Determination of Bond Stress Distribution Coefficient by Maximum Likelihood Method
Publication: Journal of Structural Engineering
Volume 142, Issue 5
Abstract
Transfer length is a significant parameter in the design of pretensioned concrete members. The estimation of transfer length is typically achieved by measuring concrete strain or strand slip at the member ends. The end slip method is simple and requires little effort, but relies on an empirical formula with an undetermined coefficient (), which relates to the bond stress distribution. Many studies have proposed appropriate coefficients; however, the variability in estimating the coefficient exists between studies depending on the chosen empirical fit. This study gives an estimation of the coefficient using a probabilistic approach called the maximum likelihood (ML) method. Approximately 600 data points of transfer lengths and strand end slips were measured for 25 pretensioned concrete beams. Strand end slips were measured at release and at 3, 5, 7, 14, and 28 days. Concrete strains were measured at the same period of time using a detachable mechanical strain (DEMEC) gauge to determine the transfer lengths. An estimated coefficient of 2.61 maximized the likelihood of the observed sample of the measured transfer lengths and end slips.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to acknowledge the financial and technical support from the Arkansas State Highway and Transportation Department (AHTD) and the Mack-Blackwell Rural Transportation Center (MBTC). Advice on implementation of the ML method from Luca D’Angelo at the Swiss Federal Institute of Technology (EPFL) is appreciated.
References
AASHTO. (2012). LRFD bridge design specifications, 6th Ed., Washington, DC.
ACI (American Concrete Institute). (2014). “Building code requirements for structural concrete (ACI 318-14) and commentary (ACI 318 R-14).”, Farmington Hills, MI.
Akhnoukh, A. K. (2008). “Development of high performance precast/prestressed bridge girders.” Ph.D. thesis, Univ. of Nebraska-Lincoln, Lincoln, NE.
ASTM. (2012a). “Standard specification for steel strand, uncoated seven-wire for prestressed concrete.”, West Conshohocken, PA.
ASTM. (2012b). “Standard test method for evaluating bond of seven-wire steel prestressing strand.”, West Conshohocken, PA.
ASTM. (2014a). “Standard test method for passing ability of self-consolidating concrete by j-ring.”, West Conshohocken, PA.
ASTM. (2014b). “Standard test method for slump flow of self-consolidating concrete.”, West Conshohocken, PA.
ASTM. (2015). “Standard test method for relative density (specific gravity) and absorption of coarse aggregate.”, West Conshohocken, PA.
Balazs, G. L. (1993). “Transfer length of prestressing strand as a function of draw-in and initial prestress.” PCI J., 38(2), 86–93.
Barnes, R. W., Grove, J. W., and Burns, N. H. (2003). “Experimental assessment of factors affecting transfer length.” ACI Struct. J., 100(6), 740–748.
Barr, P. J., and Angomas, F. (2010). “Differences between calculated and measured long-term deflections in a prestressed concrete girder bridge.” J. Perform. Constr. Facil., 603–609.
Bymaster, J. C., Dang, C. N., Floyd, R. W., and Hale, W. M. (2015). “Prestress losses in pretensioned concrete beams cast with lightweight self-consolidating concrete.” Structures, 2, 50–57.
Dang, C. N., Murray, C. D., Floyd, R. W., Micah Hale, W., and Martí-Vargas, J. R. (2014a). “A correlation of strand surface quality to transfer length.” ACI Struct. J., 111(5), 1245–1252.
Dang, C. N., Murray, C. D., Floyd, R. W., Micah Hale, W., and Martí-Vargas, J. R. (2014b). “Analysis of bond stress distribution for prestressing strand by standard test for strand bond.” Eng. Struct., 72, 152–159.
Den Uijl, J. A. (1998). “Bond modelling of prestressing strand.” ACI Spec. Publ., 180, 145–170.
Floyd, R. W. (2012). “Investigating the bond of prestressing strands in lightweight self-consolidating concrete.” Ph.D. dissertation, Univ. of Arkansas, Fayetteville, AR.
