3C361::AID-EQE648%3E3.0.CO;2-M.
Inaudi, J. A. 2000. “Performance of variable-damping systems: Theoretical analysis and simulation.” In Proc., 3rd Int. Workshop on Structural Control for Civil and Infrastructure Engineering, 301–316. Singapore: World Scientific.
Jansen, L. M., and S. J. Dyke. 2000. “Semiactive control strategies for MR dampers: Comparative study.” J. Eng. Mech. 126 (8): 795–803. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:8(795).
Jiang, Z., and R. Christenson. 2011. “A comparison of 200 kN magneto-rheological damper models for use in real-time hybrid simulation pretesting.” Smart Mater. Struct. 20 (6): 065011. https://doi.org/10.1088/0964-1726/20/6/065011.
Jiang, Z., and R. E. Christenson. 2012. “A fully dynamic magneto-rheological fluid damper model.” Smart Mater. Struct. 21 (6): 065002. https://doi.org/10.1088/0964-1726/21/6/065002.
Johnson, E. A., and B. Erkus. 2007. “Dissipativity and performance analysis of smart dampers via LMI synthesis.” Struct. Control Health Monit. 14 (13): 471–496. https://doi.org/10.1002/stc.169.
Jonkman, J., S. Butterfield, W. Musial, and G. Scott. 2009. Definition of a 5-MW reference wind turbine for offshore system development. Golden, CO: National Renewable Energy Laboratory.
Karnopp, D., M. J. Crosby, and R. A. Harwood. 1974. “Vibration control using semi-active force generators.” J. Eng. Ind. 96 (2): 619–626. https://doi.org/10.1115/1.3438373.
Leitmann, G. 1994. “Semiactive control for vibration attenuation.” J. Intell. Mater. Syst. Struct. 5 (6): 841–846. https://doi.org/10.1177/1045389X9400500616.
Lin, Y. Z., and R. Christenson. 2011. “Real-time hybrid test validation of a MR damper controlled building with shake table tests.” Adv. Struct. Eng. 14 (1): 79–92. https://doi.org/10.1260/1369-4332.14.1.79.
Lu, L. T., W. L. Chiang, J. P. Tang, M. Y. Liu, and C. W. Chen. 2003. “Active control for a benchmark building under wind excitations.” J. Wind Eng. Ind. Aerodyn. 91 (4): 469–493. https://doi.org/10.1016/S0167-6105(02)00431-2.
Meirovitch, L., and H. Baruh. 1983. “Robustness of the independent modal-space control method.” J. Guidance Control Dyn. 6 (1): 20–25. https://doi.org/10.2514/3.19797.
Meirovitch, L., and H. Baruh. 1985. “The implementation of modal filters for control of structures.” J. Guidance Control Dyn. 8 (6): 707–716. https://doi.org/10.2514/3.20045.
Meirovitch, L., and H. Oz. 1980. “Modal-space control of distributed gyroscopic systems.” J. Guidance Control Dyn. 3 (2): 140–150. https://doi.org/10.2514/3.55961.
Narasimhan, S., and S. Nagarajaiah. 2006. “Smart base-isolated benchmark building. Part I: Problem definition.”Struct. Control Health Monit. 13 (2–3): 573–588. https://doi.org/10.1002/stc.99.
Quilligan, A., A. O’Connor, and V. Pakrashi. 2012. “Fragility analysis of steel and concrete wind turbine towers.” Eng. Struct. 36: 270–282. https://doi.org/10.1016/j.engstruct.2011.12.013.
Ramallo, J. C., E. A. Johnson, and B. F. Spencer Jr. 2002. “Smart base isolation systems.” J. Eng. Mech. 128 (10): 1088–1099. https://doi.org/10.1061/(ASCE)0733-9399(2002)128.
Resta, F., F. Ripamonti, G. Cazzulani, and M. Ferrari. 2010. “Independent modal control for nonlinear flexible structures: An experimental test rig.” J. Sound Vib. 329 (8): 961–972. https://doi.org/10.1016/j.jsv.2009.10.021.
Rezaee, M., and A. M. Aly. 2015. “Vibration control in wind turbines: A comparative study.” In Proc., 14th Int. Conf. on Wind Engineering: ICWE14. London: International Association for Wind Engineering.
Rezaee, M., and A. M. Aly. 2016. “Vibration control in wind turbines for performance enhancement: A comparative study.” Wind Struct. 22 (1): 107–131. https://doi.org/10.12989/was.2016.22.1.107.
Rezaee, M., and A. M. Aly. 2018. “Vibration control in wind turbines to achieve desired system-level performance under single and multiple hazard loadings.” Struct. Control Health Monit. 25 (12): e2261. https://doi.org/10.1002/stc.2261.
Soong, T. T., and M. C. Constantinou, eds. 1994. Passive and active structural vibration control. New York: Springer.
Spencer, B. F., S. J. Dyke, M. K. Sain, and J. D. Carlson. 1997. “Phenomenological model of a magnetorheological damper.” J. Eng. Mech. 123 (3): 230–238. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:3(230).
Spencer, B. F., and M. K. Sain. 1997 “Controlling buildings: A new frontier in feedback.” IEEE Control Syst. Mag. 17 (6): 19–35. https://doi.org/10.1109/37.642972.
Weber, F. 2014. “Semi-active vibration absorber based on real-time controlled MR damper.” Mech. Syst. Signal Process. 46 (2): 272–288. https://doi.org/10.1016/j.ymssp.2014.01.017.
Yao, J. T. P. 1972. “Concept of structural control.” J. Struct. Div. 98(7): 1567–1574.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Aug 23, 2018
Accepted: Apr 22, 2019
Published online: Sep 28, 2019
Published in print: Dec 1, 2019
Discussion open until: Feb 28, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.