Seismic Performance of Timber–Steel Hybrid Structures. II: Calibration of Performance Objectives and Design Method
Publication: Journal of Structural Engineering
Volume 145, Issue 10
Abstract
This paper presents the calibration of performance objectives and the development of a performance-based design method for timber–steel hybrid structures that consist of a steel moment-resisting frame and prefabricated infill light frame wood shear walls. Interstory drift was adopted as the indicator of structural or nonstructural damage. One hundred twenty single-story, single-bay timber–steel hybrid lateral load-resisting subassemblies with different configurations were modeled. The interstory drift limit for the immediate occupancy (IO) performance level was determined based on the numerical results from monotonic loading simulations, and the interstory drift limit for the collapse prevention (CP) performance level was obtained through incremental dynamic analysis (IDA). To consider the energy dissipation capability during earthquakes, semistatic cyclic analysis was conducted to study the hysteretic performance and damping effect of the timber–steel hybrid structures, and an expression is proposed to determine the equivalent viscous damping of such a structural system. A direct displacement-based design procedure was developed and a design example of a timber–steel hybrid structure was used to demonstrate the design procedure. This paper bridges the gap between a series of experimental and theoretical investigations and the engineering application of the innovative timber hybrid structural system.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors gratefully acknowledge the National Natural Science Foundation of China (Grant Nos. 51608376 and 51878476) and Shanghai Sailing Program (Grant No. 16YF1411800) for supporting this research.
References
ASCE. 2006. Seismic rehabilitation of existing buildings. ASCE/SEI 41. Reston, VA: ASCE.
ASCE. 2013. Seismic evaluation and retrofit of existing buildings. ASCE/SEI 41. Reston, VA: ASCE.
ASTM. 2011. Standard specification for driven fasteners: Nails, spikes, and staples. ASTM F1667-11a. West Conshohocken, PA: ASTM.
Bezabeh, M. A., S. Tesfamariam, S. F. Stiemer, M. Popovski, and E. Karacabeyli. 2016. “Direct displacement based design of a novel hybrid structure: steel moment-resisting frames with cross laminated timber infill walls.” Earthquake Spectra 32 (3): 1565–1585. https://doi.org/10.1193/101514EQS159M.
Calvi, G. M., and T. J. Sullivan. 2009. A model code for displacement-based seismic design of structures: Draft issued for public comment. Pavia, Italy: IUSS Press.
Dwairi, H. M., M. J. Kowalsky, and J. M. Nau. 2007. “Equivalent damping in support of direct displacement-based design.” J. Earthquake Eng. 11 (4): 512–530. https://doi.org/10.1080/13632460601033884.
FEMA. 2000a. Recommended seismic design criteria for new steel moment-frame buildings. FEMA 350. Washington, DC: FEMA.
FEMA. 2000b. Recommended seismic evaluation and upgrade criteria for existing welded steel moment-frame buildings. FEMA 351. Washington, DC: FEMA.
FEMA. 2009. Quantification of building seismic performance factors. FEMA P695. Washington, DC: FEMA.
Filiatrault, A., and B. Folz. 2002. “Performance-based seismic design of wood framed buildings.” J. Struct. Eng. 128 (1): 39–47. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:1(39).
He, M., Z. Li, F. Lam, R. Ma, and Z. Ma. 2014. “Experimental investigation on lateral performance of timber-steel hybrid shear wall systems.” J. Struct. Eng. 140 (6): 04014029. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000855.
He, M., Q. Luo, Z. Li, H. Dong, and M. Li. 2018. “Seismic performance evaluation of timber-steel hybrid structure through large-scale shaking table tests.” Eng. Struct. 175 (Nov): 483–500. https://doi.org/10.1016/j.engstruct.2018.08.029.
Jacobsen, L. S. 1960. “Damping in composite structures.” In Proc., 2nd World Conf. on Earthquake Engineering. Tokyo: Science Council of Japan.
Li, Z., H. Dong, X. Wang, and M. He. 2017. “Experimental and numerical investigations into seismic performance of timber-steel hybrid structure with supplemental dampers.” Eng. Struct. 151 (Nov): 33–43. https://doi.org/10.1016/j.engstruct.2017.08.011.
Li, Z., M. He, H. Dong, Z. Shu, and X. Wang. 2018a. “Friction performance assessment of non-asbestos organic (NAO) composite-to-steel interface and polytetrafluoroethylene (PTFE) composite-to-steel interface: Experimental evaluation and application in seismic resistant structures.” Constr. Build. Mater. 174 (Jun): 272–283. https://doi.org/10.1016/j.conbuildmat.2018.04.096.
Li, Z., M. He, F. Lam, and M. Li. 2015. “Load-sharing mechanism in timber-steel hybrid shear wall systems.” Front. Struct. Civ. Eng. 9 (2): 203–214. https://doi.org/10.1007/s11709-015-0293-y.
Li, Z., M. He, F. Lam, M. Li, R. Ma, and Z. Ma. 2014. “Finite element modelling and parametric analysis of timber–steel hybrid structures.” Struct. Des. Tall Special Build. 23 (14): 1045–1063. https://doi.org/10.1002/tal.1107.
Li, Z., M. He, Z. Ma, K. Wang, and R. Ma. 2016. “In-plane behavior of timber-steel hybrid floor diaphragms: Experimental testing and numerical simulation.” J. Struct. Eng. 142 (12): 04016119. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001601.
Li, Z., M. He, X. Wang, and M. Li. 2018b. “Seismic performance assessment of steel frame infilled with prefabricated wood shear walls.” J. Constr. Steel. Res. 140 (Jan): 62–73. https://doi.org/10.1016/j.jcsr.2017.10.012.
MOHURD (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). 2012. Load code for design of building structures. [In Chinese.] GB 50009. Beijing: MOHURD.
MOHURD (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). 2016. Code for seismic design of buildings. [In Chinese.] GB 50011. Beijing: MOHURD.
MOHURD (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). 2018. Code for design of steel structures. [In Chinese.] GB 50017. Beijing: MOHURD.
Muñoz, W., M. Mohammad, A. Salenikovich, and P. Quenneville. 2008. “Determination of yield point and ductility of timber assemblies: In search for a harmonised approach.” In Proc., 10th World Conf. on Timber Engineering, 1064–1072. Red Hook, NY: Engineered Wood Products Association.
Pang, W., D. Rosowsky, S. Pei, and J. Lindt. 2010. “Simplified direct displacement design of six-story woodframe building and pretest seismic performance assessment.” J. Struct. Eng. 136 (7): 813–825. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000181.
Priestley, M. J. N. 1998. “Displacement-based approaches to rational limit states design of new structures.” In Proc., 11th European Conf. on Earthquake Engineering. Istanbul, Turkey: European Association of Earthquake Engineers.
Shu, Z., Z. Li, X. Yu, J. Zhang, and M. He. 2019. “Rotational performance of glulam bolted joints: Experimental investigation and analytical approach.” Constr. Build. Mater. 213 (Jul): 675–695. https://doi.org/10.1016/j.conbuildmat.2019.03.002.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Aug 7, 2018
Accepted: Mar 13, 2019
Published online: Aug 14, 2019
Published in print: Oct 1, 2019
Discussion open until: Jan 14, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.