Proposal for Defining a Tall Timber Building
Publication: Journal of Structural Engineering
Volume 142, Issue 12
Abstract
Forum papers are thought-provoking opinion pieces or essays founded in fact, sometimes containing speculation, on a civil engineering topic of general interest and relevance to the readership of the journal. The views expressed in this Forum article do not necessarily reflect the views of ASCE or the Editorial Board of the journal.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors’ research is supported by EPSRC Grant EP/M01679X/1 and by a Leverhulme Trust Programme Grant. The authors would like to acknowledge the CTBUH Tall Timber Working Group for highlighting the need for clarification on this topic.
References
Ali, M. M., and Moon, K. S. (2007). “Structural developments in tall buildings: Current trends and future prospects.” Archit. Sci. Rev., 50(3), 205–223.
APA (Engineered Wood Association). (2007). “Technical note: Glulam connection details.”, Tacoma, WA.
Baker, W. F., Horos, D. R., Johnson, B. M., and Schultz, J. A. (2014). “Timber tower research: Concrete jointed timber frame.” Structures Congress 2014, ASCE, Reston, VA, 1255–1266.
Calder, K., Senez, P., and McPhee, R. (2014). “The risk basis for height and area limits in North American building codes.” World Conf. on Timber Engineering (WCTE) 2014, A. Salenikovich, ed., WCTE, Vienna, Austria.
Cho, H. W., Roh, S. G., Byun, Y. M., and Yom, K. S. (2004). “Structural quantity analysis of tall buildings.” CTBUH Conf. Tall Buildings in Historical Cities—Culture & Technology for Sustainable Cities, Seoul, South Korea, CTBUH, Chicago.
City of New York. (2014). “New York City building code.” New York.
Constantinescu, B. (2008). “Romanian architectural wooden cultural heritage—The present status—A survey.” Proc., Int. Conf. Held by Cost Actions IE, Vol. 601, Braga, Portugal, 265–270.
CTBUH (Council for Tall Buildings and Urban Habitats). (2013). “Vanity height: The empty space in today’s tallest.” CTBUH J., 3(3), 42–43.
CTBUH (Council for Tall Buildings and Urban Habitats). (2015). “Criteria for the defining and measuring of tall buildings.” 〈http://www.ctbuh.org/LinkClick.aspx?fileticket=zvoB1S4nMug%3d&tabid=446&language=en-US〉 (Nov. 5, 2015).
Falconer, D. W. (1981). “Classification of tall building systems.” M.S. thesis, Lehigh Univ., Bethlehem, PA.
fib Task Group 1.4. (2014). “Tall buildings: Structural design of concrete buildings up to 300 m tall.” The Concrete Centre and fédération internationale du béton (fib) and MPA, London.
Fragiacomo, M., Menis, A., Clemente, I., Bochicchio, G., and Ceccotti, A. (2013). “Fire resistance of cross-laminated timber panels loaded out of plane.” J. Struct. Eng., 04013018.
Frangi, A., Bochiccio, G., Ceccotti, A., and Lauriola, M. P. (2008). “Natural full-scale fire test on a 3 storey X-Lam timber building.” Proc., 10th World Conf. on Timber Engineering, S. Aratake, ed., Engineered Wood Products Association (EWPA), Australia.
Gagnon, S., and Pirvu, C. (2011). CLT handbook, cross-laminated timber, FP Innovations, Québec.
Gottmann, J. (1966). “Why the skyscraper?” Geog. Rev., 56(2), 190–212.
Green, M., and Karsh, E. (2012). “The case for tall wood buildings.” CC-BY-NC-SA, Vancouver, Canada.
Gunel, M. H., and Ilgin, H. E. (2007). “A proposal for the classification of structural systems of tall buildings.” Build. Environ., 42(7), 2667–2675.
Holmes, O. W. (1904). “Northern securities Co. v. United States.” U.S. Supreme Court, Washington, DC.
Huang, S., Li, Q. S., and Xu, S. (2007). “Numerical evaluation of wind effects on a tall steel building by CFD.” J. Constr. Steel Res., 63(5), 612–627.
IStructE (Institution of Structural Engineers) and TRADA (Timber Research and Development Association). (2007). “Manual for the design of timber building structures to Eurocode 5.” Institution of Structural Engineers, London.
Iyengar, H. (2000). “Reflections on the hancock concept.” CTBUH Rev., 1(1), 44–52.
