Seismic Response of a Yielding Structure Coupled with a Rocking Wall
Publication: Journal of Structural Engineering
Volume 144, Issue 2
Abstract
This paper investigates the inelastic response of a yielding single-degree-of-freedom oscillator coupled with a rocking wall. Configurations of both a stepping rocking wall and a pinned rocking wall that have been reported in the literature are examined. The full nonlinear equations of motions are derived, and the paper shows that a stepping wall suppresses peak and permanent displacements, with the heavier wall being most effective. In contrast, when the yielding oscillator is coupled with a pinned rocking wall, both peak and permanent displacements increase, with the heavier wall being most unfavorable. This unfavorable response is mainly because the moment from the weight of the pinned wall works against stability, and in most cases, it contributes to larger permanent displacements.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ajrab, J. J., Pekcan, G., and Mander, J. B. (2004). “Rocking wall-frame structures with supplemental tendon systems.” J. Struct. Eng., 895–903.
Alavi, B., and Krawinkler, H. (2004a). “Behavior of moment-resisting frame structures subjected to near-fault ground motions.” Earthquake Eng. Struct. Dyn., 33(6), 687–706.
Alavi, B., and Krawinkler, H. (2004b). “Strengthening of moment-resisting frame structures against near-fault ground motion effects.” Earthquake Eng. Struct. Dyn., 33(6), 707–722.
Baber, T. T., and Wen, Y. K. (1981). “Random vibration of hysteretic degrading systems.” J. Eng. Mech., 107(EM6), 1069–1087.
Bertero, V. V., Mahin, S. A., and Herrera, R. A. (1978). “Aseismic design implications of near-fault San Fernando earthquake records.” Earthquake Eng. Struct. Dyn., 6(1), 31–42.
Bouc, R. (1967). “Forced vibration of mechanical systems with hysteresis.” Proc., 4th Conf. on Non-Linear Oscillation, Prague, Czechoslovakia.
Constantinou, M., and Adnane, M. (1987). “Dynamics of soil-base-isolated-structure systems: Evaluation of two models for yielding systems.”, Drexel Univ., Philadelphia.
Goda, K., Hong, H., and Lee, C. (2009). “Probabilistic characteristics of seismic ductility demand of SDOF systems with Bouc-Wen hysteretic behavior.” J. Earthquake Eng., 13(5), 600–622.
Grigorian, C. E., and Grigorian, M. (2015). “Performance control and efficient design of rocking-wall moment frames.” J. Struct. Eng., 04015139.
Grigorian, M., and Grigorian, C. (2016). “An introduction to the structural design of rocking wall-frames with a view to collapse prevention, self-alignment and repairability.” Struct. Des. Tall Special Build., 25(2), 93–111.
Grigorian, M., Moghadam, A. S., and Mohammadi, H. (2017). “On rocking core-moment frame design.” Proc., 16th World Conf. on Earthquake Engineering, Santiago, Chile.
Hall, J. F., Heaton, T. H., Halling, M. W., and Wald, D. J. (1995). “Near-source ground motion and its effects on flexible buildings.” Earthquake Spectra, 11(4), 569–605.
Holden, T., Restrepo, J., and Mander, J. B. (2003). “Seismic performance of precast reinforced and prestressed concrete walls.” J. Struct. Eng., 286–296.
Housner, G. W. (1963). “The behavior of inverted pendulum structures during earthquakes.” Bull. Seismol. Soc. Am., 53(2), 403–417.
Hu, X., and Zhang, Y. (2016). “Seismic performance of reinforced concrete frames retrofitted with self-centering hybrid wall.” Adv. Struct. Eng., 15(12), 2131–2143.
Kunnath, S. K., Mander, J. B., and Fang, L. (1997). “Parameter identification for degrading and pinched hysteretic structural concrete systems.” Eng. Struct., 19(3), 224–232.
Kurama, Y. C., Sause, R., Pessiki, S., and Lu, L.-W. (1999). “Lateral load behavior and seismic design of unbonded post-tensioned precast concrete walls.” ACI Struct. J., 96(4), 622–632.
Kurama, Y. C., Sause, R., Pessiki, S., and Lu, L.-W. (2002). “Seismic response evaluation of unbonded post-tensioned precast walls.” ACI Struct. J., 99(5), 641–651.
