An Efficient Methodology to Estimate Probabilistic Seismic Damage Curves
Publication: Journal of Structural Engineering
Volume 145, Issue 4
Abstract
The incremental dynamic analysis (IDA) is a powerful methodology that can be easily extended for calculating probabilistic seismic damage curves. These curves are metadata to assess the seismic risk of structures. Although this methodology requires a relevant computational effort, it should be the reference to correctly estimate the seismic risk of structures. Nevertheless, it would be of high practical interest to have a simpler methodology, based for instance on the pushover analysis (PA), to obtain similar results to those based on IDA. In this article, PA is used to obtain probabilistic seismic damage curves from the stiffness degradation and the energy of the nonlinear part of the capacity curve. A fully probabilistic methodology is tackled by means of Monte Carlo simulations with the purpose of establishing that the results based on the simplified proposed approach are compatible with those obtained with the IDA. Comparisons between the results of both approaches are included for a low- to midrise reinforced concrete building. The proposed methodology significantly reduces the computational effort when calculating probabilistic seismic damage curves.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research has been partially funded by the Ministry of Economy and Competitiveness (MINECO) of the Spanish Government and by the European Regional Development Fund (FEDER) of the European Union (EU) through projects referenced as CGL2011-23621 and CGL2015-65913 -P (MINECO/FEDER, UE).
References
Abrahamson, N. A., P. G. Somerville, and C. A. Cornell. 1991. “Uncertainty in numerical ground motion predictions.” In Proc., 4th US National Conf. of Earthquake Engineering, 407–416. Berkeley, CA: EERI.
Ambraseys, N., P. Smit, R. Sigbjornsson, P. Suhadolc, and B. Margaris. 2004. “Internet-site for European strong-motion data.” European Commission, Research-Directorate General, Environment and Climate Programme. Accessed May 17, 2017. http://www.isesd.hi.is/ESD_Local/frameset.htm.
Arroyo, D., and M. Ordaz. 2011. “On the forecasting of ground-motion parameters for probabilistic seismic hazard analysis.” Earthquake Spectra 27 (1): 1–21. https://doi.org/10.1193/1.3525379.
ATC (Applied Technology Council). 1996. Seismic evaluation and retrofit of concrete buildings. ATC-40. Redwood City, CA: ATC.
Barbat, A. H., M. L. Carreño, O. D. Cardona, and M. C. Marulanda. 2011. “Evaluación holística del riesgo sísmico en zonas urbanas.” Revista internacional de métodos numéricos para cálculo y diseño en ingeniería 27 (1): 3–27.
Bento, R., C. Bhatt, and R. Pinho. 2010. “Using nonlinear static procedures for seismic assessment of the 3D irregular SPEAR building.” Earthquake Struct. 1 (2): 177–195. https://doi.org/10.12989/eas.2010.1.2.177.
Bhatt, C., and R. Bento. 2011. “Assessing the seismic response of existing RC buildings using the extended N2 method.” Bull. Earthquake Eng. 9 (4): 1183–1201. https://doi.org/10.1007/s10518-011-9252-8.
Bommer, J. J., and H. Crowley. 2006. “The influence of ground motion variability in earthquake loss modelling.” Bull. Earthquake Eng. 4 (3): 231–248. https://doi.org/10.1007/s10518-006-9008-z.
Bommer, J. J., P. J. Stafford, J. E. Alarcón, and S. Akkar. 2007. “The influence of magnitude range on empirical ground-motion prediction.” Bull. Seismol. Soc. Am. 97 (6): 2152–2170. https://doi.org/10.1785/0120070081.
Brozovič, M., and M. Dolšek. 2014. “Envelope-based pushover analysis procedure for the approximate seismic response analysis of buildings.” Earthquake Eng. Struct. Dyn. 43 (1): 77–96. https://doi.org/10.1002/eqe.2333.
Carr, A. J. 2000. Ruaumoko-inelastic dynamic analysis program. Christchurch, New Zealand: Dept. of Civil Engineering, Univ. of Canterbury.
Celarec, D., and M. Dolšek. 2013. “The impact of modelling uncertainties on the seismic performance assessment of reinforced concrete frame buildings.” Eng. Struct. 52 (Jul): 340–354. https://doi.org/10.1016/j.engstruct.2013.02.036.
CEN (European committee for standardization). 2004a. Design of concrete structures. Part 1: General-common rules for building and civil engineering structures. Eurocode 2. Brussels, Belgium: CEN.
CEN (European committee for standardization). 2004b. Design of structures for earthquake resistance. Part 1: General rules, seismic actions and rules for building. Eurocode 8. Brussels, Belgium: CEN.
Chopra, A. K., and R. K. Goel. 1999. Capacity-demand-diagram methods for estimating seismic deformation of inelastic structures: SDOF systems.. Berkeley, CA: Pacific Earthquake Engineering Research Center, Univ. of California.
Chopra, A. K., and R. K. Goel. 2002. “A modal pushover analysis procedure for estimating seismic demand buildings.” Earthquake Eng. Struct. Dyn. 31 (3): 561–582. https://doi.org/10.1002/eqe.144.
