Experimental Investigations of Deconstructable Timber–Concrete Composite Beams
Publication: Journal of Structural Engineering
Volume 142, Issue 12
Abstract
In conventional timber–concrete composite (TCC) beams, timber joists and concrete slabs are connected permanently; however, the permanent timber–concrete connections can hinder repairing and reusing of structural components and accordingly it reduces the sustainability of construction. This paper deals with development and structural performance of a few novel deconstructable TCC connections that can facilitate recycling and reusing of construction materials. The structural performance of 16 different sets of novel deconstructable TCC connections under shear loads is investigated by push-out tests followed by bending tests on nine TCC beams under service and ultimate loads. The behavior of connections and beams are characterized and the TCC connections with the highest strength and stiffness and feasibility for construction and dismantling are identified.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This project was funded by an Early Career Research Grant (Faculty of Engineering at UNSW) provided for the second author. The support of the Faculty of Engineering at UNSW Australia to the project is acknowledged with thanks.
References
Ceccotti, A., Fragiacomo, M., and Giordano, S. (2006). “Long-term and collapse tests on a timber-concrete composite beam with glued-in connection.” Mater. Struct., 40(1), 15–25.
CEN (European Committee for Standardization). (1991). “Timber structures—Joints made with mechanical fasteners—General principles for the determination of strength and deformation characteristics.” EN 26891, Brussels, Belgium.
Clouston, P., Bathon, L. A., and Schreyer, A. (2005). “Shear and bending performance of a novel wood-concrete composite system.” J. Struct. Eng., 1404–1412.
Clouston, P., Civjan, S., and Bathon, L. (2004). “Experimental behavior of a continuous metal connector for a wood-concrete composite system.” For. Prod. J., 54(6), 76–84.
Deam, B. L., Fragiacomo, M., and Buchanan, A. H. (2008). “Connections for composite concrete slab and LVL flooring systems.” Mater. Struct., 41(3), 495–507.
Dias, A. M. P. G., Lopes, S. M. R., Van de Kuilen, J. W. G., and Cruz, H. M. P. (2007). “Load-carrying capacity of timber-concrete joints with dowel-type fasteners.” J. Struct. Eng., 720–727.
European Organisation for Technical Approvals. (2013). “SPAX self-tapping screws.” ETA-12/0114, Charlottenlund, Denmark.
Fernandez-Cabo, J. L., Arriaga, F., Majano-Majano, A., and Iñiguez-González, G. (2012). “Short-term performance of the HSB® shear plate-type connector for timber-concrete composite beams.” Constr. Build. Mater., 30, 455–462.
Fragiacomo, M., Amadio, C., and Macorini, L. (2007a). “Short- and long-term performance of the ‘Tecnaria’ stud connector for timber-concrete composite beams.” Mater. Struct., 40(10), 1013–1026.
Fragiacomo, M., Gutkowski, R. M., Balogh, J., and Fast, R. S. (2007b). “Long-term behavior of wood-concrete composite floor/deck systems with shear key connection detail.” J. Struct. Eng., 1307–1315.
Ghafar, N. H. A., Deam, B., and Fragiacomo, M. (2010). “Vibration susceptibility of multi-span LVL-concrete composite floors.” 11th World Conf. on Timber Engineering (WCTE) Riva del Garda, Trees and Timber Institute, National Research Council.
Gurksnys, K., Kvedaras, A., and Kavaliauskas, S. (2005). “Behaviour evaluation of ‘sleeved’ connectors in composite timber-concrete floors.” J. Civ. Eng. Manage., 11(4), 277–282.
Gutkowski, R., Brown, K., Shigidi, A., and Natterer, J. (2008). “Laboratory tests of composite wood-concrete beams.” Constr. Build. Mater., 22(6), 1059–1066.
Gutkowski, R. M., Brown, K., Shigidi, A., and Natterer, J. (2004). “Investigation of notched composite wood-concrete connections.” J. Struct. Eng., 1553–1561.
Jorge, L. F., Lopes, S., and Cruz, H. (2011). “Interlayer influence on timber-LWAC composite structures with screw connections.” J. Struct. Eng., 618–624.
Kavaliauskas, S., Kvedaras, A. K., and Valiunas, B. (2007). “Mechanical behaviour of timber-to-concrete connections with inclined screws.” J. Civ. Eng. Manage., 13(3), 193–199.
