Review and Assessment of Design Methodologies for Perforated Steel Beams
Publication: Journal of Structural Engineering
Volume 142, Issue 2
Abstract
Designing perforated steel beams is always a practical challenge in steel construction. There are a number of design methods available in the literature for design of these structural members. However, the range of applicability and accuracy of these methods in estimating the resistance of perforated beams is not known precisely. In this paper, an extensive statistical analysis is performed on numerical and laboratory test results to evaluate different formulas used to estimate the ultimate strength of perforated beams. Considered specimens include noncomposite steel beams with unreinforced openings of rectangular, circular, and elongated circular shape. The effect of different parameters including opening size, opening shape, moment to shear ratio, web slenderness ratio, and dimensional limits are discussed. Based on the results, all of the proposed relations are somehow conservative. However, one of the studied equations is found to give more reliable predictions for most of the cases. Finally, a trend analysis is performed to modify the equation presented in ASCE standard and results are verified against numerical and experimental data that showed a good agreement.
Get full access to this article
View all available purchase options and get full access to this article.
References
AISC. (2010). “Seismic provisions for structural steel buildings.” ANSI/AISC 341, Chicago.
Akrami, V., and Erfani, S. (2015). “Effect of local web buckling on the cyclic behavior of reduced web beam sections (RWBS).” Steel Compos. Struct., 18(3), 641–657.
ASCE. (1997). “Proposed specification for structural steel beams with web opening.”, Reston, VA.
Bayramoglu, G. (2012). “Reliability analysis of tested steel I-beams with web openings.” Struct. Eng. Mech., 41(5), 575–589.
Bower, J. E. (1968). “Ultimate strength of beams with rectangular holes.” J. Struct. Div., 94(ST6), 1315–1338.
BSI (British Standards Institution). (1993). “Design of steel structures. 1-1: General rules and rules for buildings.”, London.
BSI (British Standards Institution). (1994). “Design of composite steel and concrete structures.”, London.
Chung, K. F. (2012). “Recent advances in design of steel and composite beams with web openings.” Adv. Struct. Eng., 15(9), 203–233.
Chung, K. F., Ko, C. H., and Wang, A. J. (2005). “Design of steel and composite beams with web openings: Verification using finite element method.” Steel Compos. Struct., 5(2–3), 203–233.
Chung, K. F., and Lawson, R. M. (2001). “Simplified design of composite beams with large web openings to Eurocode 4.” J. Constr. Steel Res., 57(2), 135–164.
Chung, K. F., Liu, C. H., and Ko, A. C. H. (2001). “Investigation on Vierendeel mechanism in steel beams with circular web openings.” J. Constr. Steel Res., 57(5), 467–490.
Chung, K. F., Liu, C. H., and Ko, A. C. H. (2003). “Steel beams with large web openings of various shapes and sizes: An empirical design method using a generalised moment-shear interaction curve.” J. Constr. Steel Res., 59(9), 1177–1200.
Clawson, W. C., and Darwin, D. (1980). “Composite beams with web openings.”, Univ. of Kansas, Lawrence, KS.
Congdon, J. G., and Redwood, R. G. (1970). “Plastic behavior of beams with reinforced holes.” J. Struct. Div., 96(ST9), 1933-1956.
Darwin, D. (1990). “Steel and composite beams with web openings.”, AISC, Chicago.
Darwin, D., and Lucas, W. K. (1990). “LRFD for steel and composite beams with web openings.” J. Struct. Eng., 1579–1593.
Lawson, R. M. (1987). “Design for openings in the webs of composite beams.”, The Steel Construction Institute, Berkshire, U.K.
Lawson, R. M., and Hicks, S. J. (2012). “Design of composite beams with large web openings.”, The Steel Construction Institute, Berkshire, U.K.
Lawson, R. M., Lim, J., Hicks, S. J., and Simms, W. I. (2006). “Design of composite asymmetric cellular beams and beams with large web openings.” J. Constr. Steel Res., 62(6), 614–629.
Lee, E. T., Chang, K. H., Shim, H. J., and Kim, J. H. (2004). “Local buckling behavior of steel members with web opening under cyclic loading.” 7th Pacific Structural Steel Conf., AISC, Chicago.
Redwood, R. G., Baranda, H., and Daly, M. J. (1978). “Tests of thin-webbed beams with unreinforced holes.” J. Struct. Div., 104(ST3), 577–595.
Redwood, R. G., and Cho, S. H. (1993). “Design of steel and composite beams with web openings.” J. Constr. Steel Res., 25(1–2), 23–41.
Redwood, R. G., and McCutcheon, J. O. (1968). “Beam tests with unreinforced web openings.” J. Struct. Div., 94(ST1), 1–18.
Tsavdaridis, K. D., and D’Mello, C. (2012). “Vierendeel bending study of perforated steel beams with various novel web opening shapes through nonlinear finite-element analyses.” J. Struct. Eng., 1214–1230.
Verweij, J. G. (2010). “Cellular beam-columns in portal frame structures.” Master’s thesis, Dept. of Civil Engineering, Delft Univ. of Technology, Delft, Netherlands.
Wang, X., Yin, Z., Li, Q., and Shen, Sh. (2007). “Experimental study of beam-column connections with web opening in a low-rise steel frame.” Struct. Eng. Mech., 26(3), 263–276.
Ward, J. K. (1990). “Design for composite and non-composite cellular beams.”, The Steel Construction Institute, Berkshire, U.K.
Yang, Q., Li, B., and Yang, N. (2009). “Aseismic behaviors of steel moment resisting frames with opening in beam web.” J. Constr. Steel Res., 65(6), 1323–1336.
Information & Authors
Information
Published In
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Mar 4, 2015
Accepted: Aug 18, 2015
Published online: Oct 16, 2015
Published in print: Feb 1, 2016
Discussion open until: Mar 16, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.