Khan, F. R. (1969). “Recent structural systems in steel for high-rise buildings.” Proc., Conf. on Steel in Architecture, British Constructional Steelwork Association, London, 55–66.
Klippel, M., Frangi, A., and Hugi, E. (2014). “Experimental analysis of the fire behavior of finger-jointed timber members.” J. Struct. Eng., 04013063.
Kramer, A., Barbosa, A., and Sinha, A. (2015). “Performance of steel energy dissipators connected to cross-laminated timber wall panels subjected to tension and cyclic loading.” J. Struct. Eng., E4015013.
Lam, F., He, M., and Yao, C. (2008) “Example of traditional tall timber buildings in China the Yingxian Pagoda.” Struct. Eng. Int., 18(2), 126–129.
Langenbach, R. (2008). “Building tall with timber: A paean to wood construction.” Struct. Eng. Int., 18(2), 130–132.
Leslie, T. (2010). “Built like bridges: Iron, steel, and rivets in the nineteenth-century skyscraper.” J. Soc. Archit. Historians, 69(2), 234–261.
Malo, K. A., Abrahamsen, R. B., and Bjertnaes, M. A. (2016). “Some structural design issues of the 14-storey timber framed building “Treet” in Norway.” Eur. J. Wood Wood Prod., 1–18.
Moon, K.-S., Connor, J. J., and Fernandez, J. E. (2007). “Diagrid structural systems for tall buildings: Characteristics and methodology for preliminary design.” Struct. Des. Tall Spec. Build., 16(2), 205–230.
Nakaharo, Y. (1990). Japanese joinery: A handbook for joiners and carpenters [Koichi Paul Nii, trans.], Hartley & Marks, Vancouver, Canada.
NEWBuildS. (2015). “Application of analysis tools from NEWBuildS research network in design of a high-rise wood building.” NSERC Strategic Research Network on Innovative Wood Products and Building Systems.
Pearson, A. (2016). “Dalston lane: Tall timber.” 〈http://www.building.co.uk/dalston-lane-tall-timber/5079749.article〉 (Jan. 29, 2016).
Pei, S., et al. (2014). “Cross-laminated timber for seismic regions: Progress and challenges for research and implementation.” J. Struct. Eng., E2514001.
Perkins + Will. (2014). “Summary report: Survey of international tall wood buildings with appendices.” Rep. Prepared for Forestry Innovation Int. and Binational Softwood Lumber Council, Vancouver, BC, Canada.
Reynolds, T., Harris, R., and Chang, W.-S. (2014). “Nonlinear pre-yield modal properties of timber structures with large-diameter steel dowel connections.” Eng. Struct., 76, 235–244.
Robinson, T., Hallova, A., Spiritos, J., and Roelefs, M. (2016). “New heights for renewables: The US Tall Wood Building competition.” CTBUH J., 1, 26–31.
SOM (Skidmore Owings, and Merrill). (2013). “Timber tower research project: Final report.” Chicago.
Thompson, H. (2009). A process revealed—Auf dem Holzweg, A. Waugh, K. H. Weiss, and M. Wells, eds., FUEL, London.
Tomasi, R., and Smith, I. (2015). “Experimental characterization of monotonic and cyclic loading responses of CLT panel-to-foundation angle bracket connections.” J. Mater. Civ. Eng., 04014189.
Willis, C. (1995). Form follows finance: Skyscrapers and skylines in New York and Chicago, Princeton Architectural Press, New York.
Yang, J., et al. (2004). “Benchmark problem for response control of wind-excited tall buildings.” J. Eng. Mech., 437–446.
Yeoh, D., Fragiacomo, M., De Francceschi, M., and Boon, K. H. (2011). “State of the art on timber-concrete composite structures: Literature review.” J. Struct. Eng., 1085–1095.
Zarnani, P., and Quenneville, P. (2014). “Splitting strength of small dowel-type timber connections: Rivet joint loaded perpendicular to grain.” J. Struct. Eng., 04014064.
Zhang, X., Fairhurst, M., and Tannert, T. (2015). “Ductility estimation for a novel timber–steel hybrid system.” J. Struct. Eng., E4015001.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Feb 4, 2016
Accepted: May 25, 2016
Published online: Jul 15, 2016
Published in print: Dec 1, 2016
Discussion open until: Dec 15, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.