Flexural Behavior of Glass Beams with T and I Shape Cross Sections
Publication: Journal of Structural Engineering
Volume 143, Issue 9
Abstract
Glass beams having T or I cross sections can be obtained as glass panels or laminated glass (LG) panels assembled with polymer adhesives of different types, such as semirigid (silicones, modified silicones, and polyurethanes) and rigid (epoxy resins, acrylic). Beams can be used mainly as members of transparent roof or floor structures, and as stiffening fins for large-area glass facades. The glued joints between panels constituting the web and flanges of a cross section, created using semirigid polymer adhesive, are the key element of the composite structures, assigning a load-carrying capacity. This paper focuses on the choice of the type of adhesive and of the shape and dimensions of the transverse cross section of glass beams for structural applications. An analytical model is presented for a preliminary design of composite glass beams. The model, able to predict the load-deflection response of the beam, includes limit states due to tensile strength of the glass and glue shear failure. Experimental data given in the literature are utilized to show the effectiveness of the analytical model to reproduce experimental results.
Get full access to this article
View all available purchase options and get full access to this article.
References
Amadio, C., and Bedon, C. (2011). “Buckling of laminated glass elements in compression.” J. Struct. Eng., 803–810.
Ballarini, R., Pisano, G., and Royer-Carfagni, G. (2016). “The lower bound for glass strength and its interpretation with generalized Weibull statistics for structural applications.” J. Eng. Mech., 04016100.
Behr, R. A., Minor, J. E., Linden, M. P., and Vallabhan, C. V. G. (1985). “Laminated glass units under uniform lateral pressure.” J. Struct. Eng., 1037–1050.
Bennison, S. J., Smith, C. A., and Van Duser, A. (2002). “Structural performance of laminated glass made with a stiff interlayer.” Symp. on the Use of Glass in Buildings, Univ. of Pittsburgh, Pittsburgh.
Biolzi, L., Cattaneo, S., and Rosati, G. (2010). “Progressive damage and fracture of laminated glass beams.” Constr. Build. Mater., 24(4), 577–584.
Briccoli Bati, S., Ranocchiai, G., Reale, C., and Rovero, L. (2010). “Time-dependent behavior of laminated glass.” J. Mater. Civ. Eng., 389–396.
Campione, G., Colaianni, S., and Minafò, G. (2012). “The use of steel angles for the connection of laminated glass beams: Experimental and modelling.” Constr. Build. Mater., 29, 682–689.
Campione, G., Di Paola, M., and Minafò, G. (2014). “Laminated glass members in compression: Experiments and modelling.” J. Struct. Eng., 234–245.
CEN (European Committee for Standardization). (2004). “Design of timber structures. Part 1-1: General.”, Brussels, Belgium.
CNR DT. (2012). “Consiglio Nazionale delle Ricerche”; (2012). “Istruzioni per la Progettazione, l’Esecuzione ed il Controllo di Costruzioni con Elementi Strutturali di Vetro.”, Rome (in Italian).
Firmo, F., Jordao, S., Costa-Neves, L., and Bedon, C. (2016). “The effect of adhesive joints on the performance of hybrid steel-glass beams—An analytical and experimental study.” Conf. on Architectural and Structural Applications of Glass, Ghent, Belgium, 171–185.
Foraboschi, P. (2007). “Behavior and failure strength of laminated glass beams.” J. Eng. Mech., 1290–1301.
Fröling, M., and Persson, K. (2013). “Computational methods for laminated glass.” J. Eng. Mech., 780–790.
Kalamar, R., Bedon, C., and Eliášová, M. (2016). “Experimental investigation for the structural performance assessment of square hollow glass columns.” Eng. Struct., 113, 1–15.
Louter, C., Callewaert, D., Belis, J., Veer, F., and Bos, F. (2008). “Reinforced glass beams: Effect of increased temperatures on the glass-to-reinforcement adhesive bond.” Structures Congress 2008, Delft Univ., Delft, Netherlands, 1–9.
Machalická, K., Iorčičková, H., and Eliášová, M. (2015). “Shear adhesive connections for glass structures.” IOP Conf. Series: Materials Science and Engineering, IOP Publishing, Bristol, U.K.
Overend, M., Jin, Q., and Watson, J. (2011). “The selection and performance of adhesive for a steel-glass connection.” Int. J. Adhes. Adhes., 31(7), 587–597.
Pye, A., and Ledbetter, S. (1998). “The selection of an adhesive for the construction of a glass-adhesive T-beam.” Int. J Adhes. Adhes., 18(3), 159–165.
Santarsiero, M., Froli, M., and Louter, C. (2014). “Equivalent-design crack model for structural glass elements.” J. Struct. Eng., 04014016.
So, A. K. W., and Chan, S. L. (1996). “Nonlinear finite element analysis of glass panels.” J. Eng. Struct., 18(8), 645–652.
Vallabhan, C. V. G., Das, Y. C., Magdi, M., Asik, M., and Bailey, J. R. (1993). “Analysis of laminated glass units.” Struct. J., 119(5), 1572–1585.
Vallabhan, C. V. G., and Wang, B. Y. T. (1981). “Nonlinear analysis of rectangular glass by finite difference method.” Institute for Disaster Research, Texas Technical Univ., Lubbock, TX.
Van Lancker, B., Dispersyn, J., De Corte, W., and Belis, J. (2016). “Durability of adhesive glass-metal connections for structural applications.” Eng. Struct., 126, 237–251.
Information & Authors
Information
Published In
Copyright
©2017 American Society of Civil Engineers.
History
Received: Sep 28, 2016
Accepted: Feb 28, 2017
Published online: Jun 14, 2017
Published in print: Sep 1, 2017
Discussion open until: Nov 14, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.