Autonomous Monitoring of Dynamic Response of In-Service Structures for Decision Support
Publication: Journal of Structural Engineering
Volume 141, Issue 1
Abstract
This paper describes instrumentation and autonomous, Web-enabled remote monitoring of in-service structures to resolve concerns. Structures were subject to dynamic excitation from blasting, construction equipment, and passing trains. An integrated approach to sensing, data acquisition, communication, data aggregation, and display was developed and successfully applied to structures ranging from bridges to homes. Challenges encountered and best practices developed over many multiyear continuous remote monitoring deployments are discussed. Deployment of monitoring and communication hardware and software and development of robust, autonomous, data aggregation, dissemination, and interpretation strategies are emphasized. Three selected case studies provide context and demonstrate applications of field monitoring to real-world situations on in-service structures. Autonomously acquired data were used to allay fears of construction vibration-related damage to a historic building, possible loss of capacity of bridge columns under quasi-static and dynamic loads, and blast-induced cracking of residences.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was funded by the Northwestern University Infrastructure Technology Institute (ITI). The contributions of ITI research engineers Daniel Marron, Mathew Kotowsky, Brian Quezada, and the late Daniel Hogan to development and deployment of field monitoring systems are gratefully acknowledged. Many ITI students contributed to field monitoring work. The efforts of Remi Baillot and Jeff Meissner were particularly important to this article.
References
Baillot, R. (2004). “Crack response of a historic structure to weather effects and construction vibrations.” M.S. thesis, Northwestern Univ., Evanston, IL.
Balageas, D., Fritzen, C.-P., and Güemes, A. (2006). Structural health monitoring, Wiley-ISTE, London.
Dowding, C. H. (2001). “Measure the crack instead of construction vibrations.” Geo-Strata—Geo Inst. ASCE, 2(3), 20–23.
Dowding, C. H. (2008). “Properties of micrometer displacement sensors.” Chapter 3, Micrometer crack response to vibration and weather, International Society of Explosives Engineers, Cleveland, OH, 45–70.
Dowding, C. H., Marron, D., and Baillot, R. (2007). “Response of historic structure to long-term environmental and construction vibration.” Proc., 7th Int. Symp. on Field Measurements in Geomechanics (FMGM7), American Society of Civil Engineers, Reston, VA.
Fraser, M., Elgamal, A., He, X., and Conte, J. P. (2010). “Sensor network for structural health monitoring of a highway bridge.” J. Comput. Civ. Eng., 11–24.
Friswell, M., and Mottershead, J. (1995). Finite element model updating in structural dynamics, Kluwer Academic Publishers, Amsterdam, The Netherlands.
Hoult, N. A., Fidler, P. R. A., Hill, P. G., and Middleton, C. R. (2010). “Long-term wireless structural health monitoring of the Ferriby Road Bridge.” J. Bridge Eng., 153–159.
Kosnik, D. E. (2008). “Autonomous crack displacement monitoring of a residence near a limestone quarry, Naples, Florida.”, Infrastructure Technology Institute, Northwestern Univ., Evanston, IL.
Kosnik, D. E. (2012). “A Web-enabled data management system for structural health monitoring of civil infrastructure.” Ph.D. thesis, Northwestern Univ., Evanston, IL.
Lynch, J., Sundararajan, A., Law, K., Sohn, H., and Farrar, C. (2004). “Design of a wireless active sensing unit for structural health monitoring.” Proc., SPIE 5394, Health Monitoring and Smart Nondestructive Evaluation of Structural and Biological Systems III, International Society for Optics and Photonics, 157–168.
Lynch, J., Wang, Y., Loh, K., Yi, J.-H., and Yun, C.-B. (2006). “Performance monitoring of the Geumdang Bridge using a dense network of high-resolution wireless sensors.” Smart Mater. Struct., 15(6), 1561–1575.
Meissner, J. E., and Dowding, C. H. (2009). “Response of a concrete block structure to quarry induced ground motion and weather.”, Infrastructure Technology Institute, Northwestern Univ., Evanston, IL.
Nair, K., and Kiremidjian, A. (2006). “Time series based structural damage detection algorithm using Gaussian mixtures modeling.” J. Dyn. Syst. Meas. Control, 129(3), 285–293.
Noh, H., Nair, K., Kiremidjian, A., and Loh, C.-H. (2009). “Application of time series based damage detection algorithms to the benchmark experiment at the National Center for Research on Earthquake Engineering (NCREE) in Taipei, Taiwan.” Smart Struct. Syst., 5(1), 95–117.
Peck, R. (1988). “Foreword.” Geotechnical instrumentation for monitoring field performance, Dunnicliff, J., ed., Wiley, New York, 7–9.
Sohn, H., Czarnecki, J., and Farrar, C. (2000). “Structural health monitoring using statistical process control.” J. Struct. Eng., 1356–1363.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: May 4, 2013
Accepted: Feb 4, 2014
Published online: Jul 8, 2014
Discussion open until: Dec 8, 2014
Published in print: Jan 1, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.