Idriss, R. L., and Solano, A. (2002). “Effects of steam curing temperature on early prestress losses in high-performance concrete beams.” Transp. Res. Rec., 1813(1), 218–228.
Khayat, K., and Mitchell, D. (2009). “Self-consolidating concrete for precast, prestressed concrete bridge elements.”, Transportation Research Board, Washington, DC.
Martí-Vargas, J. R., Arbelaez, C. A., Serna-Ros, P., and Castro-Bugallo, C. (2007). “Reliability of transfer length estimation from strand end slip.” ACI Struct. J., 104(4), 487–494.
Martí-Vargas, J. R., Arbelaez, C. A., Serna-Ros, P., Fernandez-Prada, M. A., and Miguel-Sosa, P. F. (2006). “Transfer and development lengths of concentrically prestressed concrete.” PCI J., 51(5), 74–85.
Mitchell, D., Cook, W. D., Khan, A. A., and Tham, T. (1993). “Influence of high strength concrete on transfer and development length of pretensioning strand.” PCI J., 38(3), 52–66.
Montgomery, D. C., and Runger, G. C. (2010). Applied statistics and probability for engineers, Wiley, New York, 223–250.
Myung, I. J. (2003). “Tutorial on maximum likelihood estimation.” J. Math. Psychol., 47(1), 90–100.
Oh, B. H., and Kim, E. S. (2000). “Realistic evaluation of transfer lengths in pretensioned, prestressed concrete members.” ACI Struct. J., 97(6), 821–830.
Osborn, A. E. N., Lawler, J. S., and Connolly, J. D. (2008). “Acceptance tests for surface characteristics of steel strands in prestressed concrete.”, Transportation Research Board, Washington, DC.
Park, H., and Cho, J. (2014). “Bond-slip-strain relationship in transfer zone of pretensioned concrete elements.” ACI Struct. J., 111(3), 503–514.
Park, H., Din, Z. U., and Cho, J. (2012). “Methodological aspects in measurement of strand transfer length in pretensioned concrete.” ACI Struct. J., 109(5), 625–634.
PCI (Precast-Prestressed Concrete Institute). (2010). PCI design handbook: Precast and prestressed concrete, Chicago.
Ramirez, J. A., and Russell, B. W. (2008). “Transfer, development, and splice length for strand/reinforcement in high strength concrete.”, Transportation Research Board, Washington, DC.
Rose, D., and Russell, B. (1997). “Investigation of standardized tests to measure the bond performance of prestressing strand.” PCI J., 42(4), 56–80.
Russell, B. W., and Burns, N. (1997). “Measurement of transfer lengths on pretensioned concrete elements.” J. Struct. Eng., 541–549.
Russell, B. W., and Burns, N. H. (1993). “Design guidelines for transfer, development and debonding of large diameter seven wire strands in pretensioned concrete girders.”, Texas Dept. of Transportation, Austin, TX.
Russell, B. W., and Burns, N. H. (1996). “Measured transfer lengths of 0.5 and 0.6 in. strands in pretensioned concrete.” PCI J., 41(5), 44–65.
Scholz, F. W. (2004). “Maximum likelihood estimation.” Encyclopedia of statistical sciences, Wiley, New York, 1–11.
Steinberg, E., Beier, J., and Sargand, S. (2001). “Effects of sudden prestress force transfer in pretensioned concrete beams.” PCI J., 46(1), 64–75.
Storm, T. K., Rizkalla, S. H., and Zia, P. Z. (2013). “Effects of production practices on camber of prestressed concrete bridge girders.” PCI J., 58(1), 96–111.
Tadros, M. K. (2015). “Camber variability in ]prestressed concrete bridge beams.” Concrete bridge magazine, Aspire, 38–42.
Unay, I. O., Russell, B., Burns, N., and Kreger, M. (1991). “Measurement of transfer length on prestressing strands in prestressed concrete specimens.”, Federal Highway Administration, Austin, TX.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Jun 5, 2014
Accepted: Oct 27, 2015
Published online: Jan 6, 2016
Published in print: May 1, 2016
Discussion open until: Jun 6, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.