Hysteretic Bond Stress-Slip Response of Deformed Bars in Concrete under Uniaxial Lateral Pressure
Publication: Journal of Structural Engineering
Volume 144, Issue 6
Abstract
The bond stress-slip relation between steel bars and concrete under reversed loading is very important for the seismic analysis and rehabilitation of concrete structures. In this study, an experimental investigation has been conducted to study the hysteretic bond response of deformed bars under uniaxial lateral pressure. Based on the experimental results, the variation of the bond parameters of reinforced concrete under different reversed loading conditions, uniaxial lateral pressures, and bar diameters were examined. It was found that the decay in the peak bond stress and frictional resistance is greatly influenced by lateral pressure and the bar diameter. Moreover, an empirical bond stress-slip constitutive model for reinforced concrete under reversed loading was proposed and validated against experimental results.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The financial support from the National Natural Science Foundation with Grant Nos. 51278082 and 51421064, the Open Research Found Program of Zhejiang Key Laboratory of Civil Engineering Structures and Disaster Prevention and Mitigation Technology, the Science and Technology Research Program of Chongqing Municipal Education Commission with Grant No. KJ1705125, and the Chongqing Youth Science and Technology Talent Program with Grant No. cstc2014kjrc-qnrc30001 of the People’s Republic of China is greatly acknowledged.
References
Balazs, G. L. (1992). “Fatigue of bond.” ACI Mater. J., 88(6), 620–630.
Darwin, D., and Graham, E. K. (1993). “Effect of deformation height and spacing on bond strength of reinforcing bars.” ACI Struct. J., 90(6), 646–657.
Eligehausen, R., Popov, E. P., and Bertero, V. V. (1983). “Local bond stress–slip relationships of deformed bars under generalized excitations.”, Univ. of California, Berkeley, CA.
Fang, C., Gylltoft, K., and Lundgren, K. (2006). “Effect of corrosion on bond in reinforced concrete under cyclic loading.” Cem. Concr. Res., 36(3), 548–555.
Fard, M. A., and Marzouk, H. (2002). “Bond behavior of high strength concrete under reversed pull-out cyclic loading.” Can. J. Civ. Eng., 29(2), 191–200.
Feldman, L. R., and Bartlett, F. M. (2007). “Bond stresses along plain steel reinforcing bars in pullout specimens.” ACI Struct. J., 104(6), 685–692.
Filippou, F. C., Popov, E. P., and Bertero, V. V. (1983). “Effects of bond deterioration on hysteretic behavior of reinforced concrete joints.”, Univ. of California, Berkeley, CA.
Harajli, M. H. (2009). “Bond stress–slip model for steel bars in unconfined or steel, FRC, or FRP confined concrete under cyclic loading.” J. Struct. Eng., 509–518.
Harajli, M. H., and Gharzeddine, O. (2007). “Effect of steel fibers on bond performance of steel bars in NSC and HSC under load reversals.” J. Mater. Civ. Eng., 864–873.
Laldji, S., and Young, A. G. (1988). “Bond between steel strand and cement grout in ground anchorage.” Mag. Concr. Res., 40(143), 90–98.
Li, J., Gao, X., and Zhang, P. (2007). “Experimental investigation on the bond of reinforcing bars in high performance concrete under cyclic loading.” Mater. Struct., 40(10), 1027–1044.
Li, X., Wu, Z., Zheng, J., and Alahdal, A. (2016a). “Effect of loading rate on bond behavior of deformed reinforcing bars in concrete under biaxial lateral pressures.” J. Struct. Eng., 04016027.
Li, X., Wu, Z., Zheng, J., Alahdal, A., and Dong, W. (2016b). “Effect of loading rate on the bond behaviour of deformed steel bars in concrete subjected to lateral pressure.” Mater. Struct., 49(6), 2097–2111.
Lindorf, A., Lemnitzer, L., and Curbach, M. (2009). “Experimental investigations on bond behaviour of reinforced concrete under transverse tension and repeated loading.” Eng. Struct., 31(7), 1469–1476.
Lundgren, K. (2000). “Pull-out tests of steel encased specimens subjected to reversed cyclic loading.” Mater. Struct., 33(7), 450–456.
