Design Approach to Predict Post-Tensioning Losses in Post-Tensioned Timber Frames
Publication: Journal of Structural Engineering
Volume 144, Issue 8
Abstract
Since 2010, twelve post-tensioned timber (Pres-Lam) buildings have been constructed throughout the world. The technology relies on unbonded post-tensioning tendons to provide moment capacity to beam-column, wall-foundation, or column-foundation connections. Supplemental energy dissipation can be introduced by mild steel bars or replaceable damping devices when designing buildings for high seismic risk areas. Creep within the timber elements leads to losses in post-tensioning force over time. The amount of post-tensioning loss depends on the members’ geometry, environmental service conditions, and the initial moisture content of wood. This paper presents a design approach for estimating, via hand calculations, the amount of post-tensioning loss expected for the most common design configurations.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to thank Paul Drummond from Trimble Inc. for providing the monitoring data of the Trimble Navigation Offices building.
References
Armstrong, L. D., and R. S. T. Kingston. 1960. “Effect of moisture changes on creep in wood.” Nature 185 (4716): 862–863. https://doi.org/10.1038/185862c0.
Bazant, Z. P. 1972. “Prediction of concrete creep effects using age-adjusted effective.” J. Am. Concr. Inst. 69 (4): 212–217.
Brown, A., J. Lester, S. Pampanin, and D. Pietra. 2012. “Pres-Lam in practice: A damage-limiting rebuild project.” In Proc., New Zealand Society of Structural Engineers Conf. Auckland, New Zealand.
Buchanan, A., B. Deam, M. Fragiacomo, S. Pampanin, and A. Palermo. 2008. “Multi-storey prestressed timber buildings in New Zealand.” Struct. Eng. Int. 18 (2): 166–173. https://doi.org/10.2749/101686608784218635.
CEN (European Committee for Standardisation). 2004a. Design of timber structures. Part 1-1: General rules and rules for buildings. Eurocode 5. Brussels, Belgium: CEN.
CEN (European Committee for Standardization). 2004b. Design of concrete structures: Part 1-1: General rules and rules for buildings. Eurocode 2. Brussels, Belgium: CEN.
Chiorino, M. A., P. Napoli, F. Mola, and M. Koprna. 1984. CEB design manual on structural effects of time-dependent behaviour of concrete. Saint-Saphorin, Switzerland: Georgi Publishing.
Christopoulos, C., A. Filiatrault, C. Uang, and B. Folz. 2002. “Post-tensioned energy dissipating connections for moment resisting steel frames.” J. Struct. Eng. 128 (9): 1111–1120. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:9(1111).
Curtain, B., D. Dekker, S. Chung, and A. Palermo. 2012. “Design of carterton event centre: An example of innovative collaboration between architecture and timber engineering.” In Proc., World Conf. on Timber Engineering. Auckland, New Zealand.
Davies, M., and M. Fragiacomo. 2011. “Long-term behavior of prestressed LVL members. I: Experimental tests.” J. Struct. Eng. 137 (12): 1553–1561. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000405.
Devereux, C. P., T. J. Holden, A. H. Buchanan, and S. Pampanin. 2011. “NMIT Arts & Media Building: Damage mitigation using post-tensioned timber walls.” In Proc., Pacific Conf. on Earthquake Engineering. Auckland, New Zealand.
Fortino, S., A. Genoese, A. Genoese, L. Nunes, and P. Palma. 2013. “Numerical modelling of the hygro-thermal response of timber bridges during their service life: A monitoring case-study.” Constr. Build. Mater. 47: 1225–1234. https://doi.org/10.1016/j.conbuildmat.2013.06.009.
Fragiacomo, M. 2005. “A finite element model for long-term analysis of timber-concrete composite beams.” Struct. Eng. Mech. 20 (2): 173–189. https://doi.org/10.12989/sem.2005.20.2.173.
Fragiacomo, M., and M. Davies. 2011. “Long-term behavior of prestressed LVL members. II: Analytical approach.” J. Struct. Eng. 137 (12): 1562–1572. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000410.
Frandsen, H. L. 2007. “Selected constitutive models for simulating the hygromechanical response of wood.” Ph.D. thesis, Dept. of Civil Engineering, Aalborg Univ.
Giorgini, S. 2010. “Service load analysis and design of long span unbonded post-tensioned timber beams.” M.Sc. thesis, Dept. of Civil Engineering, Univ. of Canterbury.
Granello, G., S. Giorgini, A. Palermo, D. Carradine, S. Pampanin, and R. Finch. 2017a. “Long-term behavior of LVL posttensioned timber beams.” J. Struct. Eng. 143 (12): 04017158. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001907.
Granello, G., C. Leyder, A. Frangi, A. Palermo, and E. Chatzi. 2017b. “Long-term performance assessment of an operative post-tensioned timber frame structure.” J. Struct. Eng., in press.
Granello, G., A. Palermo, S. Pampanin, T. Smith, and F. Sarti. 2017c. “The implications of post-tensioning losses on the seismic response of pres-lam frames.” Bull. N. Z. Soc. Earthquake Eng. 51 (2): in press.
Granello, G., S., Giorgini, A. Palermo, and S. Pampanin. 2016. “Posttensioned LVL beams: Experimental results and numerical modelling.” In Proc., World Conf. on Timber Engineering 2016. Vienna, Austria.
