Estimating Thrust Forces Resulting from Arching Action of Clay Brick Masonry Infill
Publication: Journal of Structural Engineering
Volume 142, Issue 12
Abstract
ASCE 41 requires that the thrust force effectuated by out-of-plane arching action of masonry infill panels against the bounding frame be considered in the assessment of masonry infill walls for which arching action is relied upon. Hence, a pre-existing but incomplete model for predicting the thrust force was amended with an empirical equation used to estimate the crushing strain of clay brick masonry based on experimental testing of masonry prisms and mortar cubes. The proposed empirical equation was used to estimate the out-of-plane wall rotation of masonry infill specimen panels, and the predicted values were compared with the experimental results from out-of-plane infill wall tests.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abrams, D. P., Angel, R., and Uzarski, J. (1996). “Out-of-plane strength of unreinforced masonry infill panels.” Earthquake Spectra, 12(4), 825–844.
Angel, R., Abrams, D., Shapiro, D., Uzarski, J., and Webster, M. (1994). “Behavior of reinforced concrete frames with masonry infills.”, Dept. of Civil Engineering, Urbana-Champaign, IL.
ASCE. (2014). “Seismic evaluation and retrofit of existing buildings.” ASCE 41-13, Reston, VA.
ASTM. (2011). “Standard test method for compressive strength of masonry prisms.” ASTM C1314-11a, West Conshohocken, PA.
ASTM. (2013). “Standard test method for compressive strength of hydraulic cement mortars (using 2-in. or [50-mm] cube specimens).” ASTM C109/C109M-13, West Conshohocken, PA.
Ewing, B., and Kowalsky, M. (2004). “Compressive behavior of unconfined and confined clay brick masonry.” J. Struct. Eng., 650–661.
Hart, G., Noland, J., Kingsley, G., Englekirck, R., and Sajjad, N. (1988). “The use of confinement steel to increase the ductility in reinforced concrete masonry shear walls.” TMS J., 7(2), T19–T42.
Hogan, L., Walsh, K., Ingham, J., and Dizhur, D. (2015). “Experimental pushover testing of a full-scale existing unreinforced clay brick masonry building.” Proc., 10th Pacific Conf. on Earthquake Engineering, Australian Earthquake Engineering Society (AEES), McKinnon, Australia.
Ingham, J., Walsh, K., Dizhur, D., and Shafaei, J. (2014). “Out-of-plane testing of unreinforced brick infill walls within structural frames.”, Building Research Association of New Zealand (BRANZ), Porirua, New Zealand.
Kaushik, H., Rai, D., and Jain, S. (2007). “Stress-strain characteristics of clay brick masonry under uniaxial compression.” J. Mater. Civ. Eng., 728–739.
Lumantarna, R., Biggs, D., and Ingham, J. (2014). “Uniaxial compressive strength and stiffness of field extracted and laboratory constructed masonry prisms.” J. Mater. Civ. Eng., 567–575.
Mosalam, K., Glascoe, L., and Bernier, J. (2009). “Mechanical properties of unreinforced brick masonry, section 1.”, Lawrence Livermore National Laboratory, Livermore, CA.
Priestley, M. J. N., and Elder, D. (1983). “Stress-strain curves for unconfined and confined concrete masonry.” ACI J., 80(3), 192–201.
TMS (The Masonry Society). (2011). “Building code requirements and specification for masonry structures.”, ASCE, Boulder, CO.
Walsh, K., Cummuskey, P., Dizhur, D., and Ingham, J. (2014). “Structural seismic attributes of Auckland’s commercial building stock.” Proc., New Zealand Society for Earthquake Eng. Conf., New Zealand Society for Earthquake Engineering (NZSEE), Wellington, New Zealand.
Walsh, K., Dizhur, Y., Shafaei, J., Derakhshan, H., and Ingham, J. (2015). “In situ out-of-plane testing of unreinforced masonry cavity walls in as-built and improved conditions.” Structures, 3, 187–199.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: May 2, 2015
Accepted: Jun 15, 2016
Published online: Jul 20, 2016
Published in print: Dec 1, 2016
Discussion open until: Dec 20, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.