Chopra, A. K., and R. K. Goel. 2004. “A modal pushover analysis procedure to estimate seismic demand for unsymmetric-plan buildings.” Earthquake Eng. Struct. Dyn. 33 (8): 903–927. https://doi.org/10.1002/eqe.380.
Chopra, A. K., R. K. Goel, and C. Chintanapakdee. 2004. “Evaluation of a modified MPA procedure assuming higher modes as elastic to estimate seismic demands.” Earthquake Spectra 20 (3): 757–778. https://doi.org/10.1193/1.1775237.
Crowley, H., J. J. Bommer, R. Pinho, and J. F. Bird. 2005. “The impact of epistemic uncertainty on an earthquake loss model.” Earthquake Eng. Struct. Dyn. 34 (14): 1653–1685. https://doi.org/10.1002/eqe.498.
Diaz-Alvarado, S. A., L. G. Pujades, A. H. Barbat, D. A. Hidalgo-Leiva, and Y. F. Vargas. 2017. “Capacity, damage and fragility models for steel buildings. A probabilistic approach.” Bull. Earthquake Eng. 16 (3): 1209–1243.
Eads, L., E. Miranda, H. Krawinkler, and D. Lignos. 2013. “An efficient method for estimating the collapse risk of structures in seismic regions.” Earthquake Eng. Struct. Dyn. 42 (1): 25–41. https://doi.org/10.1002/eqe.2191.
Egozcue, J. J., A. H. Barbat, J. A. Canas, J. Miquel, and E. Banda. 1991. “A method to estimate occurrence probabilities in low seismic activity regions.” Earthquake Eng. Struct. Dyn. 20 (1): 43–60. https://doi.org/10.1002/eqe.4290200105.
Fajfar, P. 1999. “Capacity spectrum based on inelastic demand spectra.” Earthquake Eng. Struct. Dyn. 28 (9): 979–993. https://doi.org/10.1002/(SICI)1096-9845(199909)28:9%3C979::AID-EQE850%3E3.0.CO;2-1.
Fajfar, P., and P. Gaspersic. 1996. “The N2 method for the seismic damage analysis of RC buildings.” Earthquake Eng. Struct. Dyn. 25 (1): 31–46. https://doi.org/10.1002/(SICI)1096-9845(199601)25:1%3C31::AID-EQE534%3E3.0.CO;2-V.
FEMA. 1999. HAZUS earthquake loss estimation method. Washington, DC: FEMA.
FEMA. 2005. Improvement of nonlinear static seismic procedures. FEMA 440. Washington, DC: FEMA.
Fragiadakis, M., and D. Vamvatsikos. 2010. “Fast performance uncertainty estimation via pushover and approximate IDA.” Earthquake Eng. Struct. Dyn. 39 (6): 683–703.
Franchin, P., P. Pinto, and R. Pathmanathan. 2010. “Confidence factor?” J. Earthquake Eng. 14 (7): 989–1007. https://doi.org/10.1080/13632460903527948.
Freeman, S. A. 1998. “Development and use of capacity spectrum method.” In Proc., 6th US National Conf. of Earthquake Engineering. Seattle: EERI.
Freeman, S. A., J. P. Nicoletti, and J. V. Tyrell. 1975. “Evaluations of existing buildings for seismic risk: A case study of Puget sound naval shipyard, Bremerton, Washington.” In Proc. 1st US National Conf. of Earthquake Engineering, 113–122. Berkeley, CA: EERI.
Fujii, K. 2011. “Nonlinear static procedure for multi-story asymmetric building considering bi-directional excitation.” J. Earthquake Eng. 15 (2): 245–273. https://doi.org/10.1080/13632461003702902.
Hancock, J., J. J. Bommer, and P. J. Sttaford. 2008. “Numbers of scaled and matched accelerograms required for inelastic dynamic analyses.” Earthquake Eng. Struct. Dyn. 37 (14): 1585–1607. https://doi.org/10.1002/eqe.827.
Kreslin, M., and P. Fajfar. 2012. “The extended N2 method considering higher mode effects in both plan and elevation.” Bull. Earthquake Eng. 10 (2): 695–715. https://doi.org/10.1007/s10518-011-9319-6.
Lagomarsino, S., and S. Giovinazzi. 2006. “Macroseismic and mechanical models for the vulnerability and damage assessment of current buildings.” Bull. Earthquake Eng. 4 (4): 415–443. https://doi.org/10.1007/s10518-006-9024-z.
Lantada, N., J. Irrizari, A. H. Barbat, X. Goula, A. Roca, T. Susagna, and L. G. Pujades. 2010. “Seismic hazard and risk scenarios for Barcelona, Spain, using the risk-UE vulnerability index method.” Bull. Earthquake Eng. 8 (2): 201–229. https://doi.org/10.1007/s10518-009-9148-z.