Lutz, L. A., and Gergely, P. (1967). “Mechanics of bond and slip of deformed bars in concrete.” J. Am. Concr. Inst., 64(11), 711–721.
Malvar, L. J. (1992). “Bond of reinforcement under controlled confinement.” ACI Mater. J., 89(6), 593–601.
Malvar, L. J. (1995). “Tensile and bond properties of GFRP reinforcing bars.” ACI Mater. J., 92(3), 276–285.
Monti, G., and Spacone, E. (2000). “Reinforced concrete fiber beam element with bond-slip.” J. Struct. Eng., 654–661.
Moosavi, M., Jafari, A., and Khosravi, A. (2005). “Bond of cement grouted reinforcing bars under constant radial pressure.” Cem. Concr. Compos., 27(1), 103–109.
Murcia-Delso, J., Stavridis, A., and Shing, P. B. (2013). “Bond strength and cyclic bond deterioration of large diameter bars.” ACI Struct. J., 110(4), 659–669.
Nagatomo, K., and Kaku, T. (1992). “Bond behaviour of deformed bars under lateral compressive and tensile stress.” Proc., Int. Conf., Bond in Concrete, Riga Technical Univ., Riga, Latvia, 1–69.
Navaratnarajah, V., and Speare, P. R. S. (1986). “An experimental study of the effects of lateral pressure on the transfer bond of reinforcing bars with variable cover.” Proc. Inst. Civ. Eng., 81(4), 697–715.
Robins, P. J., and Standish, I. G. (1982). “The effect of lateral pressure on the bond of round reinforcing bars in concrete.” Int. J. Adhes. Adhes., 2(2), 129–133.
Robins, P. J., and Standish, I. G. (1984). “The influence of lateral pressure upon anchorage bond.” Mag. Concr. Res., 36(129), 195–202.
Soroushian, P., and Choi, K. B. (1989). “Local bond of deformed bars with different diameters in confined concrete.” ACI Struct. J., 86(2), 217–222.
Taylor, H. P. J., and Clarke, J. L. (1976). “Some detailing problems in concrete frame structures.” Struct. Eng., 54(1), 19–32.
Untrauer, R. E., and Henry, R. L. (1965). “Influence of normal pressure on bond strength.” J. Am. Concr. Inst., 62(5), 577–585.
Verderame, G. M., De Carlo, G., Ricci, P., and Fabbrocino, G. (2009a). “Cyclic bond behaviour of plain bars. II: Analytical investigation.” Constr. Build. Mater., 23(12), 3512–3522.
Verderame, G. M., Ricci, P., Carlo, G. D., and Manfredi, G. (2009b). “Cyclic bond behaviour of plain bars. I: Experimental investigation.” Constr. Build. Mater., 23(12), 3499–3511.
Walker, P., Batayneh, M., and Regan, P. (1997). “Bond strength tests on deformed reinforcement in normal weight concrete.” Mater. Struct., 30(7), 424–429.
Wu, X., Wu, Z. M., Zheng, J. J., and Zhang, X. (2013). “Bond behavior of deformed bars in self-compacting lightweight concrete subjected to lateral pressure.” Mag. Concr. Res., 65(23), 1396–1410.
Xu, F., Wu, Z. M., Zheng, J. J., Hu, Y., and Li, Q. B. (2012). “Experimental study on the bond behavior of reinforcing bars embedded in concrete subjected to lateral pressure.” J. Mater. Civ. Eng., 125–133.
Xu, F., Wu, Z. M., Zheng, J. J., Hu, Y., and Li, Q. B. (2014). “Bond behavior of plain round bars in concrete under complex lateral pressures.” ACI Struct. J., 111(1), 15–26.
Zuo, J., and Darwin, D. (2000). “Bond slip of high relative rib area bars under cyclic loading.” ACI Struct. J., 97(2), 331–334.
Information & Authors
Information
Published In
Copyright
©2018 American Society of Civil Engineers.
History
Received: Apr 11, 2016
Accepted: Nov 1, 2017
Published online: Mar 20, 2018
Published in print: Jun 1, 2018
Discussion open until: Aug 20, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.