Numerical Retrofit Study of Light-Frame Wood Buildings Using Shape Memory Alloy Devices as Seismic Response Modification Devices
Publication: Journal of Structural Engineering
Volume 140, Issue 7
Abstract
Woodframe buildings have historically performed well during earthquakes primarily because of their high strength/stiffness to weight ratio. Even still, these structures possess the potential for significant damage and even collapse when exposed to very large earthquakes. New design techniques and advanced technologies can provide an alternative for improved building performance. The use of dampers and other seismic response modification devices is one such method being explored in earthquake engineering. In this paper, shape memory alloy (SMA) devices are investigated for the response modification of light-frame wood buildings during strong earthquakes. A numerical model for a suite of SMA wood shearwalls is developed based on existing data. The numerical models of the shearwalls are examined using incremental dynamic analysis at the single wall level. Design charts are developed for the shearwall models for a range of seismic weights and targeted performance levels. The wall database is then used to demonstrate retrofit of a four-story apartment building. The interstory drift was reduced by over 55% when SMA devices are used for response modification of the four-story apartment building.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study is supported by the National Science Foundation under Grant No. 23487 and is a supplemental project to the NEES-Soft project. J. W. L. acknowledges support from the Garry Neil Drummond Endowed Chair fund at the University of Alabama and the George T. Abell Professorship funds at Colorado State University.
References
ASCE. (2010). “Minimum design loads for buildings and other structures.” ASCE/SEI 7-10, Reston, VA.
DesRoches, R., McCormick, J., and Delemont, M. (2004). “Cyclic properties of superelastic shape memory alloy wires and bars.” J. Struct. Eng., 38–46.
Dolce, M., Cardone, D., and Marnetto, R. (2000). “Implementation and testing of passive control devices based on shape memory alloys.” Earthquake Eng. Struct. Dyn., 29(7), 945–968.
Dolce, M., and Cardone, D. (2001). “Mechanical behavior of shape memory alloys for seismic applications 2. Austenite NiTi wires subjected to tension.” Int. J. Mech. Sci., 43(11), 2657–2677.
FEMA. (2009). “Quantification of building seismic performance factors.”, Washington, DC.
Filiatrault, A., and Folz, B. (2002). “Performance-based seismic design of wood framed buildings.” J. Struct. Eng., 39–47.
Pang, W., Rosowsky, D., Pei, S., and van de Lindt, J. (2010). “Simplified direct displacement design of six-story woodframe building and pretest seismic performance assessment.” J. Struct. Eng., 813–825.
Pei, S., and van de Lindt, J. (2007). User’s manual for SAPWood for Windows, version 1.0, 〈http://www.engrcolostate.edy/NEESWOOD/〉 (Mar. 10, 2008).
Priestley, M. J. N. (1998). “Displacement-based approaches to rational limit states design of new structures.” Proc. 11th European Conf. on Earthquake Engineering, Paris, France.
Symans, M. D., et al. (2008). “Energy dissipation systems for seismic applications: Current practice and recent developments.” J. Struct. Eng., 3–21.
Symans, M. D., Cofer, W. F., and Fridley, K. J. (2002). “Base isolation and supplemental damping systems for seismic protection of wood structures: Literature review.” Earthquake Spectra, 18(3), 549–572.
van de Lindt, J., Pei, S., Pryor, S., Shimizu, H., and Isoda, H. (2010). “Experimental seismic response of a full-scale six-story light-frame wood building.” J. Struct. Eng., 1262–1272.
van de Lindt, J., Pei, S., Pang, W., and Shirazi, S. (2012). “Collapse testing and analysis of a light-frame wood garage wall.” J. Struct. Eng., 492–501.
van de Lindt, J., and Potts, A. (2008). “Shake table testing of a superelastic shape memory alloy response modification device in a wood shearwall.” J. Struct. Eng., 1343–1352.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Dec 28, 2012
Accepted: Sep 18, 2013
Published online: Apr 1, 2014
Published in print: Jul 1, 2014
Discussion open until: Sep 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.