Lu, Y. (2005). “Inelastic behaviour of RC wall-frame with a rocking wall and its analysis incorporating 3-D effect.” Struct. Des. Tall Special Build, 14(1), 15–35.
Makris, N. (1996). “Near-source earthquakes, base isolated structures and semiactive damper.” Proc., 1st Int. Symp. on Earthquake Resistant Engineering Structures, G. D. Manolis and D. E. Beskos, eds., WIT Press, Ashurst, Southampton, U.K., 219–360.
Makris, N. (2014a). “A half-century of rocking isolation.” Earthquakes Struct., 7(6), 1187–1221.
Makris, N. (2014b). “The role of the rotational inertia on the seismic resistance of free-standing rocking columns and articulated frames.” Bull. Seismol. Soc. Am., 104(5), 2226–2239.
Makris, N., and Aghagholizadeh, M. (2017). “The dynamics of an elastic structure coupled with a rocking wall.” Earthquake Eng. Struct. Dyn., 46(6), 945–962.
Makris, N., and Black, C. J. (2002). “Uplifting and overturning of equipment anchored to a base foundation.” Earthquake Spectra, 18(4), 631–661.
Makris, N., and Chang, S.-P. (2000). “Response of damped oscillators to cycloidal pulses.” J. Eng. Mech., 123–131.
Makris, N., and Kampas, G. (2013). “The engineering merit of the ‘effective period’ of bilinear isolation systems.” Earthquakes Struct., 4(4), 397–428.
Makris, N., and Roussos, Y. (2000). “Rocking response of rigid blocks under near-source ground motions.” Geotechnique, 50(3), 243–262.
Makris, N., and Vassiliou, M. F. (2014). “Dynamics of the rocking frame with vertical restrainers.” J. Struct. Eng., 04014245.
MATLAB 9.0.0 [Computer software]. MathWorks, Natick, MA.
Meek, J. (1978). “Dynamic response of tipping core buildings.” Earthquake Eng. Struct. Dyn., 6(5), 437–454.
Nakaki, S. D., Stanton, J. F., and Sritharan, S. (1999). “An overview of the PRESSS five-story precast test building.” PCI J., 44(2), 26–39.
OpenSees 2.5.0 [Computer software]. Pacific Earthquake Engineering Research Center, Univ. of California, Berkeley, CA.
Priestley, M. N. (1991). “Overview of PRESSS research program.” PCI J., 36(4), 50–57.
Qu, Z., Wada, A., Motoyui, S., Sakata, H., and Kishiki, S. (2012). “Pin-supported walls for enhancing the seismic performance of building structures.” Earthquake Eng. Struct. Dyn., 41(14), 2075–2091.
Seymour, D., and Laflamme, S. (2011). “Quasi-static analysis of rocking wall systems.” ⟨http://www.works.bepress.com⟩ (Jan. 15, 2016).
Toranzo, L., Restrepo, J., Mander, J., and Carr, A. (2009). “Shake-table tests of confined-masonry rocking walls with supplementary hysteretic damping.” J. Earthquake Eng., 13(6), 882–898.
Vassiliou, M. F., Mackie, K. R., and Stojadinović, B. (2014). “Dynamic response analysis of solitary flexible rocking bodies: Modeling and behavior under pulse-like ground excitation.” Earthquake Eng. Struct. Dyn., 43(10), 1463–1481.
Vassiliou, M. F., and Makris, N. (2015). “Dynamics of the vertically restrained rocking column.” J. Eng. Mech., 04015049.
Wada, A., Qu, Z., Motoyui, S., and Sakata, H. (2011). “Seismic retrofit of existing SRC frames using rocking walls and steel dampers.” Frontiers Archit. Civil Eng. China, 5(3), 259–266.
Wen, Y.-K. (1975). “Approximate method for nonlinear vibration.” J. Eng. Mech., 101(4), 389–401.
Wen, Y.-K. (1976). “Method for random vibration of hysteretic systems.” J. Eng. Mech., 102(2), 249–263.
Zhang, J., and Makris, N. (2001). “Rocking response of free-standing blocks under cycloidal pulses.” J. Eng. Mech., 473–483.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Jan 21, 2017
Accepted: May 25, 2017
Published online: Nov 23, 2017
Published in print: Feb 1, 2018
Discussion open until: Apr 23, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.