Lin, T., C. Haselton, and J. W. Baker. 2013a. “Conditional spectrum-based ground motion selection. Part I: Hazard consistency for risk-based assessments.” Earthquake Eng. Struct. Dyn. 42 (12): 1847–1865. https://doi.org/10.1002/eqe.2301.
Lin, T., C. Haselton, and J. W. Baker. 2013b. “Conditional spectrum-based ground motion selection. Part II: Intensity-based assessments and evaluation of alternative target spectra.” Earthquake Eng. Struct. Dyn. 42 (12): 1867–1884. https://doi.org/10.1002/eqe.2303.
Melchers, R. E. 1999. Structural reliability analysis and prediction. New York: Wiley.
Otani, S. 1974. “Inelastic analysis of RC frame structures.” J. Struct. Div. 100 (ST7): 1433–1449.
Park, Y. J., and A. H. S. Ang. 1985. “Mechanistic seismic damage model for reinforced concrete.” J. Struct. Eng. 111 (4): 722–739. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:4(722).
Park, Y. J., A. H. S. Ang, and Y. K. Wen. 1985. “Seismic damage analysis of reinforced concrete buildings.” J. Struct. Eng. 111 (4): 740–757. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:4(740).
Poursha, M., F. Khoshnoudian, and A. S. Moghadam. 2009. “A consecutive modal pushover procedure for estimating the seismic demands of tall buildings.” Eng. Struct. 31 (2): 591–599. https://doi.org/10.1016/j.engstruct.2008.10.009.
Pujades, L. G., Y. F. Vargas, A. H. Barbat, and J. R. González-Drigo. 2015. “Parametric model for capacity curves.” Bull. Earthquake Eng. 13 (5): 1347–1376. https://doi.org/10.1007/s10518-014-9670-5.
Reyes, J. C., and A. K. Chopra. 2010. “Three-dimensional modal pushover analysis of building subjected to two components of ground motions, including its evaluation for tall buildings.” Earthquake Eng. Struct. Dyn. 40 (7): 789–806. https://doi.org/10.1002/eqe.1060.
Reyes, J. C., and A. K. Chopra. 2011. “Evaluation of three-dimensional modal pushover analysis for unsymmetric-plan buildings subjected to two components of ground motion.” Earthquake Eng. Struct. Dyn. 40 (13): 1475–1494. https://doi.org/10.1002/eqe.1100.
Satyarno, I. 2000. “Adaptive pushover analysis for the seismic assessment of older reinforced concrete buildings.” Ph.D. thesis, Dept. of Civil Engineering, Univ. of Canterbury.
Vamvatsikos, D., and C. A. Cornell. 2002. “The incremental dynamic analysis.” Earthquake Eng. Struct. Dyn. 31 (3): 491–514. https://doi.org/10.1002/eqe.141.
Vamvatsikos, D., and M. Fragiadakis. 2010. “Incremental dynamic analysis for estimating seismic performance sensitivity and uncertainty.” Earthquake Eng. Struct. Dyn. 39 (2): 141–163.
Vargas, Y. F., L. G. Pujades, A. H. Barbat, and J. E. Hurtado. 2012. “Incremental dynamic analysis and pushover analysis of buildings.” In Vol. 2 of Computational methods in stochastic dynamics. New York: Springer.
Vargas, Y. F., L. G. Pujades, A. H. Barbat, and J. E. Hurtado. 2013a. “Capacity, fragility and damage in reinforced concrete buildings: A probabilistic approach.” Bull. Earthquake Eng. 11 (6): 2007–2032. https://doi.org/10.1007/s10518-013-9468-x.
Vargas, Y. F., L. G. Pujades, A. H. Barbat, and J. E. Hurtado. 2013b. “Evaluación probabilista de la capacidad, fragilidad y daño sísmico en edificios de hormigón armado.” Métodos numéricos para cálculo y diseño en ingeniería 29 (2): 63–78. https://doi.org/10.1016/j.rimni.2013.04.003.
Vargas, Y. F., L. G. Pujades, A. H. Barbat, and J. E. Hurtado. 2015. “Probabilistic seismic damage assessment of RC buildings based on nonlinear dynamic analysis.” Open Civ. Eng. J. 9 (1): 344–350. https://doi.org/10.2174/1874149501509010344.
Vargas, Y. F., L. G. Pujades, A. H. Barbat, J. E. Hurtado, S. A. Diaz-Alvarado, and D. A. Hidalgo-Leiva. 2017. “Probabilistic seismic damage assessment of reinforced concrete buildings considering directionality effects.” Struct. Infrastruct. Eng. 14 (6): 817–829. https://doi.org/10.1080/15732479.2017.1385089.
Williams, S. M., and R. G. Sexsmith. 1995. “Seismic damage indices for concrete structures: A state of the art review.” Earthquake Spectra 11 (2): 319–349. https://doi.org/10.1193/1.1585817.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Oct 13, 2017
Accepted: Sep 18, 2018
Published online: Jan 28, 2019
Published in print: Apr 1, 2019
Discussion open until: Jun 28, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.