Vibration of Prestressed Cable RC Truss Floor System due to Human Activity
Publication: Journal of Structural Engineering
Volume 142, Issue 5
Abstract
Vibration has become a serious serviceability problem due to the large openings of girder, lightweight floor systems, and high-strength materials used in practice. The results from both heel-drop and jumping floor vibration tests of a large-span prestressed cable RC truss (PCT) floor system are presented. System parameters such as peak acceleration, fundamental frequency, and damping ratios were considered and studied. The results and comparisons were taken based on the on-site test data. The comparison results indicate inconsistencies with the heel-drop or jumping impact models proposed by other researchers. The results from heel-drop and jumping tests were comprehensively compared against published codes. Based on the classic plate theory, a derived accurate formula for a PCT floor system is proposed. Lastly, a simplified method is suggested, which uses the constant moment of inertia for the cross section of a PCT girder.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors are grateful for the financial support provided by the National Natural Science Foundation of China (51378244, 51178210, 51438001). The authors also appreciate Prof. Chen Y. for providing helpful discussions and Dr. Yang Yuan-Long for helping collect the data.
References
Abeysinghe, C. M., Thambiratnam, D. P., and Perera, N. J. (2013). “Dynamic performance characteristics of an innovative hybrid composite floor plate system under human-induced loads.” Compos. Struct., 96, 590–600.
AISC/CISC (American/Canada Institute of Steel Construction). (1997). “Steel design guide series no. 11: Floor vibrations due to human activity.” Chicago.
ATC (Applied Technology Council). (1999). “ATC design guide. 1: Minimizing floor vibration.” Redwood, CA.
BSI (British Standards Institution). (2008). “Guide to evaluation of human exposure to vibration in buildings. 1: Vibration sources other than blasting.” BS 6472-1, London.
Chen, Y., and Aswad, A. (1994). “Vibration characteristics of double tee building floors.” PCI J., 39(1), 84–95.
Chopra, A. K. (2001). Dynamics of structures: Theory and applications to earthquake engineering, 2nd Ed., Prentice-Hall, Upper Saddle River, NJ.
Clough, R. W., and Penzien, J. (2003). Dynamics of structures, 3rd Ed., Computers & Structures, Berkeley, CA.
Concrete Society. (1994). “Post-tensioned concrete floors-design handbook.”, Singapore.
Davis, B., and Murray, T. M. (2009). “Slender monumental stair vibration serviceability.” J. Archit. Eng., 111–121.
Dolan, J. D., Murray, T. M., Johnson, J. R., Runte, D., and Shue, B. C. (1999). “Preventing annoying wood floor vibrations.” J. Struct. Eng., 19–24.
Ebrahimpour, A., and Sack, R. L. (1989). “Modeling dynamic occupant loads.” J. Struct. Eng., 1476–1496.
Gentile, C., and Gallino, N. (2008). “Ambient vibration testing and structural evaluation of an historic suspension footbridge.” Adv. Eng. Soft., 39(4), 356–366.
Gere, J. M., and Goodno, B. J. (2009). Mechanics of material, 7th Ed., Cengage Learning, Toronto.
ISO (International Organization for Standardization). (1989). “Mechanical vibration and shock—Evaluation of human exposure to whole-body vibration. 2: Vibration in buildings (1 HZ to 80 HZ).” ISO2631-2, Geneva.
Jia, Z., and Zhou, X. (2011). “Experimental study of vibration behavior of cold-formed steel concrete composite floor.” Chin, Civ. Eng. J., 44(4), 42–51 (in Chinese).
Mello, A. V. A., da Silva, J. G. S., da S. Vellascoc, P. C. G., de Andradec, S. A. L., and de Limac, L. R. O. (2008). “Dynamic analysis of composite systems made of concrete slabs and steel beams.” J. Constr. Steel Res., 64(10), 1142–1151.
MOHURD (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). (2010a). “Code for design of concrete structures.” GB50010-2010, China Architecture and Building, Beijing.
MOHURD (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). (2010b). “Technical specification for concrete structures of tall buildings.” JGJ3-2010, China Architecture and Building, Beijing.
Murray, T. M. (1975). “Design to prevent floor vibrations.” Eng. J. Am. Inst. Steel Constr., 12(3), 82–87.
Ohmart, R. D. (1968). “An approximate method for the response of stiffened plates to a periodic excitation.”, Univ. of Kansas, Lawrence, KS.
Pavic, A., and Reynolds, P. (2003). “Modal testing and dynamic FE model correlation and updating of a prototype high-strength concrete floor.” Cem. Concr. Compos., 25(7), 787–799.
Racic, V., and Pavic, A. (2009). “Mathematical model to generate asymmetric pulses due to human jumping.” J. Eng. Mech., 1206–1211.
Racic, V., and Pavic, A. (2010). “Mathematical model to generate near-periodic human jumping force signals.” Mech. Syst. Signal Process., 24(1), 138–152.
Sim, J., Blakeborough, A., Williams, M., and Parkhouse, G. (2008). “Statistical model of crowd jumping loads.” J. Struct. Eng., 1852–1861.
Thomson, W. T. (1972). Theory of vibration with applications, Prentice-Hall, Englewood Cliffs, NJ.
Timoshenko, S., and Woinowsky, S. (1959). Theory of plates and shells, 2nd Ed., McGraw-Hill, New York.
Tuan, C. Y., and Saul, W. E. (1985). “Loads due to spectator movements.” J. Struct. Eng., 418–434.
Živanović, S., Pavic, A., and Reynolds, P. (2005). “Vibration serviceability of footbridges under human-induced excitation: A literature review.” J. Sound Vib., 279(1–2), 1–74.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Oct 7, 2014
Accepted: Sep 22, 2015
Published online: Dec 17, 2015
Published in print: May 1, 2016
Discussion open until: May 17, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.