Khorsandnia, N., Valipour, H. R., and Crews, K. (2012). “Experimental and analytical investigation of short-term behaviour of LVL-concrete composite connections and beams.” Constr. Build. Mater., 37, 229–238.
Kuhlmann, U., and Schänzlin, J. (2008). “A timber-concrete composite slab system for use in tall buildings.” Struct. Eng. Int., 18(2), 174–178.
LeBorgne, M. R., and Gutkowski, R. M. (2010). “Effects of various admixtures and shear keys in wood-concrete composite beams.” Constr. Build. Mater., 24(9), 1730–1738.
Lukaszewska, E., Fragiacomo, M., and Johnsson, H. (2010). “Laboratory tests and numerical analyses of prefabricated timber-concrete composite floors.” J. Struct. Eng., 46–55.
Lukaszewska, E., Johnsson, H., and Fragiacomo, M. (2008). “Performance of connections for prefabricated timber-concrete composite floors.” Mater. Struct., 41(9), 1533–1550.
Mertens, C., Martin, Y., and Dobbels, F. (2007). “Investigation of the vibration behaviour of timber-concrete composite floors as part of a performance evaluation for the Belgian building industry.” Build. Acoust., 14(1), 25–36.
Monteiro, S. R. S., Dias, A. M. P. G., and Negrão, J. H. J. O. (2013). “Assessment of timber-concrete connections made with glued notches: Test set-up and numerical modeling.” Exp. Tech., 37(2), 50–65.
Rijal, R., Samali, B., Shrestha, R., and Crews, K. (2015). “Experimental and analytical study on dynamic performance of timber-concrete composite beams.” Constr. Build. Mater., 75, 46–53.
Santos, P., Martins, C., Skinner, J., Harris, R., Dias, A., and Godinho, L. (2015). “Modal frequencies of a reinforced timber-concrete composite floor: Testing and modeling.” J. Struct. Eng., 04015029.
Sathre, R., and O’Connor, J. (2010). “A synthesis of research on wood products and greenhouse gas impacts.”, FPInnovations, Vancouver, BC, Canada.
Schäfers, M., and Seim, W. (2011). “Investigation on bonding between timber and ultra-high performance concrete (UHPC).” Constr. Build. Mater., 25(7), 3078–3088.
Standards Australia Limited. (1996). “Coach screws—Metric series with ISO hexagon heads.” AS/NZS1393, Sydney, Australia.
Standards Australia Limited. (1998). “Steel structures.” AS4100, Sydney, Australia.
Standards Australia Limited. (1999). “Determination of the compressive strength of concrete specimens.” AS1012.9, Sydney, Australia.
Standards Australia Limited. (2000). “ISO metric hexagon bolts and screws—Product grades A and B—Bolts.” AS1110.1, Sydney, Australia.
Standards Australia Limited. (2010). “Structural steel—Hot-rolled bars and sections.” AS/NZS3679.1, Sydney, Australia.
Standards Australia/Standards New Zealand. (2006). “Structural laminated veneer lumber (LVL)—Part 2: Determination of structural properties—Test methods.” AS/NZS4357.2, Sydney/Wellington, Australia.
Steinberg, E., Selle, R., and Faust, T. (2003). “Connectors for timber-lightweight concrete composite structures.” J. Struct. Eng., 1538–1545.
To, L., Fragiacomo, M., Balogh, J., and Gutkowski, R. M. (2011). “Long-term load test of a wood-concrete composite beam.” Proc. Inst. Civ. Eng.: Struct. Build., 164(2), 155–163.
van de Kuilen, J. W. G., and Dias, A. M. P. G. (2011). “Long-term load-deformation behaviour of timber-concrete joints.” Proc. Inst. Civ. Eng.: Struct. Build., 164(2), 143–154.
Yeoh, D., Fragiacomo, M., and Deam, B. (2011a). “Experimental behaviour of LVL-concrete composite floor beams at strength limit state.” Eng. Struct., 33(9), 2697–2707.
Yeoh, D., Fragiacomo, M., De Franceschi, M., and Buchanan, A. H. (2011b). “Experimental tests of notched and plate connectors for LVL-concrete composite beams.” J. Struct. Eng., 261–269.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Dec 31, 2015
Accepted: May 4, 2016
Published online: Jul 13, 2016
Published in print: Dec 1, 2016
Discussion open until: Dec 13, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.