Grouni, H. N. 1978. “Loss of prestress due to relaxation after transfer.” J. Proc. 75 (2): 64–66.
Iqbal, A., S. Pampanin, A. Palermo, and A. H. Buchanan. 2015. “Performance and design of LVL walls coupled with UFP dissipaters.” J. Earthquake Eng. 19 (3): 383–409. https://doi.org/10.1080/13632469.2014.987406.
Khorsandnia, N., J. Schänzlin, H. Valipour, and K. Crews. 2015. “Coupled finite element-finite difference formulation for long-term analysis of timber–concrete composite structures.” Eng. Struct. 96: 139–152. https://doi.org/10.1016/j.engstruct.2015.03.047.
Leyder, C., F. Wanninger, A. Frangi, and E. Chatzi. 2015. “Dynamic response of an innovative hybrid structure in hardwood.” Proc. Inst. Civ. Eng. Constr. Mater. 168 (3): 132–143. https://doi.org/10.1680/coma.14.00043.
Newcombe, M. P., S. Pampanin, A. Buchanan, and A. Palermo. 2008. “Section analysis and cyclic behavior of post-tensioned jointed ductile connections for multi-story timber buildings.” J. Earthquake Eng. 12 (S1): 83–110. https://doi.org/10.1080/13632460801925632.
Palermo, A., S. Pampanin, A. Buchanan, and M. Newcombe. 2005. “Seismic design of multi-storey buildings using laminated veneer lumber (LVL).” In Proc., New Zealand Society for Earthquake Engineering Conf. Wairakei, New Zealand.
Priestley, M. J. N. 1991. “Overview of PRESSS research program.” PCI J. 36 (4): 50–57. https://doi.org/10.15554/pcij.07011991.50.57.
Ranta-Maunus, A. 1975. “The viscoelasticity of wood at varying moisture content.” Wood Sci. Technol. 9 (3): 189–205. https://doi.org/10.1007/BF00364637.
Rasmussen, E. F. 1961. Dry Kiln: Operator’s manual. Madison, WI: USDA.
Sarti, F., A. Palermo, and S. Pampanin. 2016a. “Fuse-type external replaceable dissipaters: Experimental program and numerical modeling.” J. Struct. Eng. 142 (12): 04016134. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001606.
Sarti, F., A. Palermo, and S. Pampanin. 2016b. “Quasi-static cyclic testing of two-thirds scale unbonded posttensioned rocking dissipative timber walls.” J. Struct. Eng. 142 (4): E4015005. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001291.
Schänzlin, J. 2010. Modeling the long-term behavior of structural timber for typical serviceclass-II-conditions in south-west Germany: Habilitation. Univ. of Stuttgart.
Smith, T., S. Pampanin, A. Cesare, F. Ponzo, M. Simonetti, D. Nigro, and D. Carradine. 2014. “Shaking table testing of a multi-storey post-tensioned timber building.” In Proc., New Zealand Society for Earthquake Engineering Conf. Auckland, New Zealand.
Smith, T., F. C. Ponzo, A. Di Cesare, S. Pampanin, D. Carradine, A. H. Buchanan, and D. Nigro. 2013. “Post-tensioned glulam beam-column joints with advanced damping systems: Testing and numerical analysis.” J. Earthquake Eng. 18 (1): 147–167. https://doi.org/10.1080/13632469.2013.835291.
Soliman, M. H., and J. B. Kennedy. 1986. “Prestress losses in continuous composite bridges.” PCI J. 31 (1): 84–105.
Stone, W. C., G. S. Cheok, and J. F. Stanton. 1995. “Performance of hybrid moment-resisting precast beam-column concrete connections subjected to cyclic loading.” ACI Struct. J. 92 (2): 229–249.
Svensson, S., and T. Toratti. 2002. “Mechanical response of wood perpendicular to grain when subjected to changes of humidity.” Wood Sci. Technol. 36 (2): 145–156. https://doi.org/10.1007/s00226-001-0130-4.
Toratti, T. 1992. Creep of timber beams in variable environment. Helsinki, Finland: Helsinki Univ. of Technology.
Trevino, J., and A. Ghali. 1985. “Relaxation of steel in prestressed concrete.” PCI J. 30 (5): 82–94.
Trost, H. 1967. “Implications of the superposition principle and creep and relaxation problems for concrete and prestressed concrete.” [In German.] Beton-and Stahlbetonbau 62 (10): 230–238.
van Beerschoten, W. A., A. Palermo, and D. Carradine. 2014. “Experimental testing of posttensioned timber frames under gravity loading.” J. Struct. Eng. 141 (9): 04014210. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001179.
Wanninger, F., and A. Frangi. 2014. “Experimental and analytical analysis of a post-tensioned timber connection under gravity loads.” Eng. Struct. 70: 117–129. https://doi.org/10.1016/j.engstruct.2014.03.042.
Wanninger, F., A. Frangi, and M. Fragiacomo. 2015. “Long-term behavior of posttensioned timber connections.” J. Struct. Eng. 141 (6): 04014155. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001121.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 144 • Issue 8 • August 2018
Copyright
©2018 American Society of Civil Engineers.
History
Received: Jul 18, 2017
Accepted: Feb 4, 2018
Published online: Jun 9, 2018
Published in print: Aug 1, 2018
Discussion open until: Nov 9, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.