Ground Motion Characteristics of the 2015 Gorkha, Nepal, Earthquake and Its Effects on a Prototype Unreinforced Masonry Building
Publication: Journal of Structural Engineering
Volume 143, Issue 4
Abstract
The 7.8-magnitude Nepal earthquake on April 25, 2015, caused more than 9,000 fatalities and tremendous damage to civil infrastructures. Some unique characteristics of this earthquake and its effects on a prototype unreinforced masonry (URM) building have been investigated in this paper. The ground motion has short period components in the period range of as well as long-period components in the period range of 4–6 s. This characteristic is unique with respect to recorded ground motions in other parts of the world and with respect to the design response spectra in the Kathmandu region. Effects of this particular composition of frequency contents are discussed within the context of both elastic and inelastic response spectra. Common ground motion parameters for this earthquake have been investigated to compare the destructiveness of this earthquake to other historical earthquakes. In addition to this, acceleration spectrum intensity (ASI), which has been typically utilized for seismic evaluation of concrete dams, has been investigated to show unique characteristics of this earthquake. The long-period motion in the recorded time histories can be approximated by an analytical pulse model available in the literature. Frequency contents of this earthquake have also been investigated by using the empirical mode decomposition (EMD) approach, which provides insight into the contributions of various frequency contents to the recorded ground motion. It is also demonstrated that, although the record motion has a long predominant period, it is capable of severely damaging stiff, short-period, unreinforced masonry structures with timber diaphragm because of the presence of short-period components in the ground motion.
Get full access to this article
View all available purchase options and get full access to this article.
References
ASCE. (2007). “Seismic rehabilitation of existing buildings.” ASCE/SEI 41-06, Reston, VA.
ASCE. (2010). “Minimum design loads for buildings and other structures.” ASCE/SEI 7-10, Reston, VA.
Aydan, O., and Ulusay, R. (2015). “A quick report on the 2015 Gorkha (Nepal) earthquake and its geo-engineering aspects.” ⟨http://www.iaeg.info/quick-report-on-the-2015-gorkha-nepal-earthquake-and-its-geoengineering-aspects/⟩ (Aug. 11, 2015).
Bradley, B. A. (2010). “Site-specific and spatially distributed ground-motion prediction of acceleration spectrum intensity.” Bull. Seismol. Soc. Am., 100(2), 792–801.
Build Change. (2015). “April 25, 2015—Gorkha earthquake, Nepal—Build change post-disaster reconnaissance report.” ⟨http://www.eqclearinghouse.org/2015-04-25-nepal/files/2015/04/2015-Nepal-EQ-Reconnaissance-Report_Build-Change-2.pdf⟩ (Jul. 7, 2015).
CESMD (Center for Engineering Strong Motion Data). (2016). “Lamjung, Nepal earthquake of 25 April 2015.” ⟨http://www.strongmotioncenter.org/cgi-bin/CESMD/iqr_dist_DM2.pl?IQRID=Lamjung_us20002926$SFlag=0&Flag=3⟩ (Oct. 24, 2016).
Chiaro, G., Kiyota, T., Pokhrel, R. M., Goda, K., Katagiri, T., and Sharma, K. (2015). “Reconnaissance report on geotechnical and structural damage caused by the 2015 Gorkha earthquake, Nepal.” Soils Found., 55(5), 1030–1043.
Chopra, A. K. (2011). Dynamics of structures: Theory and applications to earthquake engineering, 4th Ed., Prentice Hall, Upper Saddle River, NJ.
Dhakal, Y. P., Hisahiko, K., Suzuki, W., Takashi, K., Aoi, S., and Fujiwara, H. (2016). “Analysis of strong motions and site effects at Kantipath, Kathmandu, from 2015 Mw 7.8 Gorkha, Nepal earthquake and its aftershocks.” Earth Planets Space, 68(1), 58.
DoD (Department of Defense). (2013). “Unified facilities design criteria.” Washington, DC.
Galetzka, J. D., et al. (2015). “Slip pulse and resonance of Kathmandu basin during the 2015 Mw 7.8 Gorkha earthquake, Nepal imaged with geodesy.” Science, 349(6252), 1091–1095.
Goda, K., et al. (2015). “The 2015 Gorkha Nepal earthquake: Insights from earthquake damage survey.” Front Built Environ., 1, 8.
Hashash, Y. M. A., et al. (2015). “Geotechnical field reconnaissance: Gorkha (Nepal) earthquake of April 25 2015 and related shaking sequence.”, Geotechnical Extreme Event Reconnaissance, Univ. of Texas at Austin, Austin, TX.
He, W., and Agrawal, A. (2008). “Analytical model of ground motion pulses for the design and assessment of seismic protective systems.” J. Struct. Eng., 1177–1188.
He, W.-L., and Agrawal, A. K. (2002). “A closed-form approximation of near-fault ground motion pulses for flexible structures.” Proc., 15th ASCE Engineering Mechanics Conf. (CD-ROM), ASCE, Reston, VA.
Heo, Y., Kunnath, S., and Abrahamson, N. (2011). “Amplitude-scaled versus spectrum-matched ground motions for seismic performance assessment.” J. Struct. Eng., 278–288.
Huang, N. E., et al. (1998). “The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis.” J. Proc. R. Soc. A, 454(1971), 903–995.
ICC (International Code Council). (2011). “2012 international building code.” Country Club Hills, IL.
Lizundia, B., et al. (2016). “EERI earthquake reconnaissance team report: M7.8 Gorkha, Nepal earthquake on April 25, 2015 and its aftershocks.” ⟨http://www.eqclearinghouse.org/2015-04-25-nepal/files/2016/05/Nepal-Gorkha-Earthquake-Report-Reduced.pdf⟩ (Jul. 6, 2016).
Makris, N., and Chang, S. (2000). “Response of damped oscillators to cycloidal pulses.” J. Eng. Mech., 123–131.
Okamura, M., Bhandary, N. P., Mori, S., Marasini, N., and Hazarika, H. (2015). “Report on a reconnaissance survey of damage in Kathmandu caused by the 2015 Gorkha Nepal earthquake.” Soils Found., 55(5), 1015–1029.
Paquette, J., and Bruneau, M. (2003). “Pseudo-dynamic testing of unreinforced masonry building with flexible diaphragm.” J. Struct. Eng., 708–716.
Parajuli, R. R., and Kiyono, J. (2015). “Ground motion characteristics of the 2015 Gorkha earthquake, survey of damage to stone masonry structures and structural field tests.” Front. Built Environ., 1, 23.
Parameswaran, R. M., et al. (2015). “Seismotectonics of the April-May 2015 Nepal earthquakes: An assessment based on the aftershock patterns, surface effects and deformational characteristics.” J. Asian Earth Sci., 111, 161–174.
SAP2000 version 15 [Computer software]. Computers and Structures, Walnut Creek, CA.
SeismoArtif v2.1.0 [Computer software]. Seismosoft, Pavia, Italy.
SeismoSpect v2.1.0 [Computer software]. Seismosoft, Pavia, Italy.
Surana, S. (2015). “M7.8 Gorkha earthquake post-earthquake building safety evaluations in the kathmandu valley observations and recommendations.” ⟨http://eqclearinghouse.org/wp-content/uploads/2015/07/Nepal_Earthquake_Building_Safety_Evaluation_Report_surana.pdf⟩ (Jul. 24, 2015).
Takai, N., et al. (2016). “Strong ground motion in the Kathmandu Valley during the 2015 Gorkha, Nepal, earthquake.” Earth Planets Space, 68, 10.
USGS (U.S. Geological Survey). (2011). “Worldwide seismic design tool (Beta).” ⟨http://geohazards.usgs.gov/designmaps/ww/⟩ (Aug. 2, 2015).
USGS (U.S. Geological Survey). (2015a). “M7.8—34 km ESE of Lamjung, Nepal.” ⟨http://earthquake.usgs.gov/earthquakes/eventpage/us20002926#general_summary⟩ (May 12, 2015).
USGS (U.S. Geological Survey). (2015b). “Shakemap us20002926.” ⟨http://earthquake.usgs.gov/earthquakes/shakemap/global/shake/20002926/⟩ (May 12, 2015).
Von Thun, J., Roehm, L., Scott, G., and Wilson, J. (1988). “Earthquake ground motions for design and analysis of dams.” Earthquake Eng. Soil Dyn. II, 20, 463–481.
Wang, Y., and Rosowsky, D. (2014). “Effects of earthquake ground motion selection and scaling method on performance-based engineering of wood-frame structures.” J. Struct. Eng., .
Whitney, R., and Agrawal, A. (2015). “Seismic performance of flexible timber diaphragms: Damping, force-displacement and natural period.” Eng. Struct., 101, 583–590.
Whitney, R., and Agrawal, A. (2016). “Direct displacement based seismic design for timber flexible diaphragms in masonry shear wall buildings.” Eng. Struct., 123, 263–274.
Xu, Z., and Agrawal, A. (2010). “Decomposition and effects of pulse components in near-field ground motions.” J. Struct. Eng., 690–699.
Xu, Z., Agrawal, A. K., and Yang, J. N. (2006). “Semi-active and passive control of the Phase I linear base-isolated benchmark building model.” Struct. Control Health Monit., 13(2-3), 626–648.
Zhang, R. R., Ma, S., and Hartzell, S. (2003). “Signatures of the seismic source in EMD-based characterization of the 1994 Northridge, California, earthquake recordings.” Bull. Seismol. Soc. Am., 93(1), 501–518.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 143 • Issue 4 • April 2017
Copyright
©2016 American Society of Civil Engineers.
History
Received: Mar 5, 2016
Accepted: Oct 5, 2016
Published online: Nov 22, 2016
Published in print: Apr 1, 2017
Discussion open until: Apr 22